PRECISION OPTICS CORPORATION, INC. 10-Q

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations. The following discussion of our financial condition and results of operations should be read in conjunction with the unaudited condensed consolidated financial statements and notes to those statements included elsewhere in this Quarterly Report on Form 10-Q for the quarter ended September 30, 2024 and with our audited consolidated financial statements for the year ended June 30, 2024 included in our Annual Report on Form 10-K, filed with the Securities and Exchange Commission on September 30, 2024. This Quarterly Report on Form 10-Q contains forward-looking statements. When used in this report, the words anticipate, suggest, estimate, plan, project, continue, ongoing, potential, expect, predict, believe, intend, may, will, should, could, would and similar expressions are intended to identify forward-looking statements. You should not place undue reliance on these forward-looking statements. Our actual results could differ materially from those anticipated in the forward-looking statements for many reasons, including the risks described in this report, the risks described in our Annual Report on Form 10-K for the year ended June 30, 2024 and other reports we file with the Securities and Exchange Commission. Although we believe the expectations reflected in the forward-looking statements are reasonable, they relate only to events as of the date on which the statements are made. We do not intend to update any of the forward-looking statements after the date of this report to conform these statements to actual results or to changes in our expectations, except as required by law. Overview We have been a developer and manufacturer of advanced optical instruments since 1982. Our proprietary medical instrumentation line, unique custom design and manufacturing capabilities, and expert engineering and development has generated traditional proprietary endoscopes and endocouplers as well as other custom imaging and illumination products for our customers’ use in minimally invasive surgical procedures. We design and manufacture 3D endoscopes and very small Microprecision lenses, assemblies and complete medical devices to meet the surgical community’s continuing demand for smaller, disposable, and more enhanced imaging systems for minimally invasive surgery. Effective June 1, 2019 we acquired the operating assets of Ross Optical Industries, Inc. of El Paso, Texas. As Ross Optical Industries we also operate as a supplier of custom optical components and assemblies for military and defense, medical and various other industrial applications. All products sold by us under the Ross Optical name include a custom or catalog optic, which is sourced through our extensive domestic and worldwide network of optical fabrication suppliers. Most systems make use of optical lenses, prisms, mirrors and windows and range from individual optical components to complex mechano-optical assemblies. Products often include thin film optical coatings that are applied using our in-house coating department. Effective October 1, 2021 we acquired the operating assets of Lighthouse Imaging, LLC of Windham, Maine. Our Lighthouse Imaging division supplements our operations as a manufacturer of advanced optical imaging systems and accessories and has provided further expertise in electrical engineering and development of end-to-end medical visualization devices. Product development competencies at Lighthouse Imaging include Systems, Optical, Mechanical, Electrical and Process Development Engineering. Since the purchase we have integrated these acquired engineering and operational capabilities to provide an expanded, unified offering to our customers. Our product development team has extensive experience developing visualization systems that are used in a variety of clinical applications. Lighthouse Imaging is an industry leader in chip-on-tip visualization systems. The markets in which we do business are highly competitive and include both foreign and domestic competitors. Many of our competitors are larger and have substantially greater resources than we do. Furthermore, other domestic or foreign companies, some with greater financial resources than we have, may seek to produce products or services that compete with ours. Over the years we have developed extensive experience collaborating with other optical specialists worldwide. 13 The markets for our products have increasingly been driven by the demand for smaller and more enhanced imaging systems by the needs of the surgical community, including applications for the brain, eye, ear, urology, cardiology/angiography and the spine. We market directly to established medical device companies primarily in the United States that we believe could benefit from our advanced endoscopy visualization systems. Through this direct marketing, referrals, attendance at trade shows and a presence in online professional association websites, we have expanded our on-going pipeline of projects to significant medical device companies as well as well-funded emerging technology companies. We expect our customer pipeline to continue to expand as development projects transition to production orders and new customer projects enter the development phase. Our Ross Optical division markets through existing customers and trade shows, in addition to proactive online marketing strategies executed primarily through its website. We produce micro-precision optics, which are millimeter-sized and smaller cameras with low