Lightwave Logic, Inc. 10-Q

UNITED STATES SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 _____________________ FORM 10-Q ____________________ (Mark One) ☒ QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the quarterly period ended September 30, 2023 OR ☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the transition period from _____________to _____________ Commission File Number 001-40766 Lightwave Logic, Inc. (Exact name of registrant as specified in its charter) Nevada (State or other jurisdiction of incorporation or organization) 82-0497368 (I.R.S. Employer Identification No.) 369 Inverness Parkway , Suite 350 Englewood , CO (Address of principal executive offices) 80112 (Zip Code) ( 720 ) 340-4949 (Registrant’s telephone number, including area code) Securities registered pursuant to Section 12(b) of the Act: Title of each class Trading Symbol(s) Name of exchange on which registered Common Stock, $0.001 par value per share LWLG The NASDAQ Stock Market Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐ Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐ Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act: Large accelerated filer ☒ Accelerated filer ☐ Non-accelerated filer ☐ Smaller reporting company ☐ Emerging growth company ☐ If an emerging growth company, indicate by checkmark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐ Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act.) Yes ☐ No ☒ The number of shares of the registrant’s common stock outstanding as of November 9, 2023 was 116,886,949 . TABLE OF CONTENTS Page Part I Financial Information Item 1 Financial Statements 1 Item 2 Management’s Discussion and Analysis of Financial Condition and Results of Operations 20 Item 3 Quantitative and Qualitative Disclosures About Market Risk 38 Item 4 Controls and Procedures 39 Part II Other Information Item 1 Legal Proceedings 40 Item 1A Risk Factors 40 Item 2 Unregistered Sales of Equity Securities, Use of Proceeds, and Issuer Purchases of Equity Securities 41 Item 3 Defaults Upon Senior Securities 41 Item 4 Mine Safety Disclosures 41 Item 5 Other Information 41 Item 6 Exhibits 41 Signatures 42 i Forward-Looking Statements This report on Form 10-Q contains, and our officers and representatives may from time to time make, “forward-looking statements” within the meaning of the safe harbor provisions of the U.S. Private Securities Litigation Reform Act of 1995. Forward-looking statements can be identified by words such as: “anticipate,” “intend,” “plan,” “goal,” “seek,” “believe,” “project,” “estimate,” “expect,” “continuing,” “ongoing,” “strategy,” “future,” “likely,” “may,” “should,” “could,” “will” and similar references to future periods. Examples of forward-looking statements include, among others, statements we make regarding expected operating results, such as anticipated revenue; anticipated levels of capital expenditures for our current fiscal year; our belief that we have, or will have, sufficient liquidity to fund our business operations during the next 12 months; strategy for gaining customers, growth, product development, market position, financial results and reserves. Forward-looking statements are neither historical facts nor assurances of future performance. Instead, they are based only on our current beliefs, expectations, and assumptions regarding the future of our business, future plans and strategies, projections, anticipated events and trends, the economy and other future conditions. Because forward-looking statements relate to the future, they are subject to inherent uncertainties, risks and changes in circumstances that are difficult to predict and many of which are outside of our control. Our actual results and financial condition may differ materially from those indicated in the forward-looking statements. Therefore, you should not rely on any of these forward-looking statements. Important factors that could cause our actual results and financial condition to differ materially from those indicated in the forward-looking statements include, among others, the following: inability to generate significant revenue or to manage growth; lack of available funding; lack of a market for or market acceptance of our products; competition from third parties; general economic and business conditions; intellectual property rights of third parties; changes in the price of our stock and dilution;  regulatory constraints and potential legal liability;  ability to maintain effective internal controls; security breaches, cybersecurity attacks and other significant disruptions in our information technology systems; changes in technology and methods of marketing; delays in completing various engineering and manufacturing programs; changes in customer order patterns and qualification of new customers; changes in product mix; success in technological advances and delivering technological innovations; shortages in components; production delays due to performance quality issues with outsourced components; other risks to which our Company is subject; and  other factors beyond the Company’s control.     The ultimate correctness of these forward-looking statements depends upon a number of known and unknown risks and events. We discuss our known material risks under Part I Item 1.A “Risk Factors” contained in our Company’s Annual Report on Form 10-K for the year ended December 31, 2022, and Part II, Item 1.A “Risk Factors” in this report on Form 10-Q. Many factors could cause our actual results to differ materially from the forward-looking statements. In addition, we cannot assess the impact of each factor on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements. The forward-looking statements speak only as of the date on which they are made, and, except as required by law, we undertake no obligation to update any forward-looking statement to reflect events or circumstances after the date on which the statement is made or to reflect the occurrence of unanticipated events. ii PART I – FINANCIAL INFORMATION Item 1 Financial Statements LIGHTWAVE LOGIC, INC. FINANCIAL STATEMENTS SEPTEMBER 30, 2023 (UNAUDITED) Page Balance Sheets 2 Statements of Comprehensive Loss 3 Statement of Stockholders’ Equity 4 Statements of Cash Flow 6 Notes to Financial Statements 7 - 19 1 LIGHTWAVE LOGIC, INC. BALANCE SHEETS September 30, 2023 December 31, 2022 (Unaudited) ASSETS CURRENT ASSETS Cash and cash equivalents $ 30,876,646 $ 24,102,151 Prepaid expenses and other current assets 563,023 611,345 Loan receivable — 642,120 TOTAL CURRENT ASSETS 31,439,669 25,355,616 PROPERTY AND EQUIPMENT - NET 3,597,111 2,519,267 OTHER ASSETS Intangible assets - net 1,182,693 1,030,335 Operating Lease - Right of Use - Building 2,884,544 358,254 TOTAL OTHER ASSETS 4,067,237 1,388,589 TOTAL ASSETS $ 39,104,017 $ 29,263,472 LIABILITIES AND STOCKHOLDERS' EQUITY CURRENT LIABILITIES Accounts payable $ 429,520 $ 791,671 Accrued expenses 121,134 380,280 Accounts payable and accrued expenses - related parties 91,612 100,169 Deferred revenue 50,000 — Deferred lease liability 41,778 41,778 Operating lease liability 138,434 190,125 TOTAL CURRENT LIABILITIES 872,478 1,504,023 LONG TERM LIABILITIES Deferred lease liability 6,963 38,297 Operating lease liability 2,804,357 168,129 TOTAL LONG TERM LIABILITIES 2,811,320 206,426 TOTAL LIABILITIES 3,683,798 1,710,449 STOCKHOLDERS' EQUITY Preferred stock, $ 0.001 par value, 1,000,000 authorized, No shares issued or outstanding — — Common stock $ 0.001 par value, 250,000,000 authorized, 116,683,977 and 112,882,793 issued and outstanding at September 30, 2023 and December 31, 2022 116,684 112,883 Additional paid-in-capital 158,731,989 134,406,825 Deferred compensation ( 496,737 ) ( 133,324 ) Accumulated deficit ( 122,931,717 ) ( 106,833,361 ) TOTAL STOCKHOLDERS' EQUITY 35,420,219 27,553,023 TOTAL LIABILITIES AND STOCKHOLDERS' EQUITY $ 39,104,017 $ 29,263,472 See accompanying notes to these financial statements. 2 LIGHTWAVE LOGIC, INC. STATEMENTS OF COMPREHENSIVE LOSS FOR THE THREE MONTHS AND NINE MONTHS ENDING SEPTEMBER 30, 2023 AND 2022 (UNAUDITED) For the Three For the Three For the Nine For the Nine Months Ending Months Ending Months Ending Months Ending September 30, 2023 September 30, 2022 September 30, 2023 September 30, 2022 NET SALES $ — $ — $ — $ — COST AND EXPENSE Research and development 4,040,941 3,587,692 12,006,758 8,994,047 General and administrative 1,345,335 1,144,624 3,879,515 3,017,191 TOTAL COST AND EXPENSE 5,386,276 4,732,316 15,886,273 12,011,238 LOSS FROM OPERATIONS ( 5,386,276 ) ( 4,732,316 ) ( 15,886,273 ) ( 12,011,238 ) OTHER INCOME (EXPENSE) Interest income 246,987 29,125 403,960 57,545 Commitment fee ( 25,302 ) ( 73,170 ) ( 607,728 ) ( 181,027 ) Other Expense — ( 27,022 ) ( 8,315 ) ( 27,022 ) NET LOSS $ ( 5,164,591 ) $ ( 4,803,383 ) $ ( 16,098,356 ) $ ( 12,161,742 ) LOSS PER SHARE Basic $ ( 0.04 ) $ ( 0.04 ) $ ( 0.14 ) $ ( 0.11 ) Diluted $ ( 0.04 ) $ ( 0.04 ) $ ( 0.14 ) $ ( 0.11 ) WEIGHTED AVERAGE NUMBER OF SHARES Basic 116,491,837 112,111,706 114,899,056 111,536,100 Diluted 116,491,837 112,111,706 114,899,056 111,536,100 See accompanying notes to these financial statements. 3 LIGHTWAVE LOGIC, INC. STATEMENT OF STOCKHOLDERS’ EQUITY (UNAUDITED) NINE-MONTH PERIOD ENDED SEPTEMBER 30, 2023 Additional Number of Common Paid-in Deferred Accumulated Shares Stock Capital Compensation Deficit Total BALANCE AT DECEMBER 31, 2022 112,882,793 $ 112,883 $ 134,406,825 $ ( 133,324 ) $ ( 106,833,361 ) $ 27,553,023 Common stock issued to institutional investor 2,750,400 2,750 16,061,159 — — 16,063,909 Common stock issued for commitment shares 99,407 100 607,628 — — 607,728 Common stock sales at the market by investment banking company 172,115 172 1,378,302 — — 1,378,474 Exercise of options 504,408 504 466,820 — — 467,324 Exercise of warrants 169,000 169 164,581 — — 164,750 Options issued for services — — 5,085,114 — — 5,085,114 Restricted stock awards issued for future services 105,854 106 561,560 ( 561,666 ) — — Deferred compensation — — — 198,253 — 198,253 Net loss for the nine months ending September 30, 2023 — — — — ( 16,098,356 ) ( 16,098,356 ) BALANCE AT SEPTEMBER 30, 2023 (UNAUDITED) 116,683,977 $ 116,684 $ 158,731,989 $ ( 496,737 ) $ ( 122,931,717 ) $ 35,420,219 NINE-MONTH PERIOD ENDED SEPTEMBER 30, 2022 Additional Number of Common Paid-in Deferred Accumulated Shares Stock Capital Compensation Deficit Total BALANCE AT DECEMBER 31, 2021 110,555,459 $ 110,556 $ 114,696,597 $ — $ ( 89,602,881 ) $ 25,204,272 Common stock issued to institutional investor 1,325,000 1,325 10,707,968 — — 10,709,293 Common stock issued for commitment shares 19,672 19 181,008 — — 181,027 Exercise of options 268,200 268 229,672 — — 229,940 Cashless exercise of 4,375 options 2,596 3 35,015 — — 35,018 Exercise of warrants 175,000 175 240,575 — — 240,750 Options issued for services — — 4,288,172 — — 4,288,172 Restricted stock awards issued for future services 28,500 29 274,995 ( 275,024 ) — — Deferred compensation — — — 67,467 — 67,467 Net loss for the nine months ending September 30, 2022 — — — — ( 12,161,742 ) ( 12,161,742 ) BALANCE AT SEPTEMBER 30, 2022 (UNAUDITED) 112,374,427 $ 112,375 $ 130,654,002 $ ( 207,557 ) $ ( 101,764,623 ) $ 28,794,197 See accompanying notes to these financial statements. 4 LIGHTWAVE LOGIC, INC. STATEMENT OF STOCKHOLDERS’ EQUITY (UNAUDITED) THREE-MONTH PERIOD ENDED SEPTEMBER 30, 2023 Additional Number of Common Paid-in Deferred Accumulated Shares Stock Capital Compensation Deficit Total BALANCE AT JUNE 30, 2023 (UNAUDITED) 116,184,724 $ 116,185 $ 154,946,488 $ ( 519,466 ) $ ( 117,767,126 ) $ 36,776,081 Common stock issued to institutional investor 175,000 175 1,113,325 — — 1,113,500 Common stock issued for commitment shares 3,777 4 25,298 — — 25,302 Common stock sales at the market by investment banking company 97,115 97 734,848 — — 734,945 Exercise of options 198,123 198 160,825 — — 161,023 Exercise of warrants 19,000 19 14,231 14,250 Options issued for services — — 1,695,310 — — 1,695,310 Restricted stock awards issued for future services 6,238 6 41,664 ( 41,670 ) — Deferred compensation — — — 64,399 — 64,399 Net loss for the three months ending September 30, 2023 — — — — ( 5,164,591 ) ( 5,164,591 ) BALANCE AT SEPTEMBER 30, 2023 (UNAUDITED) 116,683,977 $ 116,684 $ 158,731,989 $ ( 496,737 ) $ ( 122,931,717 ) $ 35,420,219 THREE-MONTH PERIOD ENDED SEPTEMBER 30, 2022 Additional Number of Common Paid-in Deferred Accumulated Shares Stock Capital Compensation Deficit Total BALANCE AT JUNE 30, 2022 (UNAUDITED) 111,887,124 $ 111,888 $ 125,040,332 $ ( 231,803 ) $ ( 96,961,240 ) $ 27,959,177 Common stock issued to institutional investor 450,000 450 4,003,150 — — 4,003,600 Common stock issued for commitment shares 7,353 7 73,163 — — 73,170 Exercise of options 29,950 30 47,735 — — 47,765 Options issued for services — — 1,489,622 — — 1,489,622 Deferred compensation — — — 24,246 — 24,246 Net loss for the three months ending September 30, 2022 — — — — ( 4,803,383 ) ( 4,803,383 ) BALANCE AT SEPTEMBER 30, 2022 (UNAUDITED) 112,374,427 $ 112,375 $ 130,654,002 $ ( 207,557 ) $ ( 101,764,623 ) $ 28,794,197 See accompanying notes to these financial statements. 5 LIGHTWAVE LOGIC, INC. STATEMENTS OF CASH FLOW (UNAUDITED) For the Nine For the Nine Months Ending Months Ending September 30, 2023 September 30, 2022 CASH FLOWS FROM OPERATING ACTIVITIES Net loss $ ( 16,098,356 ) $ ( 12,161,742 ) Adjustments to reconcile net loss to net cash used in operating activities Stock options issued for services 5,085,114 4,288,172 Amortization of deferred compensation 198,253 67,467 Cashless option exercise — 53,219 Common stock issued for services and fees 607,728 181,027 Depreciation and amortization of patents 797,500 758,285 Amortization of right of use asset 138,502 132,556 Loss on disposal of property and equipment 581 — (Increase) decrease in assets Prepaid expenses and other current assets 87,058 ( 414,766 ) (Decrease) increase in liabilities Accounts payable ( 362,151 ) 367,048 Accrued expenses ( 259,146 ) ( 1,004,081 ) Accounts payable and accrued expenses- related parties ( 8,557 ) 131,368 Deferred revenue 50,000 — Deferred lease liability ( 31,334 ) ( 31,334 ) Operating lease liability ( 118,990 ) ( 132,556 ) Net cash used in operating activities ( 9,913,798 ) ( 7,765,337 ) CASH FLOWS FROM INVESTING ACTIVITIES Cost of intangibles ( 215,061 ) ( 47,705 ) Purchase of property and equipment ( 1,813,813 ) ( 1,171,530 ) Loan repayment 642,120 ( 588,180 ) Sale of property and equipment 590 — Net cash used in investing activities ( 1,386,164 ) ( 1,807,415 ) CASH FLOWS FROM FINANCING ACTIVITIES Exercise of options and warrants 632,074 470,690 Cashless option exercise tax payments — ( 18,201 ) Issuance of common stock, institutional investor 16,063,909 10,709,293 At the market sale by investment banking company 1,378,474 — Net cash provided by financing activities 18,074,457 11,161,782 NET INCREASE IN CASH AND CASH EQUIVALENTS 6,774,495 1,589,030 CASH AND CASH EQUIVALENTS - BEGINNING OF PERIOD 24,102,151 23,432,612 CASH AND CASH EQUIVALENTS - END OF PERIOD $ 30,876,646 $ 25,021,642 Supplemental Disclosure of Non-cash investing and financing activities : Amended Operating Lease - Right of Use - Building and Operating lease liability $ 2,703,527 $ — See accompanying notes to these financial statements. 6 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 1- NATURE OF BUSINESS AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES Financial Statements The accompanying unaudited financial statements have been prepared by Lightwave Logic, Inc. (the “Company”). These statements include all adjustments (consisting only of its normal recurring adjustments) which management believes necessary for a fair presentation of the statements and have been prepared on a consistent basis using the accounting polices described in the Summary of Significant Accounting Policies included in the financial statements and notes thereto included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2022, as filed with the Securities and Exchange Commission on March 1, 2023 (the “2022 Annual Report”). Certain financial information and footnote disclosures normally included in financial statements prepared in accordance with accounting principles generally accepted in the United States have been condensed or omitted pursuant to the rules and regulations of the Securities and Exchange Commission, although the Company firmly believes that the accompanying disclosures are adequate to make the information presented not misleading. The financial statements should be read in conjunction with the financial statements and notes thereto included in the 2022 Annual Report. The interim operating results for the three and nine months ending September 30, 2023 may not be indicative of operating results expected for the full year. Nature of Business Lightwave Logic, Inc. is a technology company focused on the development of next generation photonic devices and electro-optic polymer materials systems for applications in high speed fiber-optic data communications, telecommunications and optical computing markets. The Company's first revenue stream is from a technology material supply and licensing agreement that incorporates the Company's patented electro-optic polymer materials for use in manufacturing photonic devices. Currently the Company is in various stages of photonic device and materials development and evaluation with potential customers and strategic partners. The Company expects to obtain additional revenue from material supply and licensing agreements, technology transfer agreements and the production and direct sale of its own photonic devices. The Company’s current development activities are subject to significant risks and uncertainties, including failing to secure additional funding to operationalize the Company’s technology now under development. Revenue Recognition In accordance with FASB ASC 606, Revenue from Contracts with Customers, the Company recognizes revenue upon transfer of promised goods or services in an amount that reflects the consideration expected to be received in exchange for those goods or services. To determine revenue recognition for arrangements within the scope of FASB ASC 606, the Company performs the following five steps: 1. Identify the contract with the customer. 2. Identify the performance obligations in the contract. 3. Determine the transaction price. 4. Allocate the transaction price to the performance obligations in the contract. 5. Recognize revenue as (or when) the performance obligations are satisfied. 7 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 1- NATURE OF BUSINESS AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (CONTINUED) Revenue Recognition (Continued) For product sales, revenue will be recognized at a point in time when the product is shipped or is delivered to the customer’s location. For services performed, revenue will be recognized at a point in time when the service is performed. However, for certain contracts, revenue will be recognized over time as the customer simultaneously receives and consumes the benefits of performance as the Company performs the service. For license agreements, each contract is reviewed to determine the portion of the revenue recognition at the point in time that the license is transferred to the customer and the portion of the revenue recognition to be recognized over time. Stock-based Payments The Company accounts for stock-based compensation under the provisions of Financial Accounting Standards Board (FASB) Accounting Standards Codification (ASC) 718, "Compensation - Stock Compensation", which requires the measurement and recognition of compensation expense for all stock-based awards made to employees and directors based on estimated fair values on the grant date. The fair value of restricted stock awards is estimated by the market price of the Company’s common stock at the date of grant. Restricted stock awards are being amortized to expense over the vesting period. The Company estimates the fair value of option and warrant awards on the date of grant using the Black-Scholes model. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service periods using the straight-line method. In June 2018, the FASB issued ASU No. 2018-07, Compensation – Stock Compensation (Topic 718), Improvements to Nonemployee Share-Based Payment Accounting (the “2018 Update). The amendments in the 2018 Update expand the scope of Topic 718 to include share-based payment transactions for acquiring goods and services from nonemployees. Prior to the 2018 Update, Topic 718 applied only to share- based transactions to employees. Consistent with the accounting requirement for employee share-based payment awards, nonemployee share-based payment awards within the scope of Topic 718 are measured at grant-date fair value of the equity instruments that an entity is obligated to issue when the good has been delivered or the service has been rendered and any other conditions necessary to earn the right to benefit from the instruments have been satisfied. The Company has elected to account for forfeiture of stock-based awards as they occur. 