Item 1. Business
ITEM 1. BUSINESS
Note – Information in this section is as of year end unless otherwise noted. The year end is December 31, 2022 unless additional years are included or noted.
Overview
Fastenal Company (together with our subsidiaries, hereinafter referred to as 'Fastenal' or the company or by terms such as we, our, or us) began as a partnership in 1967, and was incorporated under the laws of Minnesota in 1968. We opened our first branch in 1967 in Winona, Minnesota, a city with a population today of approximately 26,000. We began with a marketing strategy of supplying threaded fasteners to customers through a branch network in small, medium, and, in subsequent years, large cities. Over time, how and where we engage our customers has expanded and evolved. Today we sell a broader range of industrial and construction supplies spanning more than nine major product lines through a global network of in-market locations utilizing diverse technologies such as vending devices, bin stock devices, and eCommerce. The large majority of our transactions are business-to-business. We provide additional descriptions of our product lines and market channels later in this document. At the end of 2022, we had 3,306 in-market locations (defined in the table below) in 25 countries supported by 15 distribution centers in North America (12 in the United States, two in Canada, and one in Mexico), and one in Europe, and we employed 22,386 people. We believe our success can be attributed to the high quality of our employees and their convenient proximity to our customers, and our ability to offer customers a full range of products and services to reduce their total cost of procurement.
Our Channels to Market
We engage our customers primarily through branch and Onsite locations. Branches and Onsites exist very close to our customers, usually within miles in the case of the former and most often within or immediately proximate to our customers' physical locations in the case of the latter, and together constitute our 'in-market' network. Many of our customers engage with us through eCommerce, but in most cases these customers are utilizing eCommerce to supplement our service through our other channels.
The following table shows, as of the end of each of the last 10 fiscal years, our consolidated net sales; the number of branch, Onsite, and total in-market locations; their respective sales, as well as the average monthly sales per location that were generated from our branch and Onsite locations; and our revenue generated from non-traditional sources:
2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 (1)
Net sales $ 6,980.6 6,010.9 5,647.3 5,333.7 4,965.1 4,390.5 3,962.0 3,869.2 3,733.5 3,326.1
Branch locations 1,683 1,793 2,003 2,114 2,227 2,383 2,503 2,622 2,637 2,687
Branch revenue (2)
$ 4,161.6 3,726.2 3,587.1 3,660.1 3,625.8 3,399.6 3,198.1 3,281.8 3,225.3 —
Average monthly sales
per branch location (3)
$ 199.5 163.6 145.2 140.5 131.1 116.0 104.0 104.0 101.0 —
Onsite locations 1,623 1,416 1,265 1,114 894 605 401 264 214 —
Onsite revenue (2)
$ 2,465.5 1,898.0 1,485.6 1,391.7 1,081.7 770.2 569.2 454.3 387.7 —
Average monthly sales per Onsite location (3)
$ 135.2 118.0 104.1 115.5 120.3 127.6 142.7 158.4 157.6 —
Other revenue (4)
$ 353.5 386.7 574.6 281.9 257.6 220.7 194.7 133.1 120.5 —
Total in-market locations (5)
3,306 3,209 3,268 3,228 3,121 2,988 2,904 2,886 2,851 2,687
(1)
Onsite locations have existed since 1992; however, we did not specifically track their number until we identified our Onsite program as a growth driver in 2014. Therefore, Onsite, branch, and other revenue, and average monthly sales per location are intentionally omitted for 2013.
(2)
Revenues attributable to our traditional and international branch locations (both of which are defined below), and our Onsite locations, respectively.
(3)
Average sales per month considers the average active base of branches and Onsites, respectively, in the given year, factoring in the beginning and ending location count, divided by total revenues attributable to our branch and Onsite locations, further divided by 12 months, respectively. This information is presented in thousands.
2
Table of Contents
(4)
This portion of revenue is generated outside of our traditional in-market location presence, examples of which include revenues arising from our custom in-house manufacturing, industrial services, leased locker arrangements, and other non-traditional sources of revenue. In 2020, this included the effects of COVID-19, one response to which was substantial sales of pandemic-related products that were direct-shipped (versus sold through our in-market locations) as a means of delivering critical supplies more quickly.
(5)
'In-market locat ions' is defined as the sum of the total number of branch locations and the total number of Onsite locations.
This structure has evolved over time as a result of one of Fastenal's guiding principles since inception: that we can improve our service by getting closer to the customer. This has been achieved by opening branch locations and, more recently, Onsite locations. Today, we believe there are few companies that offer our North American in-market location coverage. In 2022, roughly 52% of our sales and 50% of our in-market locations were in major Metropolitan Statistical Areas (MSAs) (populations in the United States and Canada greater than 500,000 people), while 21% of our sales and 19% of our in-market locations were in small MSAs (populations under 500,000 people), and 27% of our sales and 31% of our in-market locations were not in an MSA. In our view, this has proven to be an efficient means of providing customers with a broad range of products and services on a timely basis. Maintaining operations that are physically proximate to our customers' operations have represented, and continue to represent, the foundation of our service approach.
We have two primary versions of our branch locations :
1) A 'traditional branch' typically services a wide variety of customers, including our larger national and regional accounts as well as retail customers. Locations are selected primarily based on their proximity to our distribution network, population statistics, and employment data for manufacturing and non-residential construction companies. We stock all branches with inventory drawn from all of our product lines, and over time, where appropriate, our district and branch personnel may tailor the inventory offering to the needs of the local customer base. Since Fastenal's founding and through 2013, traditional branch openings were a primary growth driver for the company, and we experienced net openings each year over that time span. However, new growth drivers, business models (Onsites), and business tools (digital solutions) have emerged and diminished the direct role of traditional branch openings in our growth. Traditional branches were entirely U.S.-based until 1994, when we opened our first location in Canada. At the end of 2022, we had 1,538 traditional branches in the United States and Canada, and they represented 55.0% of net sales.