manufacturing costs. The small size provides visualization for new procedures in new parts of the body and for existing procedures that are currently performed blind or with sub-optimal imaging, facilitating the development of new surgical procedures that are currently impractical. We use patented and patent-pending approaches to fabricating opto-mechanical and opto-electronic systems. We have developed and helped commercialize applications for numerous customers in the medical device and defense/aerospace industries. We believe that our future success depends to a large degree on our ability to develop new optical products and services to enhance the performance characteristics and methods of manufacture of existing products. Competition among medical device companies is increasing with multiple companies now pursuing less expensive, procedure specific robotic systems. We expect to continue to seek and obtain product-related design and development contracts with customers and to selectively invest our own funds on research and development, particularly in the areas of Microprecision TM optics, micro medical cameras, illumination, single-use endoscopes, and 3D endoscopes. We are one of only a handful of companies in the world to design and provide 3D endoscopes. By designing systems with low manufacturing costs, we have also begun to penetrate the single-use endoscope market. Single-use endoscopes virtually eliminate the potential for patient cross-contamination and support a number of additional operational benefits for hospitals and surgeons. We estimate this segment of the overall minimally invasive surgical market is growing at two to three times the rate of the overall market. Current sales and marketing activities are intended to broaden awareness of the benefits of our new technology platforms and our successful application of these new technologies to medical device projects requiring surgery-grade visualization from millimeter sized devices and 3D endoscopy, including single-use products and assemblies. We are registered to the ISO 9001:2015 and ISO 13485:2016 Quality Standards and comply with the FDA Good Manufacturing Practices. Our websites are www.poci.com, www.rossoptical.com, and www.lighthouseoptics.com. The information contained on our websites does not constitute part of this report. General This management’s discussion and analysis of financial condition and results of operations is based upon our unaudited consolidated financial statements, which have been prepared without audit, pursuant to the rules and regulations of the Securities and Exchange Commission. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses and related disclosures. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions and any such differences may be material. Critical Accounting Policies and Estimates There have been no significant changes in our critical accounting policies as disclosed in the Notes to our Financial Statements contained in our Annual Report on Form 10-K for the year ended June 30, 2024 filed with the Securities and Exchange Commission on September 30, 2024. 14 Results of Operations Revenue Three Months Ended September 30, 2024 Percent of Sales 2023 Percent of Sales Increase (Decrease) Percent Change Engineering Design Services $ 1,851,371 44.1 $ 1,900,999 44.0 $ (49,628 ) (2.6 ) Optical Components 2,080,188 49.6 1,903,311 44.0 176,877 9.3 Finished Products and Assemblies 265,494 6.3 516,945 12.0 (251,451 ) (48.6 ) Total Revenues $ 4,197,053 100.0 $ 4,321,255 100.0 $ 124,202 (2.9 ) Total revenues for the quarter ending September 30, 2024 were $4,197,053, as compared to $4,321,255 for the same period in the prior year, a decrease of $124,202. Revenue from Engineering Design Services decreased 2.6% during the quarter ending September 30, 2024 from the prior year period ending September 30, 2023. During the quarter ending September 30, 2024 engineering capacity, and therefore billable revenues, was reduced as a result of increased research and development activities. Revenue from Optical Components increased 9.3% during the three-month period ending September 30, 2024 from the prior year period ending September 30, 2023. The market for Optical Components was impacted beginning in the period ending September 30, 2023, as we noted lower order volumes as customers sought to rebalance their inventories, and we believe a recovery is now underway. Revenue from Finished Products and Assemblies decreased 48.6% during the quarter ending September 30, 2024 from the prior year quarter ending September 30, 2023. The decrease in revenue from Finished Products and Assemblies was primarily attributable to a manufacturing pause for a defense/aerospace customer that was occasioned by a change in specification finalized late in the quarter ending September 30, 2024. Gross Profit Gross margin decreased to 26.6% during the quarter ending September 30, 2024, compared to 33.9% for the quarter ending September 30, 2023. Gross profit decreased to $1,117,330 during the three months ended September 30, 2024, compared to $1,463,611 for the three months ended September 30, 2023, primarily driven by changes in the product sales mix and the decreases in revenue discussed above. Research & Development R&D expenses increased $187,901 to $400,659 during the quarter ending September 30, 2024, compared to $212,758 during the quarter ending September 30, 2023. R&D expenses for the period represent employee-related expenses to support product improvements, the development of new technologies and standardized approaches to address the opportunities for an evolving single-use medical device environment. Selling, General and Administrative Expenses SG&A expenses increased $307,466, or 18.6% to $1,963,612 during the three months ended September 30, 2024, compared to $1,656,146 during the three months ended September 30, 2023. The increase in SG&A for the three-month period was primarily due to increased recruitment costs, bad debt expense, consulting expenses and information technology expenses. 