8 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 1- NATURE OF BUSINESS AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (CONTINUED) Loss Per Share The Company follows FASB ASC 260, “Earnings per Share”, resulting in the presentation of basic and diluted earnings per share. Because the Company reported a net loss in 2023 and 2022, common stock equivalents, including stock options and warrants were anti-dilutive; therefore, the amounts reported for basic and dilutive loss per share were the same. Comprehensive Income The Company follows FASB ASC 220.10, “Reporting Comprehensive Income (Loss).” Comprehensive income (loss) is a more inclusive financial reporting methodology that includes disclosure of certain financial information that historically has not been recognized in the calculation of net income (loss). Since the Company has no items of other comprehensive income (loss), comprehensive income (loss) is equal to net income (loss). Recently Issued Accounting Pronouncements Not Yet Adopted As of September 30, 2023, there are no recently issued accounting standards not yet adopted which would have a material effect on the Company’s financial statements. Recently Adopted Accounting Pronouncements As of September 30, 2023 and for the period then ended, there are no recently adopted accounting standards that have a material effect on the Company’s financial statements. Reclassifications Certain reclassifications have been made to the 2022 financial statement in order to conform to the 2023 financial statement presentation. NOTE 2 – MANAGEMENT’S PLANS Our future expenditures and capital requirements will depend on numerous factors, including: the progress of our research and development efforts; the rate at which we can, directly or through arrangements with original equipment manufacturers, introduce and sell products incorporating our polymer materials technology; the costs of filing, prosecuting, defending and enforcing any patent claims and other intellectual property rights; market acceptance of our products and competing technological developments; and our ability to establish cooperative development, joint venture and licensing arrangements. We expect that we will incur approximately $ 1,750,000 of expenditures per month over the next 12 months. Our current cash position enables us to finance our operations through April 2025. On February 28, 2023, the Company entered into a purchase agreement with the institutional investor to sell up to $ 30,000,000 of common stock over a 36-month period (described in Note 10). Pursuant to the purchase agreement, the Company received $ 876,250 in October and November 2023 and a remaining available amount of $ 16,907,148 is available to the Company per the agreement. On December 9, 2022, the Company entered into a sales agreement with an investment banking company whereby the Company may offer and sell shares of its common stock having an aggregate offering price of up to $ 35,000,000 from time to time through or to the investment banking company, as sales agent or principal (described in Note 10). There were no sales of shares of the Company’s common stock pursuant to the sales agreement in October and November 2023. The remaining available amount of $ 33,578,860 is available to the Company per the agreement. The Company's first commercial agreement occurred in May 2023 from a material supply and license agreement that incorporates the Company's patented electro-optic polymer materials for use in manufacturing photonic devices (described in Note 3). During October 2023, the licensee requisitioned material under this agreement. Our cash requirements are expected to increase at a rate consistent with the Company’s path to full commercialization as we expand our activities and operations. We currently have no debt to service. 9 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 3 – REVENUE The Company's first commercial agreement occurred in May 2023, the form of a (4) year material supply and license agreement (the “License Agreement”) that incorporates the Company's patented electro-optic polymer materials for use in manufacturing photonic devices (the “Licensed Product”). The licensee shall pay the Company a running royalty with a minimum royalty paid on an annual basis over the term of the License Agreement. Additional future revenue will be generated from royalties from the licensee’s sale of Licensed Product that exceed the minimum royalty payments. The License Agreement is a non-exclusive material supply and license agreement. Timing of Revenue Recognition and Contract Balances All revenues are recognized over time commencing with the License Agreement in May 2023. No revenues were recognized for the three and nine month period ending September 30, 2023 since the licensee did not requisition material as of September 30, 2023. An up-front licensing fee in the amount of $ 50,000 was paid during the nine month period ending September 30, 2023 and is recorded in short term liability deferred revenue in the Company’s balance sheet as of September 30, 2023. Contract balances are as follows: Schedule of contract balances September 30, 2023 December 31, 2022 Accounts receivable, net $ — $ — Short-term contract assets $ — $ — Long-term contract assets $ — $ — Short-term liability deferred revenue $ 50,000 $ — Long-term liability deferred revenue $ — $ — 10 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 3 – REVENUE (CONTINUED) Assets Recognized for the Costs to Obtain a Contract There are no assets recognized for the costs to obtain the License Agreement. NOTE 4 – LOAN RECEIVABLE On September 7, 2022, the Company entered into a convertible loan agreement (the “Loan”) with an entity and issued a loan on September 12, 2022 in the amount of EUR 600,000 bearing interest at 7 % per annum with a maturity date of March 31, 2023 . The loan and interest were repaid in February and March 2023. The Company recorded $ 0 and $ 11,125 of interest income for the three and nine months ended September 30, 2023 and used the average exchange rate for the conversion of the EUR denominated interest income for the period. NOTE 5 – PREPAID EXPENSES AND OTHER CURRENT ASSETS Prepaid expenses and other current assets consist of the following: Schedule of prepaid expenses and other current assets September 30, 2023 December 31, 2022 Insurance $ 316,315 $ 218,767 License 79,357 94,195 Prototype devices 40,473 40,473 Lease incentive receivable 38,736 — Rent 36,525 36,525 Investor relations 33,433 18,250 Other 18,184 45,675 Legal — 83,941 Deposit for equipment — 59,850 Loan interest receivable — 13,669 Prepaid expenses and other current assets $ 563,023 $ 611,345 NOTE 6 – PROPERTY AND EQUIPMENT Property and equipment consist of the following: Schedule of property and equipment September 30, 2023 December 31, 2022 Office equipment $ 136,734 $ 119,404 Lab equipment 7,852,126 6,234,777 Furniture 74,119 33,128 Leasehold Improvements 321,815 184,843 8,384,794 6,572,152 Less: Accumulated depreciation 4,787,683 4,052,885 $ 3,597,111 $ 2,519,267 11 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 6 – PROPERTY AND EQUIPMENT (CONTINUED) Depreciation expense for the nine months ending September 30, 2023 and 2022 was $ 734,798 and $ 699,423 . Depreciation expense for the three months ending September 30, 2023 and 2022 was $ 242,454 and $ 246,507 . During the nine months ending September 30, 2023, the Company sold equipment for proceeds of $ 590 and a loss of $ 581 . During the three and nine months ending September 30, 2022, the Company retired $ 70,963 of leasehold improvements. NOTE 7 – INTANGIBLE ASSETS This represents legal fees and patent fees associated with the prosecution of patent applications. The Company has recorded amortization expense on patents granted, which are amortized over the remaining legal life. Maintenance patent fees are paid to a government patent authority to maintain a granted patent in force. Some countries require the payment of maintenance fees for pending patent applications. Maintenance fees paid after a patent is granted are expensed, as these are considered ongoing costs to “maintain a patent”. Maintenance fees paid prior to a patent grant date are capitalized to patent costs, as these are considered “patent application costs”. No amortization expense has been recorded on the remaining patent applications since patents on these applications have yet to be granted. Patents consist of the following: Schedule of patents September 30, 2023 December 31, 2022 Patents $ 1,821,124 $ 1,606,064 Less: Accumulated amortization 638,431 575,729 Total intangible assets $ 1,182,693 $ 1,030,335 Amortization expense for the nine months ending September 30, 2023 and 2022 was $ 62,703 and $ 58,862 . Amortization expense for the three months ending September 30, 2023 and 2022 was $ 24,000 and $ 15,229 . There were no patent costs written off for the three and nine months ending September 30, 2023 and 2022. NOTE 8 – LEASES On October 30, 2017, the Company entered into a lease agreement to lease approximately 13,420 square feet of office, chemistry, clean room and research and development space located in Colorado for the Company’s principal executive offices and research and development facility. The term of the lease was sixty one ( 61 ) months, beginning on November 1, 2017 and ending on November 30, 2022 . During January 2022, the term was extended for an additional twenty-four ( 24 ) months. Base rent for the first year of the lease term is approximately $ 168,824 , with an increase in annual base rent of approximately 3 % in each subsequent year of the lease term. As specified in the lease, the Company paid the landlord (i) all base rent for the period November 1, 2017 and ending on October 31, 2019, in the sum of $ 347,045 ; and (ii) the estimated amount of tenant’s proportionate share of operating expenses for the same period in the sum of $ 186,293 . Commencing on November 1, 2019, monthly installments of base rent and one-twelfth of landlord’s estimate of tenant’s proportionate share of annual operating expenses shall be due on the first day of each calendar month. The lease also provides that (i) on November 1, 2019 landlord shall pay the Company for the cost of the cosmetic improvements in the amount of $3.00 per rentable square foot of the premises, and (ii) on or prior to November 1, 2019, the Company shall deposit with Landlord the sum of $ 36,525 as a security deposit which shall be held by landlord to secure the Company’s obligations under the lease. On October 30, 2017, the Company entered into an agreement with the tenant leasing the premise from the landlord (“Original Lessee”) whereby the Original Lessee agreed to pay the Company the sum of $260,000 in consideration of the Company entering into the lease and landlord agreeing to the early termination of the Original Lessee’s lease agreement with landlord. The consideration of $ 260,000 was received on November 1, 2017. 12 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 8 – LEASES (CONTINUED) Due to the adoption of the new lease standard, the Company has capitalized the present value of the minimum lease payments commencing November 1, 2019, including the additional option period using an estimated incremental borrowing rate of 6.5 %. The minimum lease payments do not include common area annual expenses which are considered to be non-lease components. As of January 1, 2019 the operating lease right-of-use asset and operating lease liability amounted to $ 885,094 with no cumulative-effect adjustment to the opening balance of retained earnings/accumulated deficit. On November 22, 2022, the Company entered into an amendment to the Lease (“the Amended Lease”) to lease an additional approximately 9,684 square feet of adjacent office and warehouse space. The term of the Amended Lease is one hundred twenty ( 128 ) months, with an effective date of June 1, 2023 . Base rent through January 31, 2024 of the Amended Lease term is approximately $ 30,517 per month. The base rent for the next full year of the Amended Lease term is approximately $ 377,288 , with an increase in annual base rent of approximately 3 % in each subsequent year of the lease term. Commencing on June 1, 2023, monthly installments of base rent and one-twelfth of landlord’s estimate of tenant’s proportionate share of annual operating expenses shall be due on the first day of each calendar month. The Amended Lease also provides an allowance of up to $ 38,736 to be used solely for the cost of renovations to the additional lease premises. As of June 1, 2023, the operating lease right-of-use asset and operating lease liability amounted to $ 2,945,322 . The Company has elected not to recognize right-of-use assets and lease liabilities arising from short-term leases. There are no other material operating leases. The Company is obligated under the Amended Lease for office, chemistry, clean room and research and development space. The aggregate minimum future lease payments under the Amended Lease, including the extended term are as follows: Schedule of future lease payments of operating leases YEARS ENDING DECEMBER 31, AMOUNT 2023 $ 91,550 2024 376,364 2025 387,666 2026 399,199 2027 411,174 Thereafter 2,781,183 4,447,136 Less discounted interest ( 1,504,345 ) TOTAL $ 2,942,791 13 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 8 – LEASES (CONTINUED) Rent expense amounting to $ 160,660 and $ 53,553 is included in research and development and general and administrative expenses for the nine months ended September 30, 2023. Rent expense amounting to $ 103,796 and $ 34,599 is included in research and development and general and administrative expenses for the nine months ended September 30, 2022. Rent expense amounting to $ 85,104 and $ 28,368 is included in research and development and general and administrative expenses for the three months ended September 30, 2023. Rent expense amounting to $ 34,599 and $ 11,533 is included in research and development and general and administrative expenses for the three months ended September 30, 2022. NOTE 9 – INCOME TAXES There is no income tax benefit for the losses for the nine months ended September 30, 2023 and 2022 since management has determined that the realization of the net deferred tax asset is not assured and has created a valuation allowance for the entire amount of such benefits. The Company’s policy is to record interest and penalties associated with unrecognized tax benefits as additional income taxes in the statement of operations. As of January 1, 2023, the Company had no unrecognized tax benefits, or any tax related interest or penalties. There were no changes in the Company’s unrecognized tax benefits during the period ended September 30, 2023. The Company did not recognize any interest or penalties during 2022 related to unrecognized tax benefits. With few exceptions, the U.S. and state income tax returns filed for the tax years ending on December 31, 2019 and thereafter are subject to examination by the relevant taxing authorities. NOTE 10 – STOCKHOLDERS’ EQUITY Preferred Stock Pursuant to the Company’s Articles of Incorporation, the Company’s board of directors is empowered, without stockholder approval, to issue series of preferred stock with any designations, rights and preferences as they may from time to time determine. The rights and preferences of this preferred stock may be superior to the rights and preferences of the Company’s common stock; consequently, preferred stock, if issued could have dividend, liquidation, conversion, voting or other rights that could adversely affect the voting power or other rights of the common stock. Additionally, preferred stock, if issued, could be utilized, under special circumstances, as a method of discouraging, delaying or preventing a change in control of the Company’s business or a takeover from a third party. 14 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 10 – STOCKHOLDERS’ EQUITY (CONTINUED) Common Stock Options and Warrants In January 2019, the Company signed a purchase agreement with the institutional investor to sell up to $ 25,000,000 of common stock. The Company registered 9,500,000 shares pursuant to a registration statement filed on January 30, 2019 which became effective February 13, 2019. The Company issued 350,000 shares of common stock to the institutional investor as an initial commitment fee valued at $ 258,125 , fair value, and 812,500 shares of common stock are reserved for additional commitment fees to the institutional investor in accordance with the terms of the purchase agreement. The Company registered an additional 6,000,000 shares pursuant to a registration statement filed on January 24, 2020 which became effective February 4, 2020. The Company registered an additional 8,000,000 shares pursuant to a registration statement filed on November 20, 2020 which became effective November 20, 2020. During the period January 2019 through September 30, 2022 the institutional investor purchased 22,337,500 shares of common stock for proceeds of $ 23,773,924 and the Company issued 772,666 shares of common stock as additional commitment fee, valued at $ 1,575,509 , fair value, leaving 39,834 in reserve for additional commitment fees. During the three and nine month periods ending September 30, 2023, the institutional investor did no t purchase any shares of common stock. All the registered shares under the purchase agreement have been issued as of September 30, 2023. On July 2, 2021, the Company filed a $100,000,000 universal shelf registration statement with the U.S. Securities and Exchange Commission which became effective on July 9, 2021. On October 4, 2021, the Company entered into a purchase agreement with the institutional investor to sell up to $ 33,000,000 of common stock over a 36-month period. Concurrently with entering into the purchase agreement, the Company also entered into a registration rights agreement which provides the institutional investor with certain registration rights related to the shares issued under the purchase agreement. Pursuant to the purchase agreement, the Company issued 30,312 shares of common stock to the institutional investor as an initial commitment fee valued at $ 279,174 , fair value, and 60,623 shares of common stock are reserved for additional commitment fees to the institutional investor in accordance with the terms of the purchase agreement. During the period October 4, 2021 through September 30, 2023, the institutional investor purchased 3,632,456 shares of common stock for proceeds of $ 33,000,000 and the Company issued 60,623 shares of common stock as additional commitment fee, valued at $ 694,531 , fair value. During the nine month period ending September 30, 2023, pursuant to the purchase agreement, the institutional investor purchased 779,945 shares of common stock for proceeds of $ 3,847,307 and the Company issued 7,069 shares of common stock as additional commitment fee, valued at $ 38,161 , fair value. During the three month period ending September 30, 2023, the Company did not issue any shares pursuant to this purchase agreement. All of the registered shares under the purchase agreement have been issued as of September 30, 2023. 15 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 10 – STOCKHOLDERS’ EQUITY (CONTINUED) Common Stock Options and Warrants (Continued) On February 28, 2023, the Company entered into a purchase agreement with an institutional investor to sell up to $ 30,000,000 of common stock over a 36-month period. Concurrently with entering into the purchase agreement, the Company also entered into a registration rights agreement which provides the institutional investor with certain registration rights related to the shares issued under the purchase agreement. Pursuant to the purchase agreement, the Company issued 50,891 shares of common stock to the institutional investor as an initial commitment fee valued at $ 279,391 , fair value, and 101,781 shares of common stock are reserved for additional commitment fees to the institutional investor in accordance with the terms of the purchase agreement. During the period February 28, 2023 through September 30, 2023, the institutional investor purchased 1,970,455 shares of common stock for proceeds of $ 12,216,602 and the Company issued 41,447 shares of common stock as additional commitment fee, valued at $ 290,176 , fair value. During the three month period ending September 30, 2023, pursuant to the purchase agreement, the institutional investor purchased 175,000 shares of common stock for proceeds of $ 1,113,500 and the Company issued 3,777 shares of common stock as additional commitment fee, valued at $ 25,302 fair value. During October and November 2023, pursuant to the purchase agreement, the institutional investor purchased 200,000 shares of common stock for proceeds of $ 876,250 and the Company issued 2,972 shares of common stock as additional commitment fee, valued at $ 14,221 , fair value, leaving 57,362 in reserve for additional commitment fees. On December 9, 2022, the Company entered into a sales agreement with an investment banking company. In accordance with the terms of this sales agreement, the Company may offer and sell shares of its common stock having an aggregate offering price of up to $ 35,000,000 from time to time through or to the investment banking company, as sales agent or principal. Sales of shares of the Company’s common stock, if any, may be made by any method deemed to be an “at the market offering”. The sales agent is entitled to compensation under the terms of the sales agreement at a commission rate equal to 3 % of the gross proceeds of the sales price of common stock that they sell. During the nine month period ending September 30, 2023, pursuant to the sales agreement, the investment banking company sold 172,115 shares of the Company’s common stock for proceeds of $ 1,378,474 after a payment of the commission in the amount of $ 42,634 to the investment banking company. During the three month period ending September 30, 2023, pursuant to the sales agreement, the investment banking company sold 97,115 shares of the Company’s common stock for proceeds of $ 734,945 after a payment of the commission in the amount of $ 22,731 to the investment banking company. During October and November 2023, pursuant to the sales agreement, the investment banking company did not sell any shares of the Company’s common stock. Restricted Stock Awards On March 16, 2023, the Compensation Committee of the Board of Directors approved grants totaling 99,616 Restricted Stock Awards to the Company’s four outside directors. Each RSA had a grant date fair value of $ 5.22 which shall be amortized on a straight-line basis over the vesting period into director’s compensation expenses within the Consolidated Statement of Comprehensive Loss. Such RSAs were granted under the 2016 Equity Incentive Plan (“2016 Plan”) and vest in total 8,338 shares on March 16, 2023, with the remaining vesting in 33 equal monthly installments in total of 2,766 shares beginning April 1, 2023. On August 1, 2023, the Compensation Committee of the Board of Directors approved a grant totaling 6,238 Restricted Stock Awards to the Company’s outside director. The new RSA had a grant date fair value of $ 6.68 which shall be amortized on a straight-line basis over the vesting period into director’s compensation expenses within the Consolidated Statement of Comprehensive Loss. Such RSA was granted under the 2016 Equity Incentive Plan (“2016 Plan”). 