Traditional branches are also differentiated by their operating styles. Certain locations are Customer Service Branches (CSBs), which tend to feature a showroom, regular hours during which they are open to the public, and our standard stocking model of products designed for contractors. CSBs are similar in function to a hardware store and they often conduct some business with non-account or retail-like customers. However, this customer set typically represents less than 10% of sales at this type of location. Other locations operate as Customer Fulfillment Centers (CFCs), which tend to feature a limited showroom, reduced hours of access to the public, greater usage of will-call, and stock customer-specific inventory. These tend to appear and function more like an industrial supply house and stocking location and tend not to have transactions with non-account or retail-like customers unless it is a will-call arrangement related to an online transaction. The choice of operating style is made by local leadership and is based on local market considerations. At the end of 2022, 20% of our traditional branches operated as a CSB and 80% operated as a CFC.
2) An 'international branch' is the format we typically deploy outside the United States and Canada. We first expanded outside of the United States and Canada when we opened a branch in Mexico in 2001. Since then, we have continued to expand our global footprint, and at the end of 2022, we operated in 23 countries outside of the United States and Canada. Mexico is the largest of these, and we also operate in Europe, Asia, and Central and South America. Our go-to-market strategy in countries outside of the United States and Canada focuses primarily on servicing large, national account customers disproportionately concentrated in manufacturing. From a product perspective, these customers are more heavily oriented toward planned fastener spend, though non-fastener manufacturing, repair, and operations (MRO) spend is becoming more common in these markets. Despite strong growth in our international business in recent years, we are not as well recognized in many of our locations outside of the U.S. and Canada as we are in the U.S. and Canada. However, our ability to provide a consistent service model, including vending, bin stocks, and Onsites, on a global basis is attractive to our customer base, much of which are the foreign operations of North American-based companies. At the end of 2022, we had 145 international branches operating outside the U.S. and Canada, and they represented 4.6% of net sales.
Traditional and international branches sell to multiple customers. We will continue to open traditional branches as the company sees fit. However, in each year since 2013, the company has experienced a net decline in its total branch count including net declines of 110 branches in 2022. Our total decline since 2013 is 1,004 branches.
3
Table of Contents
Onsite locations may influence the trend in our traditional branch count over time, but have not been the primary reason for our traditional branch closings. The Onsite concept is not new, in that we entered into the first such arrangement in 1992. However, it was largely a local option that grew slowly before we identified it as a growth driver in 2014. We have made substantial investments toward accelerating its traction in the marketplace since 2015. In this model, we provide dedicated sales and service to a single customer from a location that is physically within the customers' facility (or, in some cases, at a strategically placed off-site location), with inventory that is specific to the customers' needs. In many cases, we are shifting revenue with the customer from an existing branch location, though we are beginning to see more new customer opportunities arise as a result of our Onsite capabilities. The model is best suited for larger companies, though we believe we can provide a higher degree of service at a lower level of revenue than most of our competitors. It has been our experience that the sales mix at our Onsite locations produces a lower gross profit percentage than at our branch locations, but we gain revenue with the customer and our cost to serve is lower. We have identified over 12,000 manufacturing and construction customer locations in North America with potential to implement the Onsite service model. These include customers with which we have an existing national account relationship today, and potential customers we are aware of due to our local market presence with which we do not have a meaningful relationship today. However, as awareness of our capabilities has grown, we have identified additional Onsite potential with certain agencies of state, provincial, and local government customers, and academia. We also believe as we follow our existing national account customers outside the United States, our market potential for Onsite solutions will continue to expand. The international opportunity is substantial, but our speed is limited by our relatively underdeveloped infrastructure in comparison to the United States. We expect revenues from Onsite arrangements to increase meaningfully over time. We had 1,623 Onsite locations as of December 31, 2022, which represented 35.3% of net sales, and signed 356, 274, and 223 new O nsite locations (referred to herein as signings) in 2022, 2021, and 2020, respectively. We believe the marketplace can support 375 to 400 new Onsite signings annually. We did not achieve that level of signings in 2022, though we increased our signings substantially from the prior year and were just below our pre-pandemic signings in 2019. We also did not achieve that level of signings in 2021 or 2020, which we believe was due to certain market variables, including the ongoing COVID-19 pandemic, supply chain constraints, and labor shortages having created challenges in our ability to engage with key decision makers and caused many of our customers to focus on short-term crisis management rather than long-term strategic planning. Our goal for Onsite signings in 2023 is 375 to 400.
4
Table of Contents
The following table provides a summary of the branches and Onsite locations we operated at the end of each year, as well as the openings, closings, and conversions during each year:
North America Outside North America
United States (1)
Canada Mexico Subtotal Central & South America (2)
Asia (3)
Europe (4)
Subtotal Total
In-Market Locations - 12/31/20 (5)
2,752 260 140 3,152 20 31 65 116 3,268
Starting Branches 1,697 179 58 1,934 5 19 45 69 2,003
Opened Branches 3 — 5 8 — 1 1 2 10
Closed/Converted Branches (6)
(216) (6) — (222) — — 2 2 (220)
Ending Branches (5)
1,484 173 63 1,720 5 20 48 73 1,793
Starting Onsites 1,055 81 82 1,218 15 12 20 47 1,265
Opened Onsites 205 15 11 231 — 7 4 11 242
Closed/Converted Onsites (6)
(76) (7) (4) (87) — (2) (2) (4) (91)
Ending Onsites (5)
1,184 89 89 1,362 15 17 22 54 1,416
In-Market Locations - 12/31/21 (5)
2,668 262 152 3,082 20 37 70 127 3,209
Starting Branches 1,484 173 63 1,720 5 20 48 73 1,793
Opened Branches — 1 4 5 — 2 5 7 12
Closed/Converted Branches (6)
(115) (5) (1) (121) — — (1) (1) (122)
Ending Branches 1,369 169 66 1,604 5 22 52 79 1,683
Starting Onsites 1,184 89 89 1,362 15 17 22 54 1,416
Opened Onsites 248 21 23 292 1 6 7 14 306
Closed/Converted Onsites (6)
(94) (3) (1) (98) — — (1) (1) (99)
Ending Onsites 1,338 107 111 1,556 16 23 28 67 1,623
In-Market Locations - 12/31/22 2,707 276 177 3,160 21 45 80 146 3,306
(1)
Includes the United States, the Dominican Republic, Guam, and Puerto Rico.
(2)
Includes Panama, Brazil, and Chile.
(3)
Includes Singapore, China, Malaysia, and Thailand.