15 Liquidity and Capital Resources Based on our current plans and business conditions, management believes that the Company’s available cash and cash equivalents, the cash generated from operations, availability on our line of credit, and our ability to raise funds in the capital markets will be sufficient to provide for the Company’s working capital and capital expenditure requirements for at least 12 months from the date of this filing. However, our cash on hand and cash generated solely from operations may be insufficient to meet working capital needs for such period and we may be required to raise external financing in the short-term. Net Cash Used in Operating Activities During the three months ending September 30, 2024, net cash used in operating activities totaled $318,622 and included a net loss of $1,311,247, increases in inventory of $592,521, offset by increases in accounts payable and accrued expenses of $1,016,135, decreases in accounts receivable net of decreased customer deposit liabilities of $356,092, and non-cash items totaling $202,030. During the three months ending September 30, 2023, net cash used in operating activities totaled $1,372,989 and included a net loss of $464,515, increases in inventory of $194,995, increases in accounts receivable net of increased customer deposit liabilities of $375,426, decreases in accounts payable and accrued expenses of $390,719, and non-cash items totaling $164,886. Net Cash Used in Investing Activities During the three months ending September 30, 2024, net cash used in investing activities was $28,099, consisting of purchases of property and equipment and patent costs. During the three months ended September 30, 2023, net cash used in investing activities was $43,517, consisting of purchases of property and equipment and patent costs. Net Cash Provided by Financing Activities During the three months ending September 30, 2024, we made payments of $139,527 on term notes and capital leases and repaid $500,000 on our revolving line of credit. We raised a net of $1,204,542 through the issuance of new shares in a registered direct common stock offering. During the three months ending September 30, 2023, we made payments of $138,876 on term notes and capital leases. Indebtedness In October 2021 we entered a $2,600,000 term loan with a commercial bank. In June 2023 we added a second term loan in the amount of $750,000. We secured a $250,000 line of credit from the same bank in October 2021 for working capital needs, which was increased to $500,000 in May 2022 and to $1,250,000 in June 2023. There were $500,000 in borrowings outstanding on the line of credit on September 30, 2024 and additional availability in the amount of $750,000. Our loan agreement contains a minimum annual debt service coverage ratio covenant of 1.2x, for the period ending June 30, 2024. We did not meet this annual debt service coverage ratio as of June 30, 2024. Our lender has agreed to waive compliance with the debt service ratio covenant for the period ending June 30, 2024. In addition to the waiver, we have entered into amendments dated September 30, 2024 with our lender to both term loans which provide for a six month period of interest only payments from October 15, 2024 through March 15, 2025. We will begin to pay principal and interest under the Notes beginning with the payments due on April 15, 2025, with a new amortization schedule for the remaining term for such Notes through their maturity date. There were no other changes to or modifications to the Loan Agreement or the Notes. On August 14. 2024 we entered into securities purchase agreements with institutional and accredited investors in addition to certain directors and officers of the Company for the purchase and sale of 265,868 shares of the Company’s common stock resulting in gross proceeds of approximately $1.4 million before deducting placement agent commissions and other estimated offering expenses. Net proceeds were $1,204,542. Capital equipment expenditures and additional patent costs during the three months ended September 30, 2024 and in the same period in the prior year were $28,099 and $43,517, respectively. 16 Contractual cash commitments for the fiscal periods subsequent to September 30, 2024, are summarized as follows: Fiscal 2025 Thereafter Total Capital lease for equipment, including interest $ 31,764 $ 28,004 $ 59,768 Minimum operating lease payments $ 137,950 $ 11,478 $ 149,428 We have contractual cash commitments related to open purchase orders as of September 30, 2024 of approximately $4,549,000. Off-Balance Sheet Arrangements We currently have no off-balance sheet arrangements that have, or are reasonably likely to have, a current or future material effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources. Item 3. Quantitative and Qualitative Disclosures About Market Risk. As a smaller reporting company, as defined by Rule 12b-2 of the Exchange Act and in Item 10(f)(1) of Regulation S-K, we are electing scaled disclosure reporting obligations and therefore are not required to provide the information requested by this Item.