218 shares from this grant vested on August 1, with the remaining vesting in 28 equal monthly installments in total of 215 shares beginning September 1, 2023. Upon the occurrence of a Change in Control, 100% of the unvested Restricted Stock shall vest as of the date of the Change in Control. Upon vesting, the restrictions on the shares lapse. 16 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 11 – STOCK BASED COMPENSATION During 2007, the Board of Directors of the Company adopted the 2007 Employee Stock Plan (“2007 Plan”) that was approved by the shareholders. Under the 2007 Plan, the Company is authorized to grant options to purchase up to 10,000,000 shares of common stock to directors, officers, employees and consultants who provide services to the Company. The 2007 Plan is intended to permit stock options granted to employees under the 2007 Plan to qualify as incentive stock options under Section 422 of the Internal Revenue Code of 1986, as amended (“Incentive Stock Options”). All options granted under the 2007 Plan, which are not intended to qualify as Incentive Stock Options are deemed to be non-qualified options (“Non-Statutory Stock Options”). Effective June 24, 2016, the 2007 Plan was terminated. As of September 30, 2023, options to purchase 2,473,000 shares of common stock have been issued and are outstanding. During 2016, the Board of Directors of the Company adopted the 2016 Plan that was approved by the shareholders at the 2016 annual meeting of shareholders on May 20, 2016. Under the 2016 Plan, the Company is authorized to grant awards of incentive and non-qualified stock options and restricted stock to purchase up to 3,000,000 shares of common stock to employees, directors and consultants. Effective May 16, 2019, the number of shares of the Company’s common stock available for issuance under the 2016 Plan was increased from 3,000,000 to 8,000,000 shares. Effective May 25, 2023, the number of shares of the Company’s common stock available for issuance under the 2016 Plan was increased from 8,000,000 to 13,000,000 shares and awards of restricted stock units are authorized for issuance. As of September 30, 2023, options to purchase 6,022,307 shares of common stock have been issued and are outstanding, 129,174 restricted shares of common stock have been awarded under the 2016 Plan. As of September 30, 2023, 5,497,284 shares of common stock remain available for grants under the 2016 Plan. Both plans are administered by the Company’s Board of Directors or its compensation committee which determines the persons to whom awards will be granted, the number of awards to be granted, and the specific terms of each grant. Subject to the provisions regarding Ten Percent Shareholders, (as defined in the 2016 Plan), the exercise price per share of each option cannot be less than 100% of the fair market value of a share of common stock on the date of grant. Options granted under the 2016 Plan are generally exercisable for a period of 10 years from the date of grant and may vest on the grant date, another specified date or over a period of time. The Company uses the Black-Scholes option pricing model to calculate the grant-date fair value of an award, with the following assumptions for 2023: no dividend yield in all years, expected volatility, based on the Company’s historical volatility, 73.7 % to 77.2 %, risk-free interest rate between 3.37 % to 4.27 % and expected option life of 10 years. Prior to May 2018, the expected life is based on the estimated average of the life of options using the “simplified” method, as prescribed in FASB ASC 718, due to insufficient historical exercise activity during recent years. Starting in May 2018, the expected life is based on the legal contractual life of options. As of September 30, 2023, there was $ 3,866,879 of unrecognized compensation expense related to non-vested market-based share awards that is expected to be recognized through September 2026. 17 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 11 – STOCK BASED COMPENSATION (CONTINUED) Share-based compensation was recognized as follows: Schedule of stock-based compensation plans For the Nine For the Nine Months Ending Months Ending September 30, 2023 September 30, 2022 2007 Employee Stock Option Plan $ — $ — 2016 Equity Incentive Plan 5,085,114 4,288,172 2016 Equity Incentive Plan restricted stock awards 198,253 67,467 Warrants — — Total share-based compensation $ 5,283,367 $ 4,355,639 The following tables summarize all stock option and warrant activity of the Company during the nine months ended September 30, 2023: Schedule of non-qualified stock options and warrants outstanding and exercisable Number of Exercise Weighted Average Shares Price Exercise Price Outstanding, December 31, 2022 8,073,173 $ 0.51 - $ 16.81 $ 1.91 Granted 1,751,667 $ 4.28 - $ 7.67 $ 5.29 Forfeited ( 37,125 ) $ 6.25 - $ 8.93 $ 7.13 Exercised ( 673,408 ) $ 0.67 - $ 5.22 $ 0.94 Outstanding, September 30, 2023 9,114,307 $ 0.51 - $ 16.81 $ 2.61 Exercisable, September 30, 2023 8,113,938 $ 0.51 - $ 16.81 $ 2.24 The aggregate intrinsic value of options and warrants outstanding and exercisable as of September 30, 2023 was $ 23,062,130 . The aggregate intrinsic value is calculated as the difference between the exercise price of the underlying options and warrants and the closing stock price of $ 4.47 for the Company’s common stock on September 30, 2023. During the nine month period ending September 30, 2023, 504,408 options were exercised for proceeds of $ 467,324 . During the nine month period ending September 30, 2023, 169,000 warrants were exercised for proceeds of $ 164,750 . Schedule of non-qualified stock options and warrants outstanding, by exercise price range Non-Qualified Stock Options and Warrants Outstanding Range of Exercise Prices Number Outstanding Currently Exercisable at September 30, 2023 Weighted Average Remaining Contractual Life Weighted Average Exercise Price of Options and Warrants Currently Exercisable $ 0.51 - $ 16.81 8,113,938 5.28 Years $ 2.24 18 LIGHTWAVE LOGIC, INC. NOTES TO FINANCIAL STATEMENTS SEPTEMBER 30, 2023 AND 2022 NOTE 11 – STOCK BASED COMPENSATION (CONTINUED) The fair value of restricted stock awards is estimated by the market price of the Company’s common stock at the date of grant. Restricted stock activity during the nine month period ending September 30, 2023 is as follows: Schedule of nonvested restricted stock units activity Restricted Stock Awards Nine month period ended September 30, 2023 Weighted Average Number of Fair Value Shares per Share Non-vested, beginning of period 13,816 $ 9.65 Granted 105,854 5.31 Vested ( 25,367 ) 5.24 Cancelled and forfeited — — Non-vested, end of period 94,303 $ 5.96 Restricted stock awards are being amortized to expense over the vesting period. As of September 30, 2023 and 2022, the unamortized value of the restricted stock awards was $ 496,736 and $ 0 , respectively. NOTE 12 – RELATED PARTY At September 30, 2023 the Company had a legal accrual to related party of $ 99,500 , travel and office expense accrual of officers in the amount of $ 10,550 , accounting service fee accrual and expense reimbursements to related parties of $ 7,962 offset by prepaid director operations committee fees in the amount of $ 26,400 . At December 31, 2022 the Company had a legal accrual to a related party of $ 60,577 , fees and consulting expense accruals of advisory board members in the amount of $ 18,000 , fees to directors in the amount of $ 13,500 , travel and office expense accruals of officers in the amount of $ 4,859 and accounting service fee accrual and expense reimbursement to related parties of $ 3,233 . NOTE 13 – RETIREMENT PLAN The Company established a 401(k) retirement plan covering all eligible employees beginning November 15, 2013. For the nine months ending September 30, 2023 and 2022, a contribution of $ 51,413 and $ 40,585 was charged to expense for all eligible non-executive participants. For the three months ending September 30, 2023 and 2022, a contribution of $ 18,554 and $ 13,498 was charged to expense for all eligible non-executive participants. NOTE 14 – SUBSEQUENT EVENTS During October 2023, the licensee requisitioned material under the material supply and license agreement that incorporates the Company’s patented electro-optic polymer materials for use in manufacturing photonic devices. 19 Item 2 Management's Discussion and Analysis of Financial Condition and Results of Operations The following discussion and analysis should be read in conjunction with our financial statements, included herewith. This discussion should not be construed to imply that the results discussed herein will necessarily continue into the future, or that any conclusion reached herein will necessarily be indicative of actual operating results in the future. Such discussion represents only the best present assessment of our management. This information should also be read in conjunction with our audited historical financial statements which are included in our Annual Report on Form 10-K for the fiscal year ended December 31, 2022, filed with the Securities and Exchange Commission on March 1, 2023. Overview Lightwave Logic, Inc. is a technology company focused on the development of next generation electro-optic photonic devices made on its P 2 IC™ technology platform which we have detailed as: 1) Polymer Stack™, 2) Polymer Plus™, and 3) Polymer Slot™. Our unique polymer technology platform uses in-house proprietary high-activity and high-stability organic polymers. Electro-optical devices called modulators convert data from electric signals into optical signals for multiple applications. Our differentiation at the modulator device level is in higher speed, lower power consumption, simplicity of manufacturing, small footprint (size), and reliability. We have demonstrated higher speed and lower power consumption in packaged devices, and during 2022 and 2023, we continued to make advances in techniques to translate material properties to efficient, reliable modulator devices with commercial foundries. We are currently focused on testing and demonstrating the simplicity of manufacturability and reliability of our devices, including in conjunction with the silicon photonics manufacturing ecosystem. In 2022 we discussed the addition of several silicon-based foundry partners to help scale in volume our polymer modulator devices and we started to receive working modulator chips from the foundries. We have advanced our interactions with our foundries and we continue to receive working modulator chips for prototyping. Silicon-based foundries are large semiconductor fabrication plants developed for the electronics IC business, that are now engaging with silicon photonics to increase their wafer throughput. Partnering with silicon-based foundries not only demonstrates that our polymer technology can be transferred into standard production lines using standard equipment, it also allows us to efficiently utilize our capital. The foundry partnerships will allow us to scale our high-performance polymer optical engines quickly and efficiently. Our extremely strong and broad patent portfolio allows us to optimize our business model in three areas: 1) Traditional focus on product development, 2) Patent licensing and 3) Technology transfer to foundries. We are continually looking to strengthen our patent portfolio both by internal inventions and acquisition of intellectual property. We are initially targeting applications in fiber optic data communications and telecommunications markets and are exploring other applications that include automotive/LIDAR, sensing, displays etc., for our polymer technology platform. Our goal is to have our unique polymer technology platform become ubiquitous. Artificial Intelligence (AI) has been integrating deeper within our daily activities with applications to make us more efficient and possibly smarter. The impact on the internet is huge, and the internet is based on an optical network that utilizes data centers to route and switch traffic or information to and from destinations. Data centers are being upgraded today in a fashion that the industry has not seen before. The expected demands of increased traffic, information, and data driven by AI is changing the way the internet is being operated. AI is now creating new and interesting market opportunities to upgrade the internet. Three of these are important today: density, speed, and low power and these are very well aligned with our high performance electro-optic polymers. We are designing high performance polymer modulator optical engines to support the rise and growth of AI as it generates more information that will travel through the internet and optical network. Commencement of Commercial Operations We commenced commercial operations in May 2023. Presently, our commercial operations consist of a material supply license agreement to provide Perkinamine ® chromophore materials for polymer based photonic devices and photonic integrated circuits (PICs). The license agreement represents tangible commercial progress for electro-optic polymers as part of our Company's business plan. Our Company is also in various stages of photonic device and materials development and evaluation with potential customers and strategic partners. We expect to obtain additional revenue from material supply and licensing agreements, technology transfer agreements and the production and direct sale of our own photonic devices. Materials Development Our Company designs and synthesizes organic chromophores for use in its own proprietary electro-optic polymer systems and photonic device designs. A polymer system is not solely a material, but also encompasses various technical enhancements necessary for its implementation. These include host polymers, poling methodologies, and molecular spacer systems that are customized to achieve specific optical properties. Our organic electro-optic polymer systems compounds are mixed into solution form that allows for thin film application. Our proprietary electro-optic polymers are designed at the molecular level for potentially superior performance, stability, and cost-efficiency. We believe our proprietary and unique polymers have the potential to replace more expensive, higher power consuming, slower-performance materials such as semiconductor modulator devices that are used in fiber-optic communication networks today. Our patented and patent pending molecular architectures are based on a well-understood chemical and quantum mechanical occurrence known as aromaticity . Aromaticity provides a high degree of molecular stability that enables our core molecular structures to maintain stability under a broad range of operating conditions. We expect our patented and patent-pending optical materials along with trade secrets and licensed materials, to be the core of and the enabling technology for future generations of optical devices, modules, sub-systems, and systems that we will develop or potentially out-license to electro-optic device manufacturers, contract manufacturers, original equipment manufacturers, etc. Our Company contemplates future applications that may address the needs of semiconductor companies, optical network companies, Web 2.0/3.0 media companies, high performance computing companies, telecommunications companies, aerospace companies, automotive companies, as well as for example, government agencies. 20 Device Design and Development Electro-optic Modulators Our Company designs its own proprietary electro-optical modulation devices. Electro-optical modulators convert data from electric signals into optical signals that can then be transmitted over high-speed fiber-optic cables. Our modulators are electro-optic, meaning they work because the optical properties of the polymers are affected by electric fields applied by means of electrodes. Modulators are key components that are used in fiber optic telecommunications, data communications, and data centers networks etc., to convey the high data flows that have been driven by applications such as pictures, video streaming, movies etc., that are being transmitted through the Internet. Electro-optical modulators are expected to continue to be an essential element as the appetite and hunger for data increases every year as well as the drive towards lower power consumption, and smaller footprint (size). Polymer Photonic Integrated Circuits Our Company also designs its own proprietary Photonic Integrated Circuits (otherwise termed a polymer PIC). A polymer PIC is a photonic device that integrates several photonic functions on a single chip. We believe that our technology can enable the ultra-miniaturization footprint needed to increase the number of photonic functions residing on a semiconductor chip to create a progression like what was seen in the computer integrated circuits, commonly referred to as Moore’s Law. One type of integration is to combine several instances of the same photonic functions such as a plurality of modulators to create a multi-channel polymer PIC. The number of channels can be varied depending on application. For example, the number of photonic components could increase by a factor of 4, 8, or 16. Another type of integration is to combine different types of devices including from different technology bases such as the combination of a semiconductor laser with a polymer modulator. Our P 2 IC™ platform encompasses both these types of architecture. Current semiconductor photonic technology today is struggling to reach faster device speeds. Our modulator devices, enabled by our electro-optic polymer material systems, work at extremely high frequencies (wide bandwidths) and possess inherent advantages over current crystalline electro-optic material contained in most modulator devices such as bulk lithium niobate (LiNbO3), indium phosphide (InP), silicon (Si), and gallium arsenide GaAs). Our advanced electro-optic polymer platform is creating a new class of modulators such as the Polymer Stack™, Polymer Plus™, Polymer Slot™, and associated PIC platforms that can address higher data rates in a lower cost, lower power consuming manner, smaller footprint (size) with much simpler data encoding techniques. Our electro-optic polymer material will boost the performance of standard PIC platforms such as silicon photonics and indium phosphide. Our electro-optic polymers can be integrated with other materials platforms because they can be applied as a thin film coating in a fabrication clean room such as may be found in semiconductor foundries using standard clean room tooling. These approaches enable our Polymer Plus™ and Polymer Slot™ device platforms. Our polymers are unique in that they are stable enough to seamlessly integrate into existing CMOS, Indium Phosphide (InP), Gallium Arsenide (GaAs), and other semiconductor manufacturing lines. Of relevance are the integrated silicon photonics platforms that combine optical and electronic functions. These include a miniaturized modulator for ultra-small footprint applications in which we term the Polymer Slot™. This design is based on a slot modulator fabricated into semiconductor wafers that can include either silicon or indium phosphide. Our Company has a fabrication facility in Colorado to apply standard fabrication processes to our electro-optic polymers which create modulator devices. While our internal fabrication facility is capable of manufacturing modulator devices, we have partnered with commercial silicon-based fabrication companies that are called foundries who can scale our technology with volume quickly and efficiently. The process recipe for fabrication plants or foundries is called a ‘process development kit’ or PDK. We are currently working with commercial foundries to implement our electro-optic polymers into accepted PDKs by the foundries. One of the metrics for successful implementation of PDK is to receive working modulator chips. Our work with the foundries is being focused with the Polymer Plus™ and the Polymer Slot™ polymer modulators. Business Strategy Our business strategy anticipates that our revenue stream will be derived from one or some combination of the following: (i) technology licensing for specific product application; (ii) joint venture relationships with significant industry leaders; and (iii) the production and direct sale of our own electro-optic device components. Our objective is to be a leading provider of proprietary technology and know-how in the electro-optic device market. In order to meet this objective, we intend to continue to: · Further the development of proprietary organic electro-optic polymer material systems   · Develop photonic devices based on our P 2 IC™ technology   · Develop proprietary intellectual property   · Grow our commercial device development capabilities  · Partner with silicon-based foundries who can scale volume quickly  21 · Grow our product reliability and quality assurance capabilities   · Grow our optoelectronic packaging and testing capabilities   · Grow our commercial material manufacturing capabilities   · Maintain/develop strategic relationships with major telecommunications and data communications companies to further the awareness and commercialization of our technology platform   · Add high-level personnel with industrial and manufacturing experience in key areas of our materials and device development programs.   