(4)
Includes the Netherlands, Hungary, the United Kingdom, Germany, the Czech Republic, Italy, Romania, Sweden, Poland, Austria, Switzerland, Ireland, Spain, France, and Belgium.
(5)
The United States includes the Dominican Republic, Guam, and Puerto Rico which were previously grouped with other geographical regions. Prior period figures in the above table may differ slightly from those previously disclosed due to this minor change in reporting.
(6)
The net impact of non-in-market locations or Onsite locations converted to branches, branches converted to Onsite locations or non-in-market locations, and closures of branches or Onsite locations.
We believe the profitability of our in-market locations is affected by the average revenue produced by each site. In any in-market location, certain costs related to growth are at least partly variable, such as employee-related expenses, while others, like rent and utility costs, tend to be fixed. As a result, it has been shown that as an in-market location increases its sales base over time, it typically will achieve a higher operating profit margin. This ability to increase our operating profit margin is influenced by: (1) general growth based on end market expansion and/or market share gains, (2) the age of the in-market location (new locations tend to be less profitable due to start-up costs and, in the case of a traditional branch, the time necessary to generate a customer base), and/or (3) rationalization actions, as in the past several years we have seen a net decline in our traditional branch base. There are many reasons why local or regional management might decide to close a location. Key customers may have migrated to a different part of the market, factories may have closed, our own supply chain capabilities in a market may have evolved to allow us to service some areas with fewer traditional branches, and/or our customers may have transitioned to our Onsite model. An Onsite location may also close because local or regional management determines that the business at the location is unlikely to scale sufficiently to justify our being on premise, in which case the relationship often reverts to being managed in a local traditional branch. The paths to higher operating profit margins are slightly different in a traditional branch versus an Onsite location, as the former will tend to have more fixed costs to leverage, while the latter will tend to have a
5
Table of Contents
smaller fixed cost burden but have greater leverage of its employee-related expenses. In the short term, the Onsite program can hurt the profitability of our existing branch network as it can pull established revenue away from an existing branch even as its fixed expenses are largely unchanged.
We utilize additional types of selling locations within our network, but these tend to be more specialized in nature and relatively few in number, comprising less than five percent of our total selling locations. We remain committed to a large, robust service network, including traditional branches; it r emains the indispensable foundation of our business. In any given year, it is difficult to predict whether our total branch count will rise or fall. How eve r, with the growth we anticipate in Onsite locations, we believe our total in-market locations will increase over time.
Our Business Tools
Fastenal Managed Inventory (FMI ® )
Over time, we have invested in and developed various technologies that allow us to put physical product closer to the point of use in a customer location, increase the visibility of a customer's supply chain (to the customer as well as our personnel), and/or improve the ability to monitor or control usage. While there are isolated exceptions, these technologies are not themselves channels to the market but rather are utilized by our branch and Onsite channels to enhance service to our customers. Collectively, these tools comprise our Fastenal Managed Inventory (FMI) Technology suite. We believe our fully integrated distribution network allows us to manage the supply chain for all sizes of customers. FMI programs tend to generate a higher frequency of business transactions and, coupled with our fully integrated distribution network, foster a strong relationship with customers.
Bin stock (FASTStock ℠ and FASTBin ® ) programs, where product is held in bins in a customer facility, are similar to our vending business in that it involves moving product closer to the point of customer use within their facilities. Such programs have existed in the industrial supply industry for a considerable time, with open bins being clustered in a racking system, each of which holds original equipment manufacturing (OEM) fasteners, MRO fasteners, and/or non-fastener products that are consumed in the customers' operations. Historically, these bins were simply plastic and metal containers that held product and were visually inspected by our customers or Fastenal personnel to determine replenishment need. These bins in some cases are organized and labeled into customer digital plan-o-grams, which we call FASTStock and allow for the scanning of product when product is at a minimum desired level. However, in 2019 we introduced our FASTBin technology. FASTBin is the evolution of FASTStock into a set of electronic inventory management solutions that automate process controls by providing 24/7 continuous inventory monitoring, real-time inventory visibility, and more efficient replenishment of bin stock parts. These technologies come in three forms: (1) scales that utilize a high-precision weight sensor system to measure the exact quantity on hand in real time, notifying Fastenal to replenish when inventory hits an established minimum; (2) infrared that uses infrared sensors lining individual bins to provide real-time visibility of approximate quantity and inventory values, notifying Fastenal to replenish when inventory hits an established minimum threshold; and (3) RFID, which is a Kanban system that utilizes RFID tags so that when an empty bin is removed from the rack and placed in a replenishment zone (also part of the same racking system) and a notification is sent to Fastenal to refill the order. These technologies provide superior monitoring capabilities and immediate visibility to consumption changes, allowing for a lean supply chain, reducing risk of stock-outs, and providing a more efficient labor model for both the customer and the supplier.
Industrial vending (FASTVend ® ) was introduced in 2008 to provide our customers with improved product monitoring and control. Benefits include reduced consumption, reduced purchase orders, reduced product handling, and 24-hour product availability. We believe our company has a market advantage by virtue of our extensive in-market network of inventory and local personnel. For these reasons, the initiative began to gain significant traction in 2011, and we finished 2022 with approximately 106,000 FASTVend non-weighted devices in the field, which excludes approximately 6,500 non-weighted vending devices that are part of a leased locker program with a specific retail customer. We believe industrial vending has proven its effectiveness in strengthening our relationships with customers and helped to streamline the supply chain where it has been utilized. We also believe there remains considerable room to grow our current installed base of devices before it begins to approach the number of units we believe the market can support. We estimate the market could support as many as 1.7 million vending units and, as a result, we anticipate continued growth in installed devices over time.
Our industrial vending portfolio consists of 20 different vending devices, with 16 of these being in either a helix or locker format. Our most utilized models include the helix-based FAST 5000 and our 12- and 18-door lockers; combined, these comprise approximately 67% of our installed base of devices. These are either configurable or are available in multiple configurations to accommodate the various sizes and forms of products that will be dispensed to match the unique needs of our customers. Target monthly revenues per device typically range from under $1,000 to in excess of $3,000, with our flagship FAST 5000 device having a targeted monthly throughput of $2,000.