We commenced commercial operations in May 2023 with our entry into a material supply license agreement to provide Perkinamine ® chromophore materials for polymer based photonic devices and photonic integrated circuits (PICs). Create Organic Polymer-Enabled Electro-Optic Modulators We intend to utilize our proprietary optical polymer technology to create an initial portfolio of commercial electro-optic polymer product devices with applications for various markets, including telecommunications, data communications and data centers. These product devices will be part of our proprietary photonics integrated circuit (PIC) technology platform . We expect our initial modulator products will operate at symbol rates at least 112 Gigabaud which is roughly 200Gbps when utilized with PAM4 encoding schemes. Our devices are highly linear and can also enable the performance required to take advantage of more advance complex encoding schemes if required. Our Proprietary Products in Development As part of a tactical marketing strategy, our Company is developing several optical devices using our proprietary electro-optical polymer material, which are in various stages of development. These include: Ridge Waveguide Modulator, Polymer Stack ™ Our ridge electro-optic waveguide modulator was designed and fabricated in our in-house laboratory. The fabrication of our first in-house device is significant to our entire device program and is an important starting point for modulators that are being developed for target markets. We have multiple generations of new materials that we will soon be optimizing for this specific design. In September 2017 we announced that our initial alpha prototype ridge waveguide modulator, enabled by our P 2 IC™ polymer system, demonstrated bandwidth performance levels that will enable 112 Gbaud modulation in fiber-optic communications. This device demonstrated true amplitude (intensity) modulation in a Mach-Zehnder modulator structure incorporating our polymer waveguides. This important achievement will allow users to utilize arrays of 4 x 112 Gbaud symbol rate (4x 200 Gbps data rate) polymer modulators using PAM-4 encoding to enable 800 Gbps data rate systems. These ridge waveguide modulators are currently being packaged with our partner into prototype packages . These prototype packages will enable potential customers to evaluate the performance at 112 Gbaud. Once a potential customer generates technical feedback on our prototype, we expect to be asked to optimize the performance to their specifications. Assuming this is successful, we expect to enter a qualification phase where our prototypes will be evaluated more fully . In parallel, we are developing modulators for scalability to higher symbol rates above 112 Gbaud. In September 2018, we showed in conference presentations the potential of our polymer modulator platform to operate at over 100 GHz bandwidth. This preliminary result corresponds to 100 Gbps data rates using a simple NRZ data encoding scheme or 200 Gbps with PAM-4 encoding. With 4 channel arrays in our P 2 IC™ platform, the Company thus has the potential to address both 400 Gbps and 800 Gbps markets. While customers may start the engagement at 112 Gbaud, we believe potential customers recognize that scalability to higher speeds is an important differentiator of the polymer technology . We believe the ridge waveguide modulator Polymer Stack™ represents our first commercially viable device and targets the fiber optics communications market. We have completed internal market analysis and are initially targeting interconnect reach distances of less than 1km. In these markets, the system network companies are looking to implement modulator-based transceivers that can handle aggregated data rates 800 Gbps and above. The market opportunity for less than 10km is worth over $2B over the next decade. Polymer Plus™ Using our novel waveguide design, we are developing a more compact modulator to be implemented directly with existing integrated photonics platforms such as silicon photonics and Indium Phosphide. As our electro-optic polymers are applied in liquid form, they can be deposited as a thin film coating in a fabrication clean room such as may be found in semiconductor foundries. This approach we call Polymer Plus™. The advantage of this approach is that it allows existing semiconductor integrated photonics platforms such as silicon photonics and indium phosphide to be upgraded with higher speed modulation functionality with the use of polymers in a straight-forward and simple approach. Further, our polymers are unique in that they are stable enough to seamlessly integrate into existing CMOS, Indium Phosphide (InP), Gallium Arsenide (GaAs), and other semiconductor manufacturing lines. 22 A large majority of commercial silicon photonics platforms utilize large silicon photonics foundries such as those that manufacture IC products for a number of applications such as communications, computing, consumer, etc. In order to seamlessly integrate our polymer materials to upgrade for example, silicon photonics designs, partnering with a silicon foundry is necessary . Polymer Slot™ As part of supporting further improvement and scalability of our platform, we continue to develop more advanced device structures that include the Polymer Slot™. Our high performance, low power, extremely small footprint polymer photonics slot waveguide modulator utilizes a slot design that is part of PIC platform such as silicon photonics with one of our proprietary electro-optic polymer material systems as the enabling material layer. Initial performance results in 2022 from commercial foundries achieved key design specifications for the slot modulator. Preliminary testing and initial data on our polymer photonics slot waveguide modulators fabricated at commercial foundries demonstrated extremely high performance suitable for the hyperscaler and fiber optics markets. The tested polymer photonic slot chip had less than 1-millimeter square footprint, enabling the possibility of sophisticated PIC architecture designs on a single silicon substrate. In addition, the waveguide structure was a fraction of the length of a typical inorganic-based silicon photonics modulator waveguide and is suitable to be used as an engine for state-of-the-art pluggable transceiver modules such as the OSFP and the QSFP-DD. With the combination of our proprietary electro-optic polymer material and the extremely high optical field concentration in the slot waveguide, the test modulators demonstrated very low operating voltage. Initial speeds exceeded 70GHz in the telecom, 1550 nanometer frequency band, and there were devices that exceeded over 100GHz 3dB bandwidth. We are also continuing our collaborative development of our polymer photonic slot waveguide modulators (Polymer Slot™) with a partner that has advanced device design capabilities using Plasmonic technologies. Some of these devices demonstrated performance levels that exceeded 250GHz in 2022. Our Long-Term Device Development Goal - Multichannel Polymer Photonic Integrated Circuit (P 2 IC™) Our P 2 IC™ platform is positioned to address markets with aggregated data rates of 100 Gbps, 400 Gbps, 800 Gbps and beyond. Our P 2 IC™ platform will contain several photonic devices that may include, over and above polymer-based modulators, photonic devices such as lasers, multiplexers, demultiplexers, detectors, fiber couplers. While our polymer-based ridge waveguide and slot modulators are currently under development to be commercially viable products, our long-term device development goal is to produce a platform for the 400 Gbps, 800 Gbps, 1600Gbps and beyond fiber optic transceiver market. This has been stated in our photonics product roadmap that is publicly available on our website. The roadmap shows a progression in speed from 50 Gbaud based modulators to 100 Gbaud based modulators. The roadmap shows a progression in integration in which the modulators are arrayed to create a flexible, multichannel P 2 IC™ platform that spans 100 Gbps, 400 Gbps, 800 Gbps, 1.6Tbps (or 1600Gbps), and a scaling philosophy that will grow to 3.2Tbps line rates. We showed bandwidths of polymer-based modulator devices at a major international conference (ECOC – European Conference on Optical Communications 2018) with bandwidths that exceeded 100GHz. We noted that to achieve 100Gbaud, the polymer-based modulator only needs to achieve 80GHz bandwidth. During ECOC 2019, we showed environmental stability. We continue to develop our polymer materials and device designs to optimize additional metrics. We are now optimizing the device parameters for very low voltage operation . At the ECOC 2022 conference we demonstrated two different world record performances using polymer slot based modulators. Our Target Markets Cloud computing and data centers Big data is a general term used to describe the voluminous amount of unstructured and semi-structured data a Company creates – data that would take too much time and cost too much money to load into a relational database for analysis. Companies are looking to cloud computing in their data centers to access all the data. Inherent speed and bandwidth limits of traditional solutions and the potential of organic polymer devices offer an opportunity to increase the bandwidth, reduce costs, improve speed of access, and to reduce power consumption both at the device as well as the system level. Datacenters have grown to enormous sizes with hundreds of thousands and even millions of servers in a single datacenter. The number of so-called “hyperscale” datacenters are expected to continue to increase in number. Due to their size, a single “datacenter” may consist of multiple large warehouse-size buildings on a campus or even several locations distributed around a metropolitan area. Data centers are confronted with the problem of moving vast amounts of data not only around a single data center building, but also between buildings in distributed data center architecture. Links within a single datacenter building may be shorter than 500 meters, though some will require optics capable of 2 km. Between datacenter buildings, there is an increasing need for high performance interconnects over 10km in reach. 23 Our modulators are suitable for single-mode fiber optic links. We believe that our single mode modulator solutions will be competitive at 500m to 10km link distance lengths, with inherent advantages for 800Gbps applications. Telecommunications/Data Communications The telecommunications industry has evolved from transporting traditional analogue voice data over copper wire into the movement of digital voice and data. Telecommunication companies are faced with the enormous increasing challenges to keep up with the resulting tremendous explosion in demand for bandwidth. The metropolitan network is especially under stress now and into the near future. Telecommunications companies provide services to some data center customers for the inter-data center connections discussed above. 5G mobile upgrade, autonomous driving and IoT are expected to increase the need for data stored and processed close to the end user in edge data centers. This application similarly requires optics capable of very high speeds and greater than 10 km reach . Industry issues of scaling The key issues facing the fiber-optic communications industry are the economic progress and scalability of any PIC based technological platform. Our polymer platform is unique in that it is truly scalable and is expected to become a high performance engine for transceiver modules. Scalable means being able to scale up for high-speed data rates, while simultaneously being able to scale down in cost, and lower power consumption. This allows a competitive cost per data rate or cost per Gbps metric to be achieved . Fiber optic datacenter and high-performance computing customers want to achieve the metric of $1/Gbps @ 800Gbps (this essentially means a single mode fiber optic link that has a total cost of $800 and operates with a data rate of 800Gbps). Equally importantly, the datacenter industry would like to reduce the power consumption of optical ports for 400Gbps, 800Gbps, etc., significantly. As industry tries to match this target, it needs scalable PIC platforms to achieve this goal, of which our polymer platform is uniquely suited. An article by Dr, Michael Lebby that was recently published in broadband communities (BBC) magazine in early February 2023 discusses the virtues of polymer based technologies as part of an industry technology roadmap. The article is entitled “The internet is the brick wall Nostradamus did not see coming.” In this article cost/performance metrics are discussed that show the trend to higher and higher data rates using PIC platforms that include very high speed, low power modulator devices. The article also shows that electro-optic polymers play an important role in PICs over the next decade as they can reduce or close the gap between customer expectations and technical performance through effective scaling increase of high performance with low cost for short distance transceiver optical links. Some of the things needed to achieve the scaling performance of polymers in integrated photonics platforms is within sight today: 1. Increased r33 (which leads to very low Vpi in modulator devices) and we are currently optimizing our polymers for this. With Vpi levels of 1V or less will enable direct from associated electronics and potentially save network architects the cost of individual driver ICs. 2. Increase temperature stability so that the polymers can operate at broader temperature ranges effective, where we have made significant progress over the past few years . 3. Low optical loss in waveguides and active/passive devices for improved optical budget metrics which is currently an ongoing development program at our Company. 4. Higher levels of hermeticity for lower cost packaging of optical sub-assemblies within a transceiver module, where our advanced designs are being implemented into polymer-based packages that utilize atomic layer deposition (ALD) that is being developed in-house. Scalability in terms of cost reduction and high volume manufacturing can be enhanced by: 1. Leverage of commercial silicon photonics manufacturing capacity through the use of silicon-based foundries. Our Polymer Plus™ platform seeks to be additive to standard silicon photonics circuits . 2. Reduction of optical packaging costs by integration at the chip level of multiple modulators and also with other optical devices. Our P 2 IC™ platform seeks to address device integration . 24 Recent Significant Events and Milestones Achieved During February and March 2018, we moved our Newark, Delaware synthetic laboratory and our Longmont, Colorado optical testing laboratory and corporate headquarters to office, laboratory and research and development space located at 369 Inverness Parkway, Suite 350, Englewood, Colorado. The Englewood facility includes fully functional 1,000 square feet of class 1,000 cleanroom, 500 square feet of class 10,000 cleanroom, chemistry laboratories, and analytic laboratories. In August 2018 we completed (ahead of schedule) our fully equipped on-site fabrication facility to expand our high-speed test and design capabilities. In August 2023, we completed new laboratory production facilities, expanding the Englewood facility by over 65%, nearly 10,000 square feet, for a total of approximately 23,500 square feet to support new commercial activity, including enabling commercial device testing and evaluation, production reliability testing, laser characterization, SEM analysis and the expansion of our Company's chemical synthesis production line. Our Englewood facility streamlines all of our Company’s research and development and production workflow for greater operational efficiencies During March 2018, our Company, together with our packaging partner, successfully demonstrated packaged polymer modulators designed for 50Gbaud, which we believe will allow us to scale our P 2 IC™ platform with our Mach-Zehnder ridge waveguide modulator design as well as other photonics devices competitively in the 100Gbps and 400Gbps datacom and telecommunications applications market. We are currently fine-tuning the performance parameters of these prototypes in preparation for customer evaluations. During June 2018, our Company Acquired the Polymer Technology Intellectual Property Assets of BrPhotonics Productos Optoelectrónicos S.A., a Brazilian corporation, which significantly advanced our patent portfolio of electro-optic polymer technology with 15 polymer chemistry materials, devices, packaging and subsystems patent and further strengthened our design capabilities to solidify our market position as we prepare to enter the 400Gbps integrated photonics marketplace with a highly competitive, scalable alternative to installed legacy systems. Also, during June 2018, our Company promoted polymer PICs and Solidified Polymer PICs as Part of the Photonics Roadmap at the World Technology Mapping Forum in Enschede, Netherlands, which includes our Company’s technology of polymers and polymer PICs that have the potential to drive not only 400Gbps aggregate data rate solutions, but also 800Gbps and beyond. In August 2018 we announced the completion (ahead of schedule) of our fully equipped on-site fabrication facility, where we are expanding our high-speed test and design capabilities. We also announced the continuation of the building of our internal expertise with the hiring of world-class technical personnel with 100Gbps experience. In August 2023, we announced the completion of new laboratory production facilities, expanding our corporate headquarters by over 65%, nearly 10,000 square feet, for a total of approximately 23,500 square feet to support new commercial activity, including enabling commercial device testing and evaluation, production reliability testing, laser characterization, SEM analysis and the expansion of our Company's chemical synthesis production line. In February 2019 we announced a major breakthrough in our development of clean technology polymer materials that target the insatiable demand for fast and efficient data communications in the multi-billion-dollar telecom and data markets supporting Internet, 5G and IoT (Internet of Things) webscale services. The improved thermally stable polymer has more than double the electro-optic response of our previous materials, enabling optical device performance of well over 100 GHz with extremely low power requirements. This addition to the family of Perkinamine TM polymers will hold back run-away consumption of resources and energy needed to support ever-growing data consumption demands. We continue to conduct testing of the material and assessment of associated manufacturing processes and device structures prior to release to full development. In March 2019 we created an Advisory Board comprised of three world-class leaders in the photonics industry: Dr. Craig Ciesla, Dr. Christoph S. Harder, and Mr. Andreas Umbach. In January 2022 Dr. Ciesla was named to our Board of Directors, and our Advisory Board is currently comprised of Dr. Franky So, Dr. Christoph S. Harder, Mr. Andreas Umbach and Dr. Joseph A. Miller, who is a former member of our Board of directors. The Advisory Board is working closely with our Company leadership to enhance our Company’s product positioning and promote our polymer modulator made on our proprietary Faster by Design ™ polymer P 2 IC™ platform. The mission of the Advisory Board is initially to increase our Company’s outreach into the datacenter interconnect market and later to support expansion into other billion-dollar markets. The Advisory Board members have each been chosen for their combination of deep technical expertise, breadth of experience and industry relationships in the fields of fiber optics communications, polymer and semiconductor materials. Each of the Advisory Board members has experience at both innovators like Lightwave Logic and large industry leaders of the type most likely to adopt game-changing polymer-based products. In addition, they possess operational experience with semiconductor and polymer businesses. Also, in March 2019, our Company received the “Best Achievement in PIC Platform” award for our 100 GHz polymer platform from the PIC International Conference. The award recognizes innovative advances in the development and application of key materials systems driving today’s photonic integrated circuits (PICs) and providing a steppingstone to future devices. During the second quarter of 2019, our Company promoted its polymers at CoInnovate in May and the World Technology Mapping Forum in June. CoInnovate is a meeting of semiconductor industry experts. The World Technology Mapping Forum is a group authoring a photonics roadmap out to 2030. 