6
Table of Contents
In 2020, we began to report 'Weighted FMI Device' signings and installations, which is the combined activity of FASTBin and FASTVend converted into a comparable unit of measure, or 'machine equivalent unit' (MEU). This conversion takes the targeted monthly throughput of each FMI device signed or installed and compares it to the $2,000 target monthly throughput of our FAST 5000 vending device. For example, an RFID enclosure, with target monthly revenue of $2,000 would be counted as '1.00' machine equivalent ($2,000/$2,000 = 1.00). An infrared bin, with target monthly revenue of $40, would be counted as '0.02' machine equivalent ($40/$2,000 = 0.02).
In 2023, we anticipate weighted FMI device signings to be in a range of 23,000 to 25,000 MEUs. Similar to Onsite, we did not achieve that level of signings in 2022, though we increased our signings substantially from the prior year and were just below our pre-pandemic signings in 2019. We also did not achieve that level of signings in 2021 or 2020, which we believe was due to certain market variables, including the ongoing COVID-19 pandemic, supply chain constraints, and labor shortages having created challenges in our ability to engage with key decision makers and caused many of our customers to focus on short-term crisis management rather than long-term strategic planning.
The table below summarizes the signings and installations of, and sales through, our FMI devices.
Twelve-month Period
2022 2021 Change
Weighted FASTBin/FASTVend signings (MEUs) 20,735 19,311 7.4 %
Signings per day 82 76
Weighted FASTBin/FASTVend installations (MEUs; end of period) 102,151 92,874 10.0 %
FASTStock sales $ 832.0 587.6 41.6 %
% of sales 11.8 % 9.7 %
FASTBin/FASTVend sales $ 1,755.3 1,353.7 29.7 %
% of sales 24.9 % 22.3 %
FMI sales $ 2,587.3 1,941.3 33.3 %
FMI daily sales $ 10.2 7.7 32.7 %
% of sales 36.7 % 32.0 %
Digital Solutions
We also invest in digital solutions that aim to deliver strategic value for our customers, leverage local inventory for same-day solutions, and provide efficient service. While there is a transactional element to our digital services, many of the solutions we invest in are intended to add value to customers by illuminating various elements of their supply chain. These solutions take many forms:
1) Transactional. Our transactional, or eCommerce, platforms (web verticals or integrated catalogs) provide a means for our customers to effectively and efficiently procure MRO and unplanned spend. One of our eCommerce solutions, Fastenal EXPRESS, guides our customers to products which are locally stocked, capitalizing on our existing location footprint, in order to provide same-day or early next-day service for online orders. This positions us to outperform what is most typically a 24- to 48-hour fulfillment expectation. While there is a retail component to our transactional digital services, most of the revenue attributable to this is with our traditional customer base, nearly all of which purchase digitally as a supplement to other channels and tools that it utilizes with Fastenal. We attribute the revenue generated from a customer location through our transactional platforms to the in-market location that traditionally services that customer location.
2) Digital Visibility. Certain of our digital capabilities are intended to produce operational efficiencies for our customers and ourselves and/or to deliver strategic value by illuminating customer supply chain operations. For instance, we have developed, and continue to develop, 'Mobility' applications, one example of which is our Vending App, which provides a number of benefits. It provides easy, real-time information pertaining to a customer's local inventory position within their point-of-use devices. It incorporates customer usage data to recommend optimized parts and quantity for specific devices, which improves customer inventories while reducing the risk of stock-outs. Moving our fulfillment process from a vending device-based keypad function to a tablet or scanning interaction improves the restock process (reduced risk of product outages), reducing time consumed (greater efficiency) while improving accuracy (improved quality assurance). We will continue to build out our suite of Mobility applications. Electronic Data Interchange (EDI), is the connectivity between our system and our customers' procurement systems – whether a direct integration into their Enterprise Resource Planning (ERP) system or through a third-party procurement network or marketplace. These solutions provide a system-to-system exchange of electronic procurement documents (such as purchase orders, advanced shipping notices, and invoices for direct and indirect spend). Our eProcurement Solutions provide a bridge between our FMI replenishment activity and our customers' procurement systems – creating an efficient, accurate and streamlined procure-to-pay (P2P) process. 'FAST 360°' acts as the bridge between our FMI footprint and
7
Table of Contents
a customer's view into our managed service model. FAST 360° surfaces data around these managed services as one central source of information as we manage our customers' OEM and MRO product lines. This is achieved through our FMI technologies providing locational data around our FASTStock, FASTBin, and FASTVend footprint, and FAST 360° being the means of surfacing that data and activities to our customers.
3) Analytics. We provide solutions-based digital platforms (e.g., web verticals or integrated catalogs) which leverage our existing strategic environment by creating a means of migrating online spend offline, which illuminates our supply chain capabilities. This is marketed under the 'FAST 360° Analytics' label, as it is an enterprise-centric extension of the digital visibility capabilities of FAST 360°. We bring value to our customers, as well as ourselves, by using these digital platforms and analytics to shift product from a 'non-sticky' transactional environment (which is online) to a 'sticky' strategic environment (which is our FMI programs). We create customer cost savings opportunities through this directive by lowering the total cost of ownership (TCO) as the objective is to shrink the unplanned (and traditionally high cost), purely transactional spend bucket.
Digital Footprint
Our d igital products and services are comprised of sales through FMI (FASTStock, FASTBin, and FASTVend) plus that proportion of our eCommerce sale s that do not represent billings of FMI services (collectively, our Digital Footprint). We believe the data that is created through our digital capabilities enhances product visibility, traceability, and control that reduces risk in operations and creates ordering and fulfillment efficiencies for both ourselves and our customers. As a result, we believe our opportunity to grow our business will be enhanced through the continued development and expansion of our digital capabilities. Our Digital Footprint represented 49.3% of sales in 2022.
We believe our integrated physical and virtual model, when paired with our national (and increasingly international) scope, represents a unique capability in industrial distribution when compared to eCommerce as an independent sales channel. We expect to continue to build out and develop our digital solutions over time. Our greatest opportunity lies with the deployment of efficient and effective supply chain programs. We are focused on addressing the four key components of people, products, processes, and technology to support this model.