25 In September 2019 at the prestigious European Conference on Communications (ECOC) in Dublin, Ireland, we showed measured material response over frequency and the resulting optical data bits stream on our clean technology polymer materials, the newest addition to our family of Perkinamine TM polymers, that meet and exceed of our near-term target speed of 80 GHz. We also released data demonstrating stability under elevated temperatures in the activated (poled to create data carrying capability) state. In October 2019, we reported that energy-saving polymer technology is highlighted in the recently published Integrated Photonics Systems Roadmap - International (IPSR-I). The roadmap validates the need for low-voltage, high-speed technologies such as ours. In May 2020, we announced that our latest electro-optic polymer material has exceeded target performance metrics at 1310 nanometers (nm), a wavelength commonly used in high-volume datacenter fiber optics. This material demonstrates an attractive combination at 1310 nm of high electro-optic coefficient, low optical loss and good thermal stability at 85 0 Celsius. The material is expected to enable modulators with 80 GHz bandwidth and low drive power, and has an electro-optic coefficient of 200 pm/V, an industry measure of how responsive a material is to an applied electrical signal. This metric, otherwise known as r33, is very important in lowering power consumption when the material is used in modulator devices. This technology is applicable to shorter reach datacenter operators, for whom decreasing power consumption is imperative to the bottom line of a facility. We considered this a truly historic moment—not only in our Company’s history, but in our industry–as we have demonstrated a polymer material that provides the basis for a world-class solution at the 1310 nm wavelength, something which other companies have spent decades attempting to achieve. In July 2020, we announced the official launch of our new corporate website www.lightwavelogic.com, reflecting ongoing efforts to provide up-to-date information for investors and potential strategic partners. The revamped website offers a clean, modern design integrated with helpful tools and investor relations resources, including a new corporate explainer video, to illustrate the target markets and advantages of Lightwave Logic’s proprietary electro-optic polymers. In August 2020, we announced the addition of Dr. Franky So, a leading authority in the OLED industry, to our Advisory Board. Dr. So is the Walter and Ida Freeman Distinguished Professor in the Department of Materials Science and Engineering at North Carolina State University. Previously, he was the Head of Materials and Device research for OLEDs at OSRAM Opto Semiconductors, as well as Motorola’s corporate research lab in the 1990s. Dr. So was an early researcher in electro-optic (EO) polymer modulators at Hoechst Celanese. As a member of the Company’s advisory board, Dr. So will work closely with management to enhance Lightwave’s product positioning for, as well as the promotion of, its polymer modulators made on its proprietary platform. In addition, he will provide technical support and advisory services to the Lightwave materials and device teams. On October 7, 2020 we announced the receipt of U.S. Patent number 10,754,093 that improves both the performance and reliability of our high-speed, low-power electro-optic polymer modulators intended for datacenter and telecommunications applications. The patent allows multi-layered electro-optic polymer modulators to perform more efficiently through the design of custom interfaces. These interfaces are designed into the cladding layers that allow optical transmission, electrical conductivity, material integrity, as well as a prevention of solvents affecting adjacent polymer materials. The net impact of all of this allows for our Company’s modulators to improve performance across the board, enabling higher reliability in the fiber optic communications environment . On October 15, 2020, we announced that our proprietary polymer technologies are compatible with currently available integrated photonics platforms. Our proprietary electro-optic materials are currently in the prototyping phase and are fabricated onto standard silicon wafers, and this Polymer Plus™ advancement, driven by the feedback our Company received from potential customers to-date, has allowed our materials to be suitable for additive integration to integrated photonics platforms such as silicon photonics, as well as indium phosphide and other standard platforms – therefore enabling simpler integration by customers. We believe this breakthrough allows a polymer modulator to enhance the performance of existing integrated photonics solutions in the marketplace, enabling higher speed and lower power consumption on foundry-fabricated photonics designs. Since our technology is additive to existing platforms such as silicon photonics, our electro-optic polymers are not actually competing with integrated photonic platforms, but rather enabling them to be more competitive in the marketplace, and it further validates our EO polymer platform as ideally suited to enable optical networking more efficiently than ever. On October 21, 2020, we announced that we have optimized a robust, photo-stable organic polymer material for use in our next-generation modulators intended to be trialed with potential customers under NDA. Our materials show high tolerance to high-intensity infrared light, common in a fiber optic communications environment and increasingly important as higher density of devices access the network, directly resulting in higher intensity infrared light levels. Our preliminary results suggest that our recently developed electro-optic polymer material, designed based on potential customer input, displays unrivaled light tolerance (also known as photostability) compared to any organic commercial solution in use today. Our results meet both our current internal criteria and address potential customer feedback. On November 2, 2020, we disclosed results on our polymer material stability testing including further results for electro-optic efficiency for our Company’s materials that operate both at 1550nm as well as 1310nm. We demonstrated test materials results for electro-optic efficiency to 4000hrs, improvement in sensitivity to oxygen as part of a broadband exposure test, and stability for polymers exposed to 1310nm light at 100mW. On November 20, 2020 we announced the receipt of U.S. Patent number 10,591,755 that details an important invention that allows users of electro-optic polymer modulators to not only operate the devices with high speed and low power directly from CMOS IC chips, but gives them the opportunity to avoid the expense, physical footprint and power consumption of high-speed modulator driver ICs. Furthermore, this patent strengthens our freedom of manufacturing, and directly enables our modulators to become more competitive in the marketplace. 26 On December 16, 2020 we announced the development of a new sealant for our future Chip-on-Board (COB) packaged polymer platform. The sealant, which blocks oxygen and other atmospheric gases, is a key step in our Company’s development towards a polymer modulator without a package, an important enabling technology for the industry. We plan to develop the sealant for commercial implementation in our future modulators. Recent results suggest that our electro-optic polymer sealant material displays encouraging barrier properties and is expected to translate to significant improvement in bare chip robustness against atmospheric gases, as compared to existing EO polymer commercial solutions in use today. While the initial measurements are highly promising, our Company plans to continue development work to further optimize the sealant material and barrier performance towards the chip-on-board goal. On January 13, 2021, we announced the receipt of U.S. Patent number 10,886,694 that details an invention that allows electro-optic polymer modulators to be packaged in a hermetic environment using well-known, high-volume and low-cost fabrication processes that are available in a typical semiconductor fabrication foundry – improving suitability for mass production. Further, the design of this capsule package can improve both the reliability and the coupling interface between fiber optic cables and their laser sources for arrayed photonic integrated circuit solutions. The package can also interpose signals from an underlying circuit board to the polymer modulators, lasers, and other components for data transfer. The hermetic capsule is built from a semiconductor base that contains electrical and optical circuits and components. A hermetic capsule chamber is created by the design of a semiconductor lid that is sealed to the semiconductor base platform by a metallization process. Using standardized fabrication techniques we can now create a package that achieves the performance, reliability, cost, and volume requirements that has been a challenge for the photonics industry for years. On May 11, 2021, we announced the receipt of U.S. Patent number 10,989,871 that details an invention that allows for improved protective polymer layers in modulators when designed into advanced integrated photonic platforms, better positioning them for high-volume manufacturing processes. The protective layers will enhance electro-optic polymer devices' performance through higher reliability, better optical performance and enable the use of standardized manufacturing processes best suited for mass-production. On June 7, 2021, we announced that our company’s common stock was added to the Solactive EPIC Core Photonics EUR Index NTR as part of the index's semi-annual additions. The index includes global public companies with a common theme of optoelectronics, photonics, and optical technologies in general that range from components, modules, manufacturers, and optical network system companies. This inclusion broadens our exposure to the capital markets community, as well as credibility with potential partners and customers. On June 16, 2021, we announced test results from new modulators fabricated in 2021, which exceeded bandwidth design targets and achieved triple the data rate as compared to competing devices in use today. The breakthrough new devices demonstrated 3dB electro-optical with electrical bandwidths that exceed 100GHz – with measurements coming close to our Company’s state-of-the-art 110GHz test equipment capability. We expect this advancement to have a profound impact on the traffic flow on the internet. On June 24, 2021, we announced the receipt of U.S. patent number 11,042,051 that details a breakthrough new device design that enables mass-volume manufacturing when designed into advanced integrated photonic platforms. The device design enhances reliability, improves optical mode control and most important, lowers by consumption through the use of direct-drive, low-voltage operation. The patent is entitled, "Direct drive region-less polymer modulator methods of fabricating and materials therefor" and is expected to open the opportunity for low power consumption electro-optic polymers to be developed into large foundry PDKs (process development kits) and be ready for mass volume commercialization. The patent emphasizes our technology platform using fabrication techniques that would naturally fit into foundry PDKs. On August 4, 2021, we announced that we developed improved thermal design properties for electro-optic polymers used in our Polymer Plus™ and Polymer Slot™ modulators, enabling the speed, flexibility and stability needed for high-volume silicon foundry processes. We successfully created a 2x improvement in r33, while allowing higher stability during poling and post-poling. This provides better thermal performance and enables greater design flexibility in high-volume silicon foundry PDK (process development kit) processes. On August 9, 2021, we announced the receipt of U.S. patent number 11,067,748 entitled "Guide Transition Device and Method" that covers a new invention that enables enhanced optical routing architectures for polymer-based integrated photonics that can be scaled with partner foundries. This new invention will enable innovative, highly scalable optical routing architectures for integrated photonic platforms. The patent provides novel optical waveguide transition designs using two planes of optical waveguides that are expected to be critical for optical signal routing and optical switching, opening the opportunity for high speed, energy efficient electro-optic polymers to be implemented into foundry PDKs (process development kits) to improve the performance of integrated photonic circuits. This breakthrough technology opens the door for advanced integrated photonics architectural design. We believe the simplicity of the design is ideal for production in foundries and will best position our Company to enable increased data traffic on the internet while using less power. On September 1, 2021, our Company's common shares began trading on the Nasdaq Capital Market ("Nasdaq"). The Company’s Nasdaq listing will help to expand our potential shareholder base, improve liquidity, elevate our public profile within the industry and should ultimately enhance shareholder value. On September 15, 2021, we announced the receipt of the 2021 Industry Award for Optical Integration from the European Conference on Optical Communications (ECOC), a premier industry exhibition that was held in Bordeaux from September 13-15, 2021. ECOC created the fiber communication industry awards in six categories to put the spotlight on innovation happening within the industry. The awards recognize and highlight key industry achievements in advancing optical components, photonic integration, optical transport and data center innovation. The awards are selected from top industry players, representing significant innovation in photonics integration at our prestigious exhibition. 27 On September 16, 2021, we announced the achievement of world-record performance for a polymer modulator, as demonstrated in an optical transmission experiment by ETH Zurich, using our Company's proprietary, advanced Perkinamine™ chromophores and Polariton Technologies Ltd.'s newest plasmonic EO modulator, a silicon-photonics-based plasmonic racetrack modulator offering energy-efficient, low-loss, and high-speed modulation in a compact footprint. The groundbreaking results were presented as a post-deadline paper at the prestigious European Conference on Optical Communications (ECOC) industry exhibition and conference in Bordeaux on September 16, 2021. Polariton's plasmonic modulator transmitted 220 Gbit/s OOK and 408 Gbit/s 8PAM. Transmission of an optical signal was conducted over 100 m using a low-voltage electrical drive of 0.6Vp, an on-chip loss of 1 dB, and an optical 3 dB bandwidth of beyond 110 GHz. On January 3, 2022, we announced the publication of our patent application 20210405504A1 by the United States Patent and Trademark Office (USPTO) – entitled 'Nonlinear Optical Chromophores Having a Diamondoid Group Attached Thereto, Methods of Preparing the Same, and Uses Thereof' – which significantly improves the overall stability and performance of our electro-optic polymers. The Company's electro-optic chromophores are designed to have one or more diamondiod molecular groups attached to the chromophore. When such chromophores are dispersed in a host polymer matrix, the electro-optic materials result in improved macroscopic electro-optic properties, increased poling efficiency, increased loading as well as increased stability of these materials after poling. The impact of this technology is that it will accelerate the path for very high-speed, low-power electro-optic polymers to be implemented into large foundry process development kits (“ PDKs ”) to boost performance of integrated photonic circuits. On January 3, 2022, we announced that we e nhanced our Company’s Foundry Process Development Kit Offering with the addition of Optical Grating Couplers. This expanded design tool kit will enable silicon foundries to implement PDKs and fabricate modulators and optical gratings in a single fab run, further enhancing modulator efficacy. We are continuing to work on additional design tool kit components to enable an expedited commercialization process through a more simplified manufacturing process for our foundry partners. On January 3, 2022, we announced that we appointed respected industry leader Dr. Craig Ciesla to our Board of Directors and that retired director Dr. Joseph A. Miller transitioned to our Company's Advisory Board. Dr. Ciesla is currently the Vice President, Head of the Advanced Platforms and Devices Group at Illumina, a leading provider of DNA sequencing and array technologies. There he leads a team driving innovation in sequencing platforms, microfluidics, electronics, and nanofabrication. Prior to Illumina, he was Vice President of Engineering at Kaiam, where he was responsible for the development and production of 100G transceivers for the data-center market. He was also the founding CEO of Tactus Technology, an innovator in the user interface industry, where he was the co-inventor of Tactus' polymer morphing screen technology. Before Tactus he had a variety of roles at Intel, JDSU (now Lumentum), Bookham (now Oclaro) and Ignis Optics developing a wide range of products in the fiber-optics market. He started his career at Toshiba Research Europe, where he performed early terahertz images of skin cancer. Dr. Ciesla holds a BSc (Hons.) in Applied Physics and Ph.D. in Physics from Heriot-Watt University in Edinburgh. On February 10, 2022, we announced breakthrough photostability results on our electro-optic polymer modulators that are compatible with high-volume silicon foundry processes. The improved photostability of our polymers are expected to minimize any optical losses and provide a more robust platform for silicon foundries. This breakthrough photostability performance is incredibly important as we optimize our polymers for high-volume silicon foundry processes. On March 7, 2022, we announced the receipt of U.S. patent number 11,262,605 entitled, "Active region-less polymer modulator integrated on a common PIC platform and method." This invention will simplify modulator integration for high-volume foundry manufacturing operations while enhancing polymer reliability to enable a more effective photonic engine. The essence of the invention is a complete optical engine that fits into fiber optic transceivers (either pluggable or co-packaged) that are used in routers, servers and elsewhere in optical networks. The engine is designed for high-volume manufacturing operations using silicon foundry infrastructure. The patent illustrates the use of our polymer modulators as a high speed, low power engine not only for data communication and telecommunication applications, but other new market opportunities as well. On March 22, 2022 we announced the achievement of world-class results for a polymer modulator, as demonstrated in an enhanced stability and high-speed measurement by Polariton Technologies and ETH Zurich. The results were generated using the Company's proprietary, advanced Perkinamine™ chromophores in Polariton's silicon-photonics-based plasmonic racetrack modulator that offers energy-efficient, low-loss, and high-speed modulation in a compact footprint that is ideal for pluggable and/or co-packaging transceiver modules. The plasmonic modulator performance was compared to that of silicon photonic microring modulators. The plasmonic device, using Lightwave Logic's electro-optic polymer material, was shown to be 250-3000x more stable than the silicon devices relative to operating condition changes. In addition, the plasmonic modulator was tested for 70+ minutes at 100 Gbps NRZ at 80C with no decrease in performance. The world-class results were presented as a contributed peer-reviewed paper at the prestigious 2022 Optical Fiber Conference (OFC2022), the optical communication industry's leading international technical conference and trade show, in San Diego on March 10, 2022. On April 19, 2022, we announced the publication of our patent application 2022/0113566 A1 entitled "TFP (thin film polymer) optical transition device and method" that illustrates the design of a simpler to fabricate, lower cost hybrid integrated photonics chip using electro-optic polymers which are more advantageous for high-volume production. The invention will simplify polymer modulator fabrication when integrated with silicon photonics for high-volume foundry manufacturing applications. The simplified fabrication approach enables us to simplify the production of very high speed, low power proprietary polymer modulators that will enable significantly faster data rates in the internet environment. The essence of the invention is a hybrid polymer-silicon photonics engine that fits into fiber optic transceivers (either pluggable or co-packaged) that are used in the routers, servers and network equipment that are proliferating with the growth of data centers, cloud computing and optical communications capacity. The hybrid polymer-silicon photonics engine is designed to use high-volume silicon foundry infrastructure. 