We believe our global channels to market and business tools, including those that we consider to be growth drivers (Onsites, international expansion, FMI, and digital solutions), represent alternative means to address the requirements of certain customer groups. These means get us closer to the customer and to where the product is actually consumed. This is consistent with our strategy and offers significant value by providing differentiated and 'sticky' service. Combined with ongoing strategic investments in end market initiatives as well as selling (in-market and otherwise) and non-selling (engineering, product specialists, manufacturing, etc.) employees, we offer a range of capabilities that are difficult for large and small competitors to replicate.
Distribution Network
We operate 15 regional distribution centers in North America; 12 of which are in the United States – Minnesota, Indiana, Ohio, Pennsylvania, Texas, Georgia, Washington, California, Utah, North Carolina, Kansas, and Mississippi – and three are outside the United States – Ontario, Canada; Alberta, Canada; and Nuevo Leon, Mexico. We also operate one distribution center in Europe, located in Dordrecht, Netherlands. These distribution centers give us approximately 4.9 million square feet of distribution capacity. These distribution centers are located so as to permit deliveries of two to five times per week to our in-market locations using our trucks and overnight delivery by surface common carrier, with approximately 80% of our North American in-market locations receiving service four to five times per week. The distribution centers in Indiana and Kansas also serve as 'master' hubs, with those in California and North Carolina serving as 'secondary' hubs to support the needs of the in-market locations in their geographic regions as well as to provide a broader selection of products for the in-market locations serviced by the other distribution centers.
We currently operate our Minnesota, Indiana, Ohio, Pennsylvania, Texas, Georgia, Washington, California, North Carolina, Kansas, and Ontario, Canada distribution centers with automated storage and retrieval systems (ASRS). These 11 distribution centers operate with greater speed and efficiency, and currently handle approximately 94% of our picking activity. We expect to invest in additional automation technologies, expand existing distribution facilities, and/or add new distribution centers over time as our scale and the number of our in-market locations increases.
In 2018, we began to deploy Local Inventory Fulfillment Terminals (LIFTs), which were once small distribution facilities situated where we had a dense population of FMI devices. However, today, we have shifted our focus to position them into our existing distribution centers. Traditionally, responsibility for product fulfillment to vending devices and bin stocks had centered on individual branch and Onsite locations, which were responsible for stocking and packaging inventory, delivering to a customer's location, and refilling the customer's devices. As our sales from FMI devices have grown, this approach has resulted in redundant inventory in a territory and a greater proportion of our sales personnel's time being spent on non-sales activities. By centralizing inventory and packaging into a LIFT and relying on dedicated LIFT fulfillment personnel for delivery and device replenishment, which we refer to as 'drop-and-scatter', we can reduce FMI-dedicated inventory, provide more consistent
8
Table of Contents
and predictable service to our customer's FMI devices, and free up time for our sales personnel to focus on customer penetration and acquisition. Our transportation network allows us to expand the geographic reach of our LIFTs by deploying a 'drop-and-deliver' model. In this model, a LIFT is responsible for stocking and packaging, with the inventory and accuracy benefits that come with that focus, but the delivery and replenishment continues to be performed by local branch personnel. In 2022, approximately 5% of our FMI revenue was serviced through a LIFT, but over time we believe this figure can approximate 40% of our FMI revenue.
Information Systems
Our Information Systems teams develop, implement, secure, and maintain the computer-based technology used to support business functions within Fastenal. Corporate, digital, distribution center, and vending systems are primarily supported from central locations, while each selling location uses a locally installed Point-Of-Sale (POS) system. The systems consist of custom in-house developed, purchased, and subscription licensed software. A dedicated Wide Area Network (WAN) is used to provide connectivity between systems and authorized users.
Trademarks and Service Marks
We conduct business under various trademarks and service marks, and we utilize a variety of designs and tag lines in connection with each of these marks, including Where Industry Meets Innovation ™ . Although we do not believe our operations are substantially dependent upon any of our trademarks or service marks, we consider the 'Fastenal' name and our other trademarks and service marks to be valuable to our business. We have registered, or applied for the registration of, various trademarks and service marks. Our registered trademarks and service marks are presumed valid in the United States as long as they are in use, their registrations are properly maintained, and they have not been found to have become generic. Registrations of trademarks and service marks can also generally be renewed indefinitely as long as the trademarks and service marks are in use.
Products
Fastenal was founded as a distributor of fasteners and related industrial and construction supplies. This includes threaded fasteners, bolts, nuts, screws, studs, and related washers, as well as miscellaneous supplies and hardware, such as pins, machinery keys, concrete anchors, metal framing systems, wire rope, strut, rivets, and related accessories. Our fastener product line, which is primarily sold under the Fastenal product name, represented 34.0% of our consolidated sales in 2022.
Fastener distribution is complex. In most cases, the product has low per unit value but high per unit weight. This presents challenges in moving product from suppliers, most of whom are outside of North America, to our distribution centers, as well as from our distribution centers to our branch, Onsite, and customer locations. At the same time, fasteners are ubiquitous in manufactured products, construction projects, and maintenance and repair while also exhibiting great geometric variability based on use and application. In many cases, a fastener is a critical part in machine uptime and/or effective use. These features have greatly influenced our logistical development, training and educational programs, support capabilities, and inventory decisions, which we believe would be difficult for competitors to replicate.
In 1993, we began to aggressively add additional product lines, and these represented 66.0% of our consolidated sales in 2022. These products, which we refer to as non-fastener product lines, tend to move through the same distribution channel, get used by the same customers, and utilize the same logistical capabilities as the original fastener product line. This logic is as true today as it was when we first began to diversify our product offering. However, over time, the supply chain for these product lines has evolved in ways independent of the fastener line. For instance, non-fastener product lines benefit disproportionately from our development of industrial vending.
The most significant category of non-fastener products is our safety supplies product line, which accounted for 20.8% of our consolidated sales in 2022. This product line has enjoyed dramatic sales growth in the last 10 years, which we believe is directly attributable to our success cross-selling safety supplies to customers that utilize us for non-safety products as well as our ability to market, deploy, and service industrial vending over that period. We expect these variables to remain the primary drivers of performance for our safety supplies product line.