28 On May 25, 2022, we announced enhanced photostability results on our Company's proprietary electro-optic polymer modulators – demonstrating the reliability necessary for commercial deployments – all based on a technology which can be ported into high-volume silicon foundries and integrated onto a silicon photonics platform with other optical devices. Photostability is a critical performance metric required both in high volume manufacturing processes (such as photolithography) and in offering the high reliability and network availability required for commercial deployments. In the tests conducted, subjecting the Company's latest polymers to high intensity optical power for over 3000 hours produced no change in device performance. The ability of our proprietary polymers to pass this accelerated photostability aging test provides assurance that they will both tolerate the optical exposures which occur in high-volume manufacturing and support the reliability over the required operating life of optical transceivers and network elements. On June 21, 2022, we announced the publication of our patent application 2022/0187637A1 entitled "Hybrid electro-optic polymer modulator with silicon photonics" that details a novel fabrication process that allows our Company’s proprietary polymers to be fabricated by silicon foundries in a high-volume manufacturing environment. The published patent application also details a more efficient process that allows for high yielding, high stability poling of polymers in a high-volume foundry manufacturing environment. The development of the PDK for this new optical hybrid optical modulator design is now in progress with our Company’s foundry partners. June 23, 2022, we announced the publication of our patent application 2022/0187638A1 entitled " Hybrid electro-optic polymer modulator with atomic layer deposition (ALD) sealant layer" that allows our Company’s proprietary polymers to be sealed to moisture and other atmospheric gases in a very low temperature and quasi-hermetic environment through the use of a chip-scale packaging approach that can be applied in parallel at wafer level (i.e. in volume) and that eliminates the need for a separate hermetic enclosure or "gold box." Chip-scale packaging is a technique that has been gathering momentum in the silicon electronics industry for the past decade to reduce device chip packaging costs and increase device performance – enabling high-volume front and back-end manufacturing as well as extremely small sizes in miniaturization. Specifically, our electro-optic polymer modulators are sealed with a low-temperature conformal atomic layer deposition dielectic layers that are supported on a silicon substrate with passive silicon photonics waveguides. On June 27, 2022 our Company's common stock was added to the Russell 3000 ® Index. We expect that the awareness of being included in one of the most widely followed benchmarks will not only benefit our existing shareholders but will lead to a broader base of institutional investors. The annual Russell index reconstitution captures the 4,000 largest US stocks as of May 6, ranking them by total market capitalization. Our membership in the US all-cap Russell 3000® Index, which remains in place for one year, means automatic inclusion in the small-cap Russell 2000® Index as well as the appropriate growth and value style indexes. On June 30, 2022, we announced that our CEO, Dr. Michael Lebby, was again invited to co-chair the Photonic Integrated Circuits (PIC) International Conference that took place June 28-29, 2022 in Brussels, Belgium. At the conference, Dr. Lebby led an invited talk entitled, "Enabling lower power consumption optical networking using high speed, low power polymer modulators", focusing on the issue of reducing power consumption in datacenters and optical networks. He also contributed to a panel session, "Hybrid PICs technology challenges and solutions," on the need for hybrid integration addressing the volume production of 3D and 2.5 integrated electronic and photonic integrated circuits (PICs) based on the utilization of large silicon foundries. This included a discussion on the use of silicon photonics with hybrid technologies such as electro-optic polymers, polymer based plasmonics, silicon nitride and III-V laser sources. On September 22, 2022, we announced the achievement of world record performance for low-power consumption ultra-high-speed 'green' slot modulators in collaboration with Karlsruhe Institute of Technology (KIT) and its spin-off SilOriX as part of a peer-reviewed post-deadline paper presented at the prestigious 2022 European Conference on Optical Communications (ECOC) in Basel, Switzerland on September 22, 2022. The team presented the first sub-1mm Mach Zehnder-type modulators with sub-1V drive voltage that rely on Lightwave’s proprietary advanced Perkinamine™ chromophores. The devices rely on the slot-waveguide device concept developed at KIT and commercialized through SilOriX. Further, the material has experimentally proven thermal stability at 85°C and offers extreme energy-efficiency along with high-speed modulation in a compact footprint. Additionally, this shows that our material can perform in a variety of device structures and designs and is positioned to significantly reduce power consumption of optical networking and to become a true 'green photonics' enabler for the industry. On September 22, 2022, we announced the achievement of a world-record demonstration of a 250GHz super high bandwidth electro-optical-electrical (EOE) link through a collaboration with ETH Zurich. The link was demonstrated by ETH Zurich and uses Polariton's high-speed plasmonic modulators containing Lightwave's proprietary Perkinamine™ chromophores and ETH Zurich's high-speed graphene photodetectors. The link contained a plasmonic modulator using electro-optic polymer material as well as a novel metamaterial enhanced graphene photodetector featuring a 200 nm spectral window and a setup-limited 1 bandwidth of 500 GHz. The EOE link achieved a world record and unprecedented 250 GHz 3dB bandwidth 2 . This is an optical link that utilizes devices with extremely high bandwidths, and the plasmonic demonstration shows that hybrid technologies such as our electro-optic polymers and graphene together form an important technology platform for volume scalability using large silicon foundries for mass commercialization. T he groundbreaking results were presented by Stephan Koepfli as part of a peer-reviewed post-deadline paper presented at the prestigious 2022 European Conference on Optical Communications (ECOC) in Basel, Switzerland on September 22, 2022. 29 On November 15, 2022, we announced the receipt of U.S. patent number 11,435,603 B2 entitled "TFP (thin film polymer) optical transition device and method," which illustrates the design of a simpler to fabricate, lower cost hybrid integrated photonics chip using electro-optic polymers which are more advantageous for high-volume production. The simplified fabrication approach enables streamlined production of very high speed, low power proprietary polymer modulators that will enable significantly faster data rates in the internet environment. The essence of the invention is a hybrid polymer-silicon photonics engine that fits into fiber optic transceivers (either pluggable or co-packaged) that are used in the routers, servers and network equipment that are proliferating with the growth of data centers, cloud computing and optical communications capacity. On November 17, 2022, we announced the receipt of U.S. patent number 11,435,604 B2 entitled "Hybrid electro-optic polymer modulator with silicon photonics," which allows Lightwave Logic's proprietary polymers to be fabricated by silicon foundries in a high-volume manufacturing environment. The patent also details a more efficient process that allows for high yielding, high stability poling of polymers in a high-volume foundry manufacturing environment. From a commercial standpoint, this patent enables our polymers to be mass-produced using existing silicon foundry equipment, simplifying production for the foundry's we are working with. On November 29 , 2022, we announced our acquisition of the polymer technology and intellectual property assets of Chromosol Ltd (UK). The acquisition significantly strengthened our Company's design capabilities with foundry PDKs with extremely low temperature atomic layer deposition (ALD) processes that effectively hermetically seal polymer devices that have been prepared for high volume manufacturing. The advanced fabrication processes of ALD with temperatures below 100C will solidify our Company's market position with both the Company's manufacturing foundry partners as well as end-users as we prepare to enter the 800Gbps integrated photonics marketplace. The acquisition also advanced our Company’s patent portfolio of electro-optic polymer technology with an innovative polymer chemistry device patent that has potential to increase the performance of integrated modulators through optical amplification in a photonic integrated circuit (PIC) and enhance the functionality of the PIC by integrating laser light sources made using the polymer-based gain and a laser optical cavity defined on the Silicon photonic platform, with our Company’s high speed, high efficiency modulators. Having access to extremely low temperature ALD allows our Company's polymer modulators to be protected from the environment without the need for expensive and large footprint gold box packaging, propelling our Company forward with chip-scale packaging as required by major hyper-scaler end-users. The patent opens a new class of PICs which expands our variety of devices. The Patent is US patent number 9837794, EU patent number 3017489, China registration number 201480048236 & 201910230856, and is entitled, “Optoelectronic devices, methods of fabrication thereof and materials therefor.” ___________________________ 1 Set-up limited' indicates that the measurement was limited by the testing equipment. 2 University of Kiel, Germany supported the digital signal processor (DSP), and ETHZ supported the photodetector. 30 On December 12, 2022, we announced the receipt of U.S. patent number 11,506,918 B2 entitled “Hybrid electro-optic polymer modulator with atomic layer deposition (ALD) sealant layer,” which allows our proprietary polymers to be sealed to moisture and atmospheric gases in a very low temperature and quasi-hermetic environment through the use of a chip-scale packaging approach that can be applied in parallel at wafer level (i.e. in volume) and that eliminates the need for a separate hermetic enclosure or "gold box." Specifically, our electro-optic polymer modulators will be sealed with low-temperature conformal atomic layer deposition dielectric layers that are supported on a silicon substrate with passive silicon photonics waveguides. The sealant process will enable lower cost system implementation in a high-volume foundry environment. On December 13, 2022, we provided a world-class figure-of merit performance for modulators using electro-optical polymers and a plasmonic device design in conjunction with Polariton Technologies. Building from the world record performance and demonstration of a 250 GHz super high bandwidth electro-optical-electrical (EOE) link that was presented at the 2022 European Conference on Optical Communications (ECOC) 3 through a collaboration with ETH Zurich, these latest figure of merit results show the potential for extreme power savings for optical network equipment and demonstrated clearly that polymer-based technology platforms are positioned well for general implementation. These results were achieved using Polariton's electro-optic polymer-based plasmonic devices with Lightwave's electro-optic materials, with a bandwidth greater than 250 GHz. While these high-speed results have been reported previously, here Lightwave Logic reported for the first time that the voltage-length product Figure of Merit (FoM) for this modulator is just 60 Vum, which is approximately 10X better than the performance of the optical semiconductor modulators that are incumbent in the optical network and internet today. This figure of merit will allow ultra-low voltage operation and, enabled by Polariton's plasmonic modulator, the ability to carry significantly more data per modulator while consuming much less power. The net positive effect on system level equipment is expected not only to be significant, but perhaps more importantly, also a strong driver of a ''green photonics" platform. These results position our Company extremely well for next generation ultra-high-capacity interconnects for the hyper-scale market. The combination of electro-optic polymers and plasmonics is becoming an ideal sunrise technology platform to address the 'Achilles heel' of the data industry: high power consumption. As the industry contemplates the implementation of PAM4 200G lanes for 2023 and 2024, these optical devices already have shown capability for at least 2X these lane speeds. On January 12, 2023, our Chief Executive Officer, Dr. Michael Lebby, hosted a presentation and participated in an industry panel discussion at the 2023 Photonics Spectra Conference, a prominent virtual conference within the photonics industry. In the panel discussion, Dr. Lebby and a panel of industry experts from the entire photonics integrated chip (PIC) value chain, discussed lessons learned when scaling PIC production for volume applications. In his presentation, Dr. Lebby reviewed the potential solutions that electro-optical polymer modulators offer to integrated and hybrid photonics integrated chips (PICs), discussing their relevance to PIC packaging operations as well as how electro-optic polymers boost PIC speed and power efficiency. On January 30, 2023, our Chief Executive Officer, Dr. Michael Lebby, participated in an industry panel discussion at the 2023 Laser Focus World Executive Forum. The Laser Focus World Executive Forum is one of the industry's premier events for senior-level executives, technology directors, and business managers from technology companies around the world, delivering an in-depth analysis of the global laser and photonics market. In this discussion, Dr. Lebby joined a panel of industry experts to discuss how the success of Silicon Photonics is based on the premise that it is a semiconductor technology, and hence it can be manufactured in volume by semiconductor fabs. The panel addressed the manufacturing plans of photonic integrated circuits (PICs) by semiconductor fabs and how the photonic industry can transfer their processes to the semiconductor industry. On March 22, 2023, we announced that our latest commercial-class electro-optic polymer material achieved breakthrough performance metrics at 1310 nanometers (nm), a wavelength popular in hyperscale datacenter applications. These commercial-class improvements include a significantly higher electro-optic coefficient exceeding 200 pm/V, which allows for very low drive power of 1 volt or less. Other characteristics include optimized chromophore loading, superior low optical loss, excellent temporal stability at 85 0 Celsius, and extremely high thermal and photo stability. The breakthrough commercial-class electro-optic material is expected to enable ultra-small footprint modulators with at least 100 GHz bandwidth as well as meeting all critical requirements for pluggable transceivers, on-board optics and co-packaging solutions. Additionally, the achievement of these results at the 1310nm bandwidth positions us for potential near-term licensing opportunities in datacenter applications. In April 2023, our Chief Executive Officer, Dr. Michael Lebby, co-chaired the Photonic Integrated Circuits (PIC) International Conference in Brussels, Belgium. Industry-leading insiders delivered more than 30 presentations spanning six sectors at the conference. The conference provided attendees with an up-to-date overview of the status of the global photonics industry as well as the opportunity to meet many other key players within the community. In addition to serving as co-chair of the event, Dr. Lebby hosted a presentation for in-person attendees within the "Scaling PICs in Volume Using Foundries" track, focusing on the industry's consideration of electro-optic polymer modulators due to their increased modulation speed, lower power consumption, and potential for future multi-Tbps aggregated data-rates in the next decade. Additionally, Dr. Lebby discussed the latest results on foundry fabricated EO polymers, as well as the latest work in photonics roadmaps on both the integrated photonics (PIC) level as well as PIC packaging level. _____________________________ 3 The groundbreaking results were presented by Stefan Koepfli (ETH Zurich) as part of a peer-reviewed post-deadline paper presented at the prestigious 2022 European Conference on Optical Communications (ECOC) in Basel, Switzerland on September 22, 2022. The post-deadline paper is titled ">500 GHz Bandwidth Graphene Photodetector Enabling Highest-Capacity Plasmonic-to-Plasmonic Links." 31 On May 4, 2023, we announced, that in conjunction with our research partners at the Karlsruhe Institute of Technology and Solarix, the achievement of record optical modulator performance using our Company's latest Perkinamine ® Series 5 material at extremely low cryogenic temperatures, delivering the potential to revolutionize applications in supercomputers, quantum circuits and advanced computing systems. Building from the world record performance and demonstration of super high bandwidth, and super low voltage electro-optic modulators with Karlsruhe Institute of Technology and Silorix over the past year, the results have the potential to enable supercomputing and quantum systems to be more competitive than standard computational systems given its faster speeds at low temperatures. This achievement opens huge opportunities to our Company in the areas of supercomputing and quantum systems by giving access to very high data rate, low power optical modulators. On May 18, 2023, we announced the receipt of U.S. patent number 11,614,670 B2 entitled "Electro-optic polymer devices having high performance claddings and methods of preparing the same," which is a cutting-edge design technique, enhancing the performance of polymer modulators through the use of innovative polymer cladding design that is amenable for high-volume foundry fabrication when integrated with silicon photonics. The patent details a novel fabrication process that allows our proprietary polymers to perform more effectively and to be fabricated by silicon foundries in a high-volume manufacturing environment. It also introduces a more efficient process for improving the performance of the polymer claddings, leading to increased poling efficiency and lower losses in both optical and RF aspects. This patent is helping us move forward with our commercial discussions through the enabling of enhanced performance and simplified manufacturing of our polymer modulators with silicon photonics. On May 25, 2023, we announced our Company's first commercial material supply license agreement for our Perkinamine ® chromophore materials. This agreement is to provide Perkinamine ® chromophore materials for polymer based photonic devices and photonic integrated circuits (PICs). Supplying licensed materials is one prong of our Company's three-prong revenue model and business strategy that includes polymer modulator products as well as technology transfer. This agreement recognizes market acceptance and competitive advantage of our technology and validates the first prong of our business model. Further, it represents tangible commercial progress for electro-optic polymers as part of our business plan. On May 31, 2023, we announced the receipt of U.S. patent number 11,661,428 entitled "Nonlinear Optical Chromophores, Nonlinear Optical Materials Containing the Same, and Uses Thereof in Optical Devices," which details an innovative organic chromophore design using a novel 'thiophene bridge' to significantly improve material performance in a production environment. This is accomplished by designing thiophene-containing bridging groups that are positioned between the electron-donating and electron-accepting ends of the chromophore. These designs provide nonlinear optical chromophores with significantly improved optical properties and improved stability. We expect this patent will help us progress our commercial discussions with potential customers. In June 2023, we announced the publication of World International Property Organization (WIPO) PCT Patent Publication - PCT Patent No. WO 2023/102066 entitled “Nonlinear Optical Materials Containing High Boiling Point Solvents, and Methods of Efficiently Poling The Same,” which illustrates novel organic chemical structural designs that offer increased poling efficiency, as well as thermal stability for electro-optic materials. These designs provide non-linear optical chromophores with significantly improved material properties and stability for processing and fabrication by commercial foundries. Specifically, the patent teaches material processing and poling methods that directly leads to significantly enhanced electro-optic efficiency (r33) as compared to previous poling techniques. We consider this WIPO PCT Patent Publication to be a strong step forward in the scaling and volume commercialization of our polymer technology platform. On August 1, 2023, we appointed respected industry executive Laila Partridge to our Board of Directors. Ms. Partridge brings over 30 years of executive experience in technology, corporate innovation and finance to our Board – having worked with a wide range of technologies, including telecommunications, internet infrastructure, AI, internet of things and more. She was named by Boston Business Journal as one of the ten "2017 Women to Watch in Science and Technology". She currently serves as Founder and Chief Executive Officer of The HardTech Project, a new venture with a novel approach to early-stage hardware investing. Previously, she was Managing Director of the STANLEY + Techstars Accelerator where she directed a global effort for Stanley Black & Decker's Chief Technology Officer to identify and invest in innovative technologies for industrial applications with an emphasis on electrification, sustainability and advanced manufacturing. Prior to that, she began her technology career at Intel Capital, serving as a Director of Strategic Investments. Ms. Partridge began her career at Wells Fargo, where she ultimately achieved the role of VP of Corporate Banking, having led complex corporate finance transactions for the company's senior secured debt agencies in the Midwest. Ms. Partridge brings significant board experience to the Board of Directors, including at Intel Capital serving privately-held technology companies, and in her current role as an independent Director at Cambridge Trust (NASDAQ: CATC). She holds a Bachelor's degree with Honors from Wellesley College. On August 21, 2023, we announced the completion of new laboratory production facilities, expanding our corporate headquarters by over 65%, nearly 10,000 square feet, for a total of approximately 23,500 square feet to support new commercial activity, including enabling commercial device testing and evaluation, production reliability testing, laser characterization, SEM analysis and the expansion of our Company's chemical synthesis production line. On October 3, 2023, we announced our receipt of the 2023 Industry Award for Most Innovative Hybrid PIC/Optical Integration Platform from the European Conference on Optical Communications (ECOC) – a premier industry exhibition – held in Glasgow, Scotland from October 2-4, 2023. ECOC is one of the leading conferences on optical communication and attracts top industry minds from across the world. The ECOC awards emphasize technology and product commercialization, highlighting significant achievements in advancing the business of optical communications, transport, networking, fiber-based products, photonic integration circuits and related developments. The Innovative Product category with 5 subcategories looks across the industry at new products driving change in their respective market segment, and what is timely and helping to increase the use of optics. Metrics include design features that are photonics, electronics, thermal, mechanical, chemical, environmental and carbon footprint based. 32 As we move forward to diligently meet our goals, we continue to work closely with our packaging and foundry partners for 112Gbaud prototypes, and we are advancing our reliability and characterization efforts to support our prototyping. Depending on electrical encoding schemes such as PAM4, or PAM8, or wavelength optical multiplexing, these Gigabaud rates roughly translate to 200Gbps and 300Gbps per lane, and are the key speed rates for emerging 800Gbps to future possible 1200Gbps applications. Our partnership with silicon-based foundries will allow us to scale commercial volumes of electro-optic polymer modulator devices using large silicon wafers, and we are currently working to have our fabrication processes accepted into foundry PDKs (process development kits). These are the recipes that foundries use to manufacture devices in their fabrication plants. We are actively engaged with test equipment manufacturers of the most advanced test equipment to test our state-of-the-art polymer devices. We continue to engage with multiple industry bodies to promote our roadmap. We continue to fine tune our business model with target markets, customers, and technical specifications. Our business model includes the licensing of our strong IP and Patent portfolio, as well as technology transfer to entities such as foundries. Discussions with prospective customers are validating that our modulators are ideally suited for the datacenter and telecommunications markets that are over 10km in length. Details and feedback of what these prospective customers are seeking from a prototype are delivered to our technical team. Capital Requirements We commenced commercial operations in May 2023 and we do not generate sufficient revenues to pay for our operating expenses. We have incurred substantial net losses since inception. We have satisfied our capital requirements since inception primarily through the issuance and sale of our common stock. Results of Operations Comparison of three months ended September 30, 2023 to three months ended September 30, 2022 Revenues The Company's first commercial agreement occurred in May 2023 from a material supply and license agreement (the “License Agreement”) that incorporates the Company's patented electro-optic polymer materials for use in manufacturing photonic devices (the “Licensed Product”). All revenues are recognized over time commencing with the Company’s first commercial agreement in May 2023. No revenues were recognized for the three-month period ending September 30, 2023 since the licensee did not requisition material as of September 30, 2023. An up-front licensing fee in the amount of $50,000 was paid during the three-month period ending June 30, 2023 and is recorded in short term liability deferred revenue in the Company’s balance sheet as of September 30, 2023. During October 2023, the licensee requisitioned material under the License Agreement. The Company will recognize related revenue during the quarter ending December 31, 2023. Operating Expenses For the Three Months Ending September 30, 2023 For the Three Months Ending September 30, 2022 Change from Prior Three Month Period Percent Change from Prior Three Month Period Research and development $ 4,040,941 $ 3,587,692 $ 453,249 13% General and administrative 1,345,335 1,144,624 200,711 18% $ 5,386,276 $ 4,732,316 $ 653,960 14% Research and development expenses increased for the three months ended September 30, 2023, as compared to the three months ended September 30, 2022, primarily due to increases in research and development salary expenses, research and development non-cash stock option and RSA amortization, rent expense, recruiting fees, chemistry and wafer fabrication materials and supplies and research and development consulting expenses, offset by decreases in prototype device development and research and development travel expenses. Research and development salary expenses increased by $509,236 in the three months ended September 30, 2023, compared to the same period in 2022. Research and development non-cash stock option and RSA amortization expenses increased by $154,175 in the three months ended September 30, 2023, compared to the same period in 2022. Rent expense increased by $87,689 in the three months ended September 30, 2023, compared to the same period in 2022. Recruiting fees increased by $34,315 in the three months ended September 30, 2023, compared to the same period in 2022. Chemistry and wafer fabrication materials and supplies increased by $26,352 in the three months ended September 30, 2023, compared to the same period in 2022. Research and development consulting expenses increased by $13,236 in the three months ended September 30, 2023, compared to the same period in 2022. These increases were offset by a decrease in prototype device development expenses of $385,725 and a decrease in research and development travel expense of $24,234 in the three months ended September 30, 2023, compared to the same period in 2022. 33 We expect to continue to incur substantial research and development expenses developing and commercializing our photonic devices, and electro-optic materials platform. These expenses will increase as a result of accelerated development effort to support commercialization of our non-linear optical polymer materials technology; to build photonic device prototypes; working with semiconductor foundries; hiring additional technical and support personnel; engaging senior technical advisors; pursuing other potential business opportunities and collaborations; customer testing and evaluation; and incurring related operating expenses. General and administrative expenses increased for the three months ended September 30, 2023, as compared to the three months ended September 30, 2022, primarily due to increases in general and administrative non-cash stock option and RSA amortization, salary, office expenses, general and administrative consulting fees, rent expense, accounting and software expenses, offset by a decrease in legal fees. General and administrative non-cash stock option and RSA amortization expenses increased by $91,667 in the three months ended September 30, 2023, compared to the same period in 2022. Salary expense increased by $49,153 in the three months ended September 30, 2023, compared to the same period in 2022. Office expenses increased by $43,880 in the three months ended September 30, 2023, compared to the same period in 2022. General and administrative consulting fees increased by $37,600 in the three months ended September 30, 2023, compared to the same period in 2022. Rent expense increased by $29,319 in the three months ended September 30, 2023, compared to the same period in 2022. Accounting expenses increased by $27,564 in the three months ended September 30, 2023, compared to the same period in 2022. Software expenses increased by $26,479 in the three months ended September 30, 2023, compared to the same period in 2022. Legal expenses decreased by $130,025 in the three months ended September 30, 2023, compared to the same period in 2022. Other Income (Expense) For the Three Months Ending September 30, 2023 For the Three Months Ending September 30, 2022 Change from Prior Three Month Period Percent Change from Prior Three Month Period Other Income/(Expense) $ 221,685 $ (71,067 ) $ 292,752 412% Other income increased for the three months ended September 30, 2023, as compared to the three months ended September 30, 2022, primarily due to an increase in interest income earned on money market account of $220,025 and a decrease in commitment fee associated with the purchase of shares by an institutional investor for sale under a stock purchase agreement in the amount of $47,868. Net Loss For the Three Months Ending September 30, 2023 For the Three Months Ending September 30, 2022 Change from Prior Three Month Period Percent Change from Prior Three Month Period Net Loss $ 5,164,591 $ 4,803,383 $ 361,208 8% Net loss was $5,164,591 and $4,803,383 for the three months ended September 30, 2023 and 2022, respectively, for an increase of $361,208 due primarily to increases in salaries, non-cash stock option and RSA amortization expense, rent expense, consulting fees, office expense, research and development recruiting fees, accounting fees, software expense and wafer fabrication materials and supplies expenses, offset by decreases in prototype device development expenses, legal fees, commitment fee associated with the purchase of shares by an institutional investor for sale under a stock purchase agreement and research and development travel expenses and an increase in other income resulting from interest income earned on money market account. Results of Operations Comparison of nine months ended September 30, 2023 to nine months ended September 30, 2022 Revenues The Company's first commercial agreement occurred in May 2023 from a material supply and license agreement (the “License Agreement”) that incorporates the Company's patented electro-optic polymer materials for use in manufacturing photonic devices (the “Licensed Product”). All revenues are recognized over time commencing with the Company’s first commercial agreement in May 2023. No revenues were recognized for the nine month period ending September 30, 2023 since the licensee did not requisition material as of September 30, 2023. An up-front licensing fee in the amount of $50,000 was paid during the nine month period ending September 30, 2023 and is recorded in short term liability deferred revenue in the Company’s balance sheet as of September 30, 2023. During October 2023, the licensee requisitioned material under the License Agreement. The Company will recognize related revenue during the quarter ending December 31, 2023. 34 Operating Expenses For the Nine Months Ending September 30, 2023 For the Nine Months Ending September 30, 2022 Change from Prior Nine Month Period Percent Change from Prior Nine Month Period Research and development $ 12,006,758 $ 8,994,047 $ 3,012,711 33% General and administrative 3,879,515 3,017,191 862,324 29% $ 15,886,273 $ 12,011,238 $ 3,875,035 32% Research and development expenses increased for the nine months ended September 30, 2023, as compared to the nine months ended September 30, 2022, primarily due to increases in research and development salary expenses, research and development non-cash stock option and RSA amortization, recruiting fees, employee relocation expenses, chemistry and wafer fabrication materials and supplies, research and development consulting expenses, testing expenses and rent expense. Research and development salary expenses increased by $1,216,792 in the nine months ended September 30, 2023, compared to the same period in 2022. Research and development non-cash stock option and RSA amortization expenses increased by $785,224 in the nine months ended September 30, 2023, compared to the same period in 2022. Recruiting fees increased by $201,541 in the nine months ended September 30, 2023, compared to the same period in 2022. Employee relocation expenses increased by $178,626 in the nine months ended September 30, 2023, compared to the same period in 2022. Chemistry and wafer fabrication materials and supplies increased by $141,719 in the nine months ended September 30, 2023, compared to the same period in 2022. Research and development consulting expenses increased by $124,930 in the nine months ended September 30, 2023, compared to the same period in 2022. Research and development testing expenses increased by $106,604 in the nine months ended September 30, 2023, compared to the same period in 2022. Rent expense increased by $98,267 in the nine months ended September 30, 2023, compared to the same period in 2022. We expect to continue to incur substantial research and development expenses developing and commercializing our photonic devices, and electro-optic materials platform. These expenses will increase as a result of accelerated development effort to support commercialization of our non-linear optical polymer materials technology; to build photonic device prototypes; working with semiconductor foundries; hiring additional technical and support personnel; engaging senior technical advisors; pursuing other potential business opportunities and collaborations; customer testing and evaluation; and incurring related operating expenses. General and administrative expenses increased for the nine months ended September 30, 2023, as compared to the nine months ended September 30, 2022, primarily due to increases in general and administrative non-cash stock option and RSA amortization, legal fees, general and administrative consulting fees, D&O insurance expenses, accounting fees, general and administrative salary expenses, investor relations expenses, office expenses, rent expense and software expenses. General and administrative non-cash stock option and RSA amortization expenses increased by $142,505 in the nine months ended September 30, 2023, compared to the same period in 2022. Legal fees increased by $136,096 in the nine months ended September 30, 2023, compared to the same period in 2022. General and administrative consulting fees increased by $104,100 in the nine months ended September 30, 2023, compared to the same period in 2022. D&O insurance expenses increased by $96,839 in the nine months ended September 30, 2023, compared to the same period in 2022. General and administrative salary expenses increased by $68,267 in the nine months ended September 30, 2023, compared to the same period in 2022. Accounting fees increased by $67,798 in the nine months ended September 30, 2023, compared to the same period in 2022. Investor relations expenses increased by $54,714 in the nine months ended September 30, 2023, compared to the same period in 2022. Office expenses increased by $52,693 in the nine months ended September 30, 2023, compared to the same period in 2022. Rent expense increased by $34,619 in the nine months ended September 30, 2023, compared to the same period in 2022. Software expenses increased by $31,155 in the nine months ended September 30, 2023, compared to the same period in 2022. Other Expense For the Nine Months Ending September 30, 2023 For the Nine Months Ending September 30, 2022 Change from Prior Nine Month Period Percent Change from Prior Nine Month Period Other Expense $ (212,083 ) $ (150,504 ) $ (61,579 ) 41% Other expenses increased for the nine months ended September 30, 2023, as compared to the nine months ended September 30, 2022, primarily due to an increase in commitment fee associated with the purchase of shares by an institutional investor for sale under a stock purchase agreement in the amount of $426,701 offset primarily by a higher interest income earned on money market account in the amount of $337,454. 35 Net Loss For the Nine Months Ending September 30, 2023 For the Nine Months Ending September 30, 2022 Change from Prior Nine Month Period Percent Change from Prior Nine Month Period Net Loss $ 16,098,356 $ 12,161,742 $ 3,936,614 32% Net loss was $16,098,356 and $12,161,742 for the nine months ended September 30, 2023 and 2022, respectively, for an increase of $3,936,614 due primarily to increases in salary expense, non-cash stock option and RSA amortization, commitment fee associated with the purchase of shares by an institutional investor for sale under a stock purchase agreement, research and development recruiting fees, research and development employee relocation costs, chemistry and wafer fabrication materials and supplies, consulting fees, testing expenses, rent, D&O insurance, legal fees, accounting fees, investor relations fees, office expenses and software expenses offset by a decrease primarily related to a higher interest income earned on money market account. Liquidity and Capital Resources Sources and Uses of Cash Our primary source of operating cash inflows was proceeds from the sale of common stock to Lincoln Park pursuant to purchase agreements with the institutional investor and proceeds from sale of common stock by Roth Capital pursuant to the at the market sale agreement with the investment banking company as described in Note 10 to the Financial Statements, proceeds received pursuant to the exercise of options and warrants and a proceed received under a material supply and license agreement which the Company recorded as deferred revenue as of September 30, 2023. All of the registered shares under the January 21, 2019 purchase agreement with Lincoln Park have been issued as of June 30, 2021. On July 2, 2021, the Company filed a $100 million universal shelf registration statement which became effective on July 9, 2021. All of the registered shares under the October 4, 2021 purchase agreement with Lincoln Park (the “ 2021 Purchase Agreement ”) have been issued as of June 30, 2023. On February 28, 2023, our Company entered into a purchase agreement with Lincoln Park (the “ 2023 Purchase Agreement ”) to sell up to $30 million of common stock over a 36-month period, with $16.9 million remaining on the 2023 Purchase Agreement as of the date of this filing. On December 9, 2022, our Company entered into the Roth Sales Agreement with Roth Capital, as sales agent, whereby pursuant to the Roth Sales Agreement, our Company may offer and sell up to $35,000,000 in shares of our common stock, from time to time through Roth Capital. As of the date of this filing $33.6 million remains available to our Company pursuant to the Roth Sales Agreement. During the nine months ended September 30, 2023, our Company received $16,063,909 in proceeds pursuant to the 2021 Purchase Agreement and 2023 Purchase Agreement with Lincoln Park, $1,378,474 in proceeds pursuant to the Roth Sales Agreement with Roth Capital, $632,074 in proceeds pursuant to the exercise of options and warrants and $50,000 in a proceed received under a material supply and license agreement which the company recorded as deferred revenue as of September 30, 2023. During the year ended December 31, 2022, our Company received $12,775,268 in proceeds pursuant to the 2021 Purchase Agreement with Lincoln Park and $653,895 in proceeds pursuant to the exercise of options and warrants. During the nine months ended September 30, 2023, our primary sources of cash outflows from operations included payroll, rent, utilities, payments to vendors including prototypes development and foundries expenses and third-party service providers. During the year ended December 31, 2022, our primary sources of cash outflows from operations included payroll, rent, utilities, payments to vendors including prototypes development and foundries expenses, third-party service providers and payroll taxes related to cashless option exercise. Our future expenditures and capital requirements will depend on numerous factors, including: the progress of our research and development efforts; the rate at which we can, directly or through arrangements with original equipment manufacturers, introduce and sell products incorporating our polymer materials technology; the costs of filing, prosecuting, defending and enforcing any patent claims and other intellectual property rights; market acceptance of our products and competing technological developments; and our ability to establish cooperative development, joint venture and licensing arrangements. We expect that we will incur approximately $1,750,000 of expenditures per month over the next 12 months. We expect the 2023 Purchase Agreement with Lincoln Park and the Roth Sales Agreement, which we detail below, to provide us with sufficient funds to maintain our operations over that period of time. Our current cash position enables us to finance our operations through April 2025 before we will be required to replenish our cash reserves pursuant to the 2023 Purchase Agreement Lincoln Park or the Roth Sales Agreement. Our cash requirements are expected to increase at a rate consistent with our Company’s path to revenue growth as we expand our activities and operations with the objective of commercializing our electro-optic polymer technology. We currently have no debt to service. 36 We expect that our cash used in operations will continue to increase during 2023 and beyond as a result of the following planned activities: · The addition of management, sales, marketing, technical and other staff to our workforce;   · Increased spending for the expansion of our research and development efforts, including purchases of additional laboratory and production equipment;   · Increased spending in marketing as our products are introduced into the marketplace;   · Partnering with commercial foundries to implement our electro-optic polymers into accepted PDKs by the foundries;   · Developing and maintaining collaborative relationships with strategic partners;   · Developing and improving our manufacturing processes and quality controls; and   · Increases in our general and administrative activities related to our operations as a reporting public company and related corporate compliance requirements.   2021 and 2023 Purchase Agreements - Lincoln Park On October 4, 2021 , our Company entered into the 2021 Purchase Agreement with Lincoln Park, pursuant to which Lincoln Park agreed to purchase from us up to $33 million of our common stock (subject to certain limitations) from time to time over a 36-month period. All of the registered shares under the 2021 Purchase Agreement with Lincoln Park have been issued as of June 30, 2023. On February 28, 2023, our Company entered into the 2023 Purchase Agreement with Lincoln Park, pursuant to which Lincoln Park agreed to purchase from us up to $30 million of our common stock (subject to certain limitations) from time to time over a 36-month period. Pursuant to the 2023 Purchase Agreement, Lincoln Park is obligated to make purchases as the Company directs in accordance with the 2023 Purchase Agreement, which may be terminated by the Company at any time, without cost or penalty. Sales of shares will be made in specified amounts and at prices that are based upon the market prices of our common stock immediately preceding the sales to Lincoln Park. We expect this financing to provide us with sufficient funds to maintain our operations for the foreseeable future. With the additional capital, we expect to achieve a level of revenues attractive enough to fulfill our development activities and adequate enough to support our business model for the foreseeable future. There are no trading volume requirements or restrictions under the 2023 Purchase Agreement, and we will control the timing and amount of any sales of our common stock to Lincoln Park. Lincoln Park has no right to require any sales by us, but is obligated to make purchases from us as we direct in accordance with the 2023 Purchase Agreement. We can also accelerate the amount of common stock to be purchased under certain circumstances. There are no limitations on the use of proceeds, financial or business covenants, restrictions on future financings (other than restrictions on the Company’s ability to enter into a similar type of agreement or equity line of credit during the term, excluding an at-the-market transaction with a registered broker-dealer), rights of first refusal, participation rights, penalties or liquidated damages in the 2023 Purchase Agreement. Roth Sales Agreement – Roth Capital On December 9, 2022, we entered into the Roth Sales Agreement with Roth Capital, as sales agent. Pursuant to the Roth Sales Agreement, our Company may offer and sell up to $35,000,000 in shares of our common stock, from time to time through Roth Capital. Upon delivery of a placement notice based on our Company’s instructions and subject to the terms and conditions of the Roth Sales Agreement, Roth Capital may sell the shares by methods deemed to be an “at the market offering” as defined in Rule 415(a)(4) promulgated under the Securities Act, including sales made directly on or through The Nasdaq Capital Market, on any other existing trading market for the Company’s common stock, in negotiated transactions at market prices prevailing at the time of sale or at prices related to such prevailing market prices, or by any other method permitted by law, including negotiated transactions, subject to the prior written consent of our Company. We are not obligated to make any sales of shares under the Roth Sales Agreement. The Company or Roth Capital may suspend or terminate the offering of shares upon notice to the other party, subject to certain conditions. Roth Capital will act as sales agent on a commercially reasonable efforts basis consistent with its normal trading and sales practices and applicable state and federal law, rules and regulations and the rules of Nasdaq. We have agreed to pay Roth Capital commissions for its services of acting as agent of 3.0% of the gross proceeds from the sale of the shares pursuant to the Roth Sales Agreement. The amount of proceeds we receive from the Roth Sales Agreement, if any, will depend upon the number of shares of our common stock sold and the market price at which they are sold. There can be no assurance that we will be able to sell any shares under or fully utilize the Roth Sales Agreement. Roth Capital is not required to sell any specific number of shares of our common stock under the Roth Sales Agreement. We intend to use net proceeds from the Roth Sales Agreement for general corporate purposes, including, without limitation, sales and marketing activities, product development, making acquisitions of assets, businesses, companies or securities, capital expenditures, and for working capital needs. We cannot assure you that we will meet the conditions of the 2023 Purchase Agreement with Lincoln Park in order to obligate Lincoln Park to purchase our shares of common stock, and we cannot assure you that we will be able to sell any shares under or fully utilize the Roth Sales Agreement. In the event we fail to do so, and other adequate funds are not available to satisfy long-term capital requirements, or if planned revenues are not generated, we may be required to substantially limit our operations. This limitation of operations may include reductions in capital expenditures and reductions in staff and discretionary costs. 37 Analysis of Cash Flows For the nine months ended September 30, 2023 Net cash used in operating activities was $9,913,798 for the nine months ended September 30, 2023, primarily attributable to the net loss of $16,098,356 adjusted by $5,085,114 in options issued for services, $198,253 amortization of deferred compensation, $607,728 in common stock issued for services, $797,500 in depreciation expenses and patent amortization expenses, $138,502 amortization of right of use asset, $581 loss on disposal of property and equipment, $87,058 in prepaid expenses and ($730,178) in accounts payable, accrued expenses, deferred revenue and other liabilities. Net cash used in operating activities consisted of payments for research and development, legal, professional and consulting expenses, rent and other expenditures necessary to develop our business infrastructure. Net cash used by investing activities was $1,386,164 for the nine months ended September 30, 2023, consisting of $215,061 in cost for intangibles, $1,813,813 in asset additions for the Colorado headquarter facility and labs offset by $642,120 in a loan repayment and $590 in proceeds on sale of property and equipment. Net cash provided by financing activities was $18,074,457 for the nine months ended September 30, 2023 and consisted of $632,074 in proceeds from exercise of options and warrants, $16,063,909 in proceeds from resale of common stock to an institutional investor and $1,378,474 in proceeds from at the market sale of common stock by an investment banking company. On September 30, 2023, our cash and cash equivalents totaled $30,876,646, our assets totaled $39,104,017, our liabilities totaled $3,683,798 and we had stockholders’ equity of $35,420,219. For the nine months ended September 30, 2022 Net cash used in operating activities was $7,700,332 for the nine months ended September 30, 2022, primarily attributable to the net loss of $12,161,742 adjusted by $4,288,172 in options issued for services, $67,467 amortization of deferred compensation, $181,027 in common stock issued for services, $758,285 in depreciation expenses and patent amortization expenses, ($414,766) in prepaid expenses, ($536,999) in accounts payable, accrued bonuses and accrued expenses and $118,224 in cashless option exercise expense. Net cash used in operating activities consisted of payments for research and development, legal, professional and consulting expenses, rent and other expenditures necessary to develop our business infrastructure. Net cash used by investing activities was $1,807,415 for the nine months ended September 30, 2022, consisting of $47,705 in cost for intangibles, $1,171,530 in asset additions for the Colorado headquarter facility and labs and $588,180 in a loan issuance. Net cash provided by financing activities was $11,096,777 for the nine months ended September 30, 2022 and consisted of $470,690 in proceeds from exercise of options and warrants, $10,709,293 in proceeds from resale of common stock to an institutional investor offset by $83,206 in cashless option exercise tax payments. On September 30, 2022, our cash and cash equivalents totaled $25,021,642, our assets totaled $30,148,946, our liabilities totaled $1,354,749 and we had stockholders’ equity of $28,794,197. Contractual Obligations On November 22, 2022, our Company entered into an amendment to its operating lease to lease an additional 9,684 square feet of adjacent office and warehouse space that became effective June 1, 2023. See Note 8 - Leases to the financial statements herein for a discussion of the lease amendment. There have been no other material changes outside the ordinary course of business in our contractual commitments during the nine months ended September 30, 2023. Significant Accounting Policies We believe our significant accounting policies affect our more significant estimates and judgments used in the preparation of our financial statements. Our Annual Report on Form 10-K for the year ended December 31, 2022 contains a discussion of these significant accounting policies. The Company’s significant accounting policies have not materially changed since that report was filed. Item 3 Quantitative and Qualitative Disclosures About Market Risk At September 30, 2023, we had $30.9 million in cash and cash equivalents. For the purposes of this Item 3 we consider all highly liquid instruments with maturities of three months or less at the time of purchase to be cash equivalents. The fair value of all of our cash equivalents is determined based on “Level 1” inputs, which are based upon quoted prices for identical or similar instruments in markets that are active. We do not use any market risk sensitive instruments to hedge any risks, and we hold no market risk sensitive instruments for trading or speculative purposes. We place our cash investments in instruments that meet credit quality standards. At September 30, 2023, we had deposits with a financial institution that exceeded the Federal Depository Insurance coverage. Market Interest Rate Risk We are exposed to market risk related to changes in interest rates. Our primary exposure to market risk is interest rate sensitivity, which is affected by changes in the general level of U.S. interest rates. If a 10% change in interest rates had occurred on September 30, 2023, this change would not have had a material effect on the fair value of our investment portfolio as of that date. Due to the short holding period of our investments and the nature of our investments, we have concluded that we do not have a material financial market risk exposure. 38 Item 4 Controls and Procedures Evaluation of Disclosure Controls and Procedures. The Company’s management, with the participation of the Company’s Principal Executive Officer and Principal Financial Officer, evaluated the effectiveness of the Company’s disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended) as of September 30, 2023. Based on this evaluation, the Company’s Principal Executive Officer and Principal Financial Officer concluded that, as of September 30, 2023 the Company’s disclosure controls and procedures were effective, in that they provide reasonable assurance that information required to be disclosed by the Company in the reports that it files or submits under the Securities Exchange Act of 1934, as amended, is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and is accumulated and communicated to the Company’s management, including the Company’s Principal Executive Officer and Principal Financial Officer, as appropriate to allow timely decisions regarding required disclosure. Changes in Internal Control Over Financial Reporting. There were no changes in our internal control over financial reporting during the quarter ended September 30, 2023 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting. 39 PART II – OTHER INFORMATION Item 1 Legal Proceedings No material legal proceedings. Item 1A Risk Factors In addition to the information set forth in this Form 10-Q, you should carefully consider the risk factors discussed in Part I, Item 1A. Risk Factors in our 2022 Form 10-K, which could materially affect our business, financial condition or future results. The risks described in this Form 10-Q and in our 2022 Form 10-K are not the only risks facing our Company. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial may also materially adversely affect our business, financial condition or future results. We have incurred substantial operating losses since our inception and will continue to incur substantial operating losses for the foreseeable future. Since our inception, we have been engaged primarily in the research and development of our electro-optic polymer materials technologies and potential products. As a result of these activities, we incurred significant losses and experienced negative cash flow since our inception. We incurred a net loss of $5.1 million for the nine months ended September 30, 2023 and a net loss of $ 17.2 million for the year ended December 31, 2022 and $18.6 million for the year ended December 31, 2021 . As of September 30, 2023, we had an accumulated deficit of $122.9 million. We anticipate that we will continue to incur operating losses through at least 2023. We may not be able to generate significant revenue either through customer contracts for our potential products or technologies or through development contracts from the U.S. government or government subcontractors. We expect to continue to make significant operating and capital expenditures for research and development and to improve and expand production, sales, marketing and administrative systems and processes. As a result, we will need to generate significant revenue to achieve profitability. We cannot assure you that we will ever achieve profitability . We will require additional capital to continue to fund our operations and if we do not obtain additional capital, we may be required to substantially limit our operations. Our business does not presently generate the cash needed to finance our current and anticipated operations. Based on our current operating plan and budgeted cash requirements, we believe that we have sufficient funds to finance our operations through April 2025; however, we will need to obtain additional future financing after that time to finance our operations until such time that we can conduct profitable revenue-generating activities. We expect that we will need to seek additional funding through public or private financings, including equity financings, and through other arrangements, including collaborative arrangements. Poor financial results, unanticipated expenses or unanticipated opportunities could require additional financing sooner than we expect. Other than with respect to the 2023 Purchase Agreement and the Roth Sales Agreement; we have no plans or arrangements with respect to the possible acquisition of additional financing, and such financing may be unavailable when we need it or may not be available on acceptable terms. We currently have a remaining amount of $16.9 million that is available to our Company pursuant to the 2023 Purchase Agreement with Lincoln Park, and $33.6 million that is available to our Company pursuant to the Roth Sales Agreement with Roth Capital. Our forecast of the period of time through which our financial resources will be adequate to support our operations is a forward-looking statement and involves risks and uncertainties, and actual results could vary as a result of a number of factors, including the factors discussed in our 2022 Form 10-K . We have based this estimate on assumptions that may prove to be wrong, and we could use our available capital resources sooner than we currently expect. Additional financing may not be available to us, due to, among other things, our Company not having a sufficient credit history, income stream, profit level, asset base eligible to be collateralized, or market for its securities. If we raise additional funds by issuing equity or convertible debt securities, the percentage ownership of our existing shareholders may be reduced, and these securities may have rights superior to those of our common stock. If adequate funds are not available to satisfy our long-term capital requirements, or if planned revenues are not generated, we may be required to substantially limit our operations. Item 2 Unregistered Sales of Equity Securities, Use of Proceeds, and Issuer Purchases of Equity Securities During the period covered by this report, we sold the following securities without registering the securities under the Securities Act: Date Security July 18, 2023 Common Stock — 19,000 shares of common stock at $0.78 per share pursuant to a warrant exercise. No underwriters were utilized, and no commissions or fees were paid with respect to any of the above transactions. These persons were the only offerees in connection with these transactions. We relied on Section 4(a)(2) and Rule 506 of Regulation D of the Securities Act since the transaction does not involve any public offering. 40 Item 3 Defaults Upon Senior Securities None. Item 4 Mine Safety Disclosures Not Applicable. Item 5 Other Information Amendment and Restatement of Bylaws On November 9, 2023, the Board of Directors amended and restated the Company’s restated bylaws (the “ Bylaws ”), effective immediately, primarily to: (i) amend the advance notice provision for stockholder nominations and proposals, and insert additional provisions, including, (a) updating the deadline for stockholders to submit notice to the Company of nominations and proposals (other than a stockholder proposal submitted under Rule 14a-8 of the Securities Exchange Act of 1934, as amended) to be not less than 120 days nor more than 150 days prior to the one-year anniversary of the Company’s proxy statement for the annual meeting for the preceding year, (b) requiring matters to be brought before an annual meeting to be brought only by a stockholder who is a stockholder of record of the Company, (c) requiring the inclusion of certain information about the stockholder and any Interested Person as defined in the Bylaws, (d) compliance with other matters and the submission of certain information, all as more fully described in the bylaws; (iii) amend the range of dates that the Board may fix as the record date for a meeting, (iv) amend the maximum age of directors, (v) amend the voting threshold to remove a director from office, (vi) make other changes to reflect updates in technology, and (vii) make other ministerial and conforming changes. Pursuant to the Bylaws, s tockholder proposals (including recommendations of nominees for election to the board of directors), other than a stockholder proposal submitted pursuant to SEC Rule 14a-8, in order to be voted on at the 2024 Annual Meeting, must be received by us not earlier than November 16, 2023 and not later than December 16, 2023 being, respectively, 150 days and 120 days prior to the one-year anniversary of the Company’s proxy statement for the annual meeting for the preceding year. Trading Arrangements Insider Trading Arrangements On July 19, 2023, Fred Leonberger, a member of our Company’s Board of Directors, adopted a non-Rule 10b5–1 trading arrangement as defined in Item 408(c) of Regulation S-K. The arrangement provided for the sale of 49,000 shares of the Company’s common stock and it terminated on July 19, 2023, after all of the shares were sold. The trading arrangement was adopted during an open trading window and satisfied the Company’s policies regarding insider transactions. Item 6 Exhibits The following exhibits are included herein: Exhibit No. Description of Exhibit Location 3.1 Amended and Restated Bylaws Filed herewith 31.1 Certification pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934, as amended, executed by the Principal Executive Officer of the Company. Filed herewith 31.2 Certification pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934, as amended, executed by the Principal Financial Officer of the Company. Filed herewith 32.1 Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, executed by the Principal Executive Officer of the Company. Furnished herewith 32.2 Certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, executed by the Principal Financial Officer of the Company. Furnished herewith 101.INS Inline XBRL Instance Document (the instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document) Filed herewith 101.SCH Inline XBRL Taxonomy Extension Schema Document Filed herewith 101.CAL Inline XBRL Taxonomy Extension Calculation Linkbase Document Filed herewith 101.DEF Inline XBRL Taxonomy Extension Definition Linkbase Document Filed herewith 101.LAB Inline XBRL Taxonomy Extension Label Linkbase Document Filed herewith 101.PRE Inline XBRL Taxonomy Extension Presentation Linkbase Document Filed herewith 104 Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101) Filed herewith 41 SIGNATURES Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized. LIGHTWAVE LOGIC, INC. Registrant By: /s/ Michael S. Lebby Michael S. Lebby, Chief Executive Officer (Principal Executive Officer) Date: November 9, 2023 By: /s/ James S. Marcelli James S. Marcelli, President, Chief Operating Officer (Principal Financial Officer) Date: November 9, 2023