In the last several decades, we have added 'private label' brands (often referred to as 'Exclusive Brands', or brands sold exclusively through Fastenal) to our non-fastener offering. These private label brands represented approximately 13% of our consolidated sales in 2022. We believe it is also appropriate to think about our private label sales as a percentage of our non-fastener sales for two reasons: (1) there is not a well-defined branded versus private label dynamic in fasteners as there is in non-fasteners; and (2) non-fastener data is more comparable to information reported by our peers, who do not generally have our significant mix of fastener business. Private label brand sales represented approximately 20% of our total non-fastener sales in 2022. Over time we expect our private label sales as a percentage of our total non-fastener sales to increase, although oftentimes, these increases through specific channels are masked by the relative sales growth we experience with Onsite locations, which typically have a lower percentage of total sales of private label than in branches or sales through vending devices.
9
Table of Contents
We plan to continue to add other product lines in the future.
Detailed information about our sales by product line is provided in Note 2 of the N otes to Co nsolidated Financial Statements included later in this Form 10-K. Each product line may contain multiple product categories.
Inventory Control
Our inventory stocking levels are determined using our computer systems, by our sales personnel at in-market locations, by our district and regional leadership, and by our product development team. The data used for this determination is derived from sales activity from all of our selling locations, from individual selling locations, and from different geographic areas. It is also derived from supplier information and from customer demographic information. The computer system monitors the inventory level for all stock items and triggers replenishment, or prompts a buyer to purchase, as necessary, based on an established minimum-maximum stocking level. In the past we have utilized a base inventory model for all of our branches, and such a model still exists in a smaller subset of our locations. Increasingly, however, branches primarily stock inventory that is deemed to be appropriate by the district and branch personnel to service the customers within their selling territory. Similarly, non-branch selling locations (primarily Onsites) stock inventory exclusively based on customer-specific arrangements. Inventories in distribution centers are established from computerized data for the selling locations served by the respective distribution center. Inventory quantities are continuously re-balanced utilizing an automated transfer mechanism we call 'inventory re-distribution'.
Inventory held at our selling locations, close to customers and available on a same-day basis, accounted for approximately 58% of our total inventory at the end of 2022. Inventory held at our distribution centers and manufacturing locations accounted for approximately 42% of our total inventory at the end of 2022. The distribution center and manufacturing location inventory, when combined with our trucking network, allows for fast, next-day service at a very competitive cost.
Manufacturing and Support Services Operations
In 2022, a pproximately 96% of our consolidated net sales were attributable to products manufactured by other companies to industry standards or to customer specific requirements. The remaining 4% relate d to products manufactured, modified, or repaired by our manufacturing businesses or our support services. The manufactured products consist primarily of non-standard sizes of threaded fasteners and hardware made to customers' specifications at one of our nine manufacturing locations, or standard sizes manufactured under our Holo-Krome ® , Cardinal Fasteners ® , and Spensall ® product lines. The services provided by the support services group include, but are not limited to, tool and hoist repair, chain sling and hose fabrication, band saw blade welding, and other light manufacturing and fabrication. We may add additional services in the future. However, we engage in these activities primarily as a service to our customers and expect the services to continue to contribute in the range of 4% to 6% of our consolidated net sales in the future.
Sources of Supply
We use a large number of suppliers for the standard stock items we distribute. Most items distributed by our network can be purchased from several sources, although preferred sourcing is used for some stock items to facilitate quality control. During 2022, we had a single supplier that accounted for 5% of our inventory purchases, whereas all remaining suppliers fell below that threshold.
In the case of fasteners and our private label non-fastener products, we have a large number of suppliers but these suppliers are heavily concentrated in a single geographic area, Asia. Within Asia, suppliers in China and Taiwan represent a significant source of product. Further, in many cases where we source directly from a North American supplier, the original country of origin of the acquired parts is the supplier's Asian facilities. As a result, the cost and effectiveness of our supply chain is dependent on relatively unfettered trade across geographic regions.
Beyond inventory, we have some concentration of purchasing activity. For example, we utilize a limited number of suppliers for our distribution equipment and our vehicle fleet, and primarily one supplier for our industrial vending equipment. However, we believe there are viable alternatives to each of these, if necessary.
Customers and Marketing
We believe our success can be attributed to our ability to offer customers a full line of quality products, our convenient locations and diverse methods of providing those products, and the superior service orientation and expertise of our employees. Most of our customers are in the manufacturing and non-residential construction markets. The manufacturing market includes both OEM and MRO customers and represents approximately 70% of our business. The non-residential construction market includes general, electrical, plumbing, sheet metal, and road contractors and represents approximately 10% of our business. Other users of our products include farmers, truckers, railroads, oil exploration companies, oil production and refinement companies, mining companies, federal, state, and local governmental entities, schools, and certain retail trades.
10
Table of Contents
Based on our customer profile being oriented toward manufacturing and non-residential construction, our business has historically been cyclical. However, we believe our model has certain features that moderate the volatility of our results around cyclical changes. First, we have a large number of customers that serve a wide range of segments within the broader manufacturing and non-residential construction market. While slumps in one industry served by us can rapidly spread to other, interrelated industries, locally or globally, we still believe this customer and market segment diversity provides some insulation from economic changes that are not across multiple industries and geographic regions. Second, while a meaningful part of our revenue is derived from products that are incorporated into final products, we also have a significant portion of revenue that is derived from products used to maintain facilities. This latter source of revenue tends to be directly influenced by cyclical changes, but its rate of change tends to be less dramatic.
Our national accounts program is aimed at creating contractual partnerships that are dedicated to curating supply chain solutions in the OEM and MRO space. These contractual programs are intended for multi-site companies and are created to drive value in the form of greater efficiency and productivity for them. The scale and scope of the OEM and MRO products that these companies need to manage is very complex and costly. We believe that our broad product offering coupled with our ability to execute and curate a dedicated service model for each of their sites provides us with a unique advantage and allows us to provide them with a total cost of ownership benefit.
Additionally, our local presence as part of a national, and increasingly international, footprint, our ability to provide a consistent level of high-touch service, and our ancillary capabilities around manufacturing, quality control, and product knowledge, are attractive to these multi-site customers. We believe our advantage with these customers has only been strengthened as we have added other channels, such as Onsite, FMI, digital solutions, and resources to serve these customers' unique demands. As a result, in 2022, national accounts represented 57.8% of our consolidated sales, compared to 56.6% and 55.0% in 2021 and 2020, respectively. We believe sales to national accounts customers will continue to increase as a percentage of our total sales over time.
In an in-market location, we track our customers' business activity through 'active accounts', which is defined as any customer account with purchase activity of at least $100 per month. Customers often have more than one active account at a single in-market location, reflecting their utilization of different Fastenal services, and frequently have active accounts at many in-market locations across our global network. In 202 2, we averaged 119,583 active accounts per month and approximately 99.2% of the sales in our in-market locations are derived from our active accounts (the remainder was from walk-in or infrequent, non-account, and small account customers). Traditionally, our in-market locations, which until recently consisted primarily of traditional and international branches, prioritized acquiring additional active accounts and expanding the products and services sold to new and existing active accounts as a means of growing sales. Over time it became clear that the pursuit of smaller accounts consumed significant organizational energy and the large majority of new active accounts did not meaningfully increase in size. Since 2020, our in-market locations have prioritized ‘key accounts’, which is defined as any customer account with purchase activity of at least $2,000 per month. Key account customers have typically been able to utilize a wider range of our products and services, and as a result have exhibited greater potential to increase in size while being more efficient to pursue and support. We also believe we can provide better and more efficient service to these customers. In 2022, we averaged 39,151 key accounts per month and approximately 90.8% of the sales in our in-market locations are derived from our key accounts.
2022 2021 2020 2019 2018 2017
Active Accounts 119,583 130,020 137,380 152,491 156,069 156,464
Key Accounts 39,151 36,190 33,794 34,621 32,895 30,040
During 2022, no single customer represented 5% or more of our consolidated sales.
Direct marketing continues to be the backbone of our business through our local in-market selling personnel, as well as our non-branch selling personnel. We support our sales team with multi-channel marketing including direct mail and digital marketing, print and rad io advertising, targeted campaigns, promotional flyers, and events. In recent years, our national advertising has been focused on a NASCAR® sponsorship through our partnership with Roush Fenway Keselowski Racing® as the primary sponsor of the No. 17 car in the NASCAR® Cup Series, driven by Chris Buescher. In 2020, our sports marketing efforts were extended when the National Hockey League (NHL®) awarded us as the preferred MRO supplier of the sport.
Seasonality
Seasonality has some impact on our sales. The first and fourth quarters of each year are typically our lowest volume periods, given their overlap with winter months in North America during which our direct and indirect sales to customers in the non-residential construction market typically slow due to inclement weather. The fourth quarter also tends to be more greatly affected by the Thanksgiving (October in Canada and November in the United States), Christmas, and New Year holiday periods, due to plant shut downs. In contrast, the second and third quarters of each year typically have higher revenues due to
11
Table of Contents
stronger non-residential construction activity and relatively fewer holidays (although Good Friday will sometimes fall in the second quarter and the 4th of July will always fall in the third quarter).
Competition
Our business is highly competitive and includes large national distributors whose strongest presence tends to be in more densely populated areas, and smaller regional or local distributors, which compete in many of the smaller markets in which we have branches. We believe the principal competitive factors affecting the markets for our products, in no particular order, are customer service, price, convenience, product availability, and cost saving solutions.
Market strategies in industrial distribution are varied. With respect to products, many of the larger distributors have trended toward a broad-line offering over time; however, they are often still closely associated with a specific product that can influence their ability to capture market share. This association with a specific product line is often even more pronounced among smaller competitors, though many smaller competitors do deploy a broad-line model. Means of serving the customer are even more diverse. For instance, many competitors maintain a local, branch-based presence in their markets, while others use vans to sell products in markets away from their main warehouses, while still others rely on catalogs or telemarketing sales. Recent years have seen the emergence of eCommerce solutions, such as websites, and while this channel has been embraced by many traditional distributors, it also has introduced non-traditional web-based competitors into the marketplace. The diversity of product and service models supported in the marketplace is a reflection of the equally diverse product and service needs of the customer base. The large majority of our customers utilize multiple channels, from a single distributor or a range of distributors, to procure the products they need in their operations.
We believe that better service, and a competitive selling advantage, can be provided by maintaining a physical selling and stocking presence closer to the customers' location(s). As a result, we maintain branches in small, medium, and large markets, each offering a wide variety of products. The convenience of a large number of branches in a given area, combined with our ability to provide frequent deliveries to such branches from centrally located distribution centers, facilitates the prompt and efficient distribution of products. We also believe our FMI solutions, supported by an in-market location, provide a unique way to provide our customers convenient access to products and cost saving solutions using a business model not easily replicated by our competitors. Having trained personnel at each in-market location also enhances our ability to compete (see 'Employees' below).
Our Onsite service model provides us with a strategic advantage with our larger customers. Building on our core business strategy of the local branch, the Onsite model provides value to our customers through customized service while giving us a competitive advantage through stronger relationships with those customers, all with a relatively low incremental investment given the existing branch and distribution structure.
Human Capital Resources
Employees
At the end of 2022, we employed 22,386 full and part-time employees. Of these, approximately 71% held an in-market or non-branch selling role. We characterize these personnel as follows:
2022 % of Total 2021 % of Total
In-market locations (branches & Onsites) 13,410 59.9 % 12,464 60.8 %
Non-in-market selling (1)
2,488 11.1 % 2,106 10.3 %
Selling subtotal 15,898 71.0 % 14,570 71.0 %
Distribution/Transportation 3,974 17.8 % 3,675 17.9 %
Manufacturing 733 3.3 % 649 3.2 %
Organizational support personnel (2)
1,781 8.0 % 1,613 7.9 %
Non-selling subtotal 6,488 29.0 % 5,937 29.0 %
Total 22,386 100.0 % 20,507 100.0 %
(1)
Our non-in-market selling employee count has grown in recent years due to an increased focus on resources to support our growth drivers, particularly Onsite and national account growth.
(2)
Organizational support personnel consists of: (1) Sales & Growth Driver Support personnel (35% to 40% of category), which includes sourcing, purchasing, supply chain, product development, etc.; (2) Information Technology personnel (30% to 35% of category); and (3) Administrative Support personnel (25% to 30% of category), which includes human resources, Fastenal School of Business, accounting and finance, senior management, etc.
12
Table of Contents
Employee Profile
As of December 31, 2022, we had 22,386 employees worldwide, with 17,919 of those employees located in the United States (U.S.), 2,898 employees located in Canada and Mexico, and 1,569 employees located overseas in 22 other countries throughout the world.
Based on our EEO-1 data for 2021, which is the most recent period for which data is available and our most recently filed information, in the U.S., females and minorities constitute 24.2% and 21.0% of our workforce, respectively. Based on U.S. Bureau of Labor Statistics data, we believe Fastenal's mix of female and minority employees is generally consistent with the proportion of females and minorities working in manufacturing and construction, which is representative of the pool of employees from which we might draw candidates. The proportion of females in our workforce declined slightly in 2021. This occurred in the broader manufacturing sector as well and likely reflected a larger trend: much of the impact of the severe social disruption caused by COVID-19 has fallen on women and mothers in our society, and that impact has been slow to reverse. Generally, though, we believe this data is best viewed over time rather than year-to-year. On this basis, there is a clear trend toward greater diversity in our business. In the nine years since 2012, our female and minority workforces have grown 2.8x and 4.2x faster, respectively, than our overall U.S. workforce. This trend reflects multiple dynamics in our business evolution, including the natural progression of our geographic expansion, the cycle of our promote-from-within philosophy, and efforts to improve hiring processes over time.
Health and Safety
Employee health and safety continues to be a priority in every aspect of our business. We have taken a multi-faceted approach to safety that helps us understand and reduce hazards in our business. Today, our health and safety programs span all operations including manufacturing, distribution centers, fleet and auto, and our branch network. These key business units play a dynamic role in defining how we engage with our employees on health and safety. Trainings, audits, inspections, risk assessments, safety coaching, and employee engagement are all programs that help us consistently manage our facility and employee safety. In 2022, there were over 199,000 completed health and safety programs, which is an increase of 30% compared to 2021. Our internal scorecard system and safety management system ensures we maintain focus on a variety of risks while we sustain an inclusive safety environment that contributes to innovation and improved performance. We continue to expand and evolve our safety programs to better meet our employee needs and workplace conditions as our business grows.
This commitment to, and continuous improvement toward, a safer work environment for our employees has generated excellent results. A widely accepted measure of organizational health and safety is the Experience Modification Rate (EMR). An organization's EMR is established through the comparison of a company's past and expected losses incurred through workplace injury against industry averages, which are compiled by the National Council on Compensation Insurance and consider unique variables such as the size and characteristics of an organization. Industry averages are benchmarked at a 1.00 EMR, with a reduction in the rate being reflective of an organization's ability to implement superior safety procedures and protocols, resulting in a safer environment and reducing both personnel and financial risk. In 2022, the most recent year for which this figure has been calculated, Fastenal had an EMR of 0.52, which is 48% better than the average performance rate for our industry.
In 2022, we achieved third-party certification for the 45001 Occupational Health and Safety Management System. This certification illustrates the strength of our health and safety programs, as well as our commitment to continual improvement to better support our growing workforce. As our business model continues to grow through our branch and Onsite network, our customer critical programs have evolved to mitigate risk and incidents, while meeting customer specific needs. This partnership with our customers allows us to collaborate and expand our health and safety programs to improve our business and our customers.
Employment and Compensation Philosophy
Fastenal's success is defined by our people. Our cultural values – Ambition , Integrity , Innovation, and Teamwork – are woven into the fabric of our human resources processes and protocols, and inform our employment and compensation philosophies.
Several principles underpin our employment philosophy. One principle is decentralization: placing employees close to our customers' operations and trusting these employees to independently make local decisions to provide differentiated local service. A second principle is that we are a passionately promote-from-within company, guided by a belief that if you work hard, make great decisions, learn from mistakes, and exemplify our cultural values, you should receive greater opportunity and responsibility. We believe these principles cultivate an entrepreneurial mindset and foster an environment of trust and empowerment.
13
Table of Contents
As it relates to our compensation philosophy, we believe our combination and mix of base and bonus pay motivates our people to high levels of individual and company success, as the goals and objectives have been repeatedly demonstrated to be achievable with superior effort. We are guided by simple principles. First, compensation programs should be easy to understand, with goals and objectives that are clearly communicated and resources for success that are provided. They should be calculable by the employee and numbers-driven (e.g., not subjective). Second, total compensation should have a significant component that is based on how well the employee has grown their piece of the business and served our customers. Third, employees should receive incentives as soon as practical upon attainment of the goal.
Approximately 71% of our employees interface directly with customers on a daily or frequent basis, with the remainder supporting the selling efforts of our customer-facing employees. Typical pay arrangements provide a base amount paid periodically during the month, along with a major opportunity to earn bonus amounts, paid monthly, based on growth in sales, gross or pre-tax profit achieved, and prudent management of working capital. In certain roles, there may also be a portion of compensation based on contribution to attaining predetermined departmental or project and cost containment goals, most of which are focused on either customer service or better execution of company-wide activities.
Because we believe the growth in the company's stock value should be the reward for achieving long-term success consistent with being an owner, we have a stock option plan. In the case of certain foreign employees, we have a stock appreciation rights plan. All of our employees are eligible to receive stock option grants or stock appreciation rights.
We believe our combination of short- and long-term rewards and incentives has proven successful as reflected in our historic performance and levels of employee retention and turnover.
Our employees are not subject to any collective bargaining agreements, and we have experienced no work stoppages. We believe our employee relations are good.
Talent Acquisition and Development
Fastenal's values are integral to our employment process and serve as guideposts for leadership. The ultimate goal is straightforward: find great people, ask them to join, and give them a reason to stay. Reasons to stay include training, opportunity, and a welcoming environment. From a practical standpoint, this means that we attract a broad group of candidates and then hire the candidate who is the best match for the position based on their skills and abilities. In accordance with our decentralized leadership structure, we believe the person best suited to make this decision is the local leader trying to fill the opening. In light of our promote-from-within philosophy, we know we are hiring a potential future leader with every new hire.
Our Human Resources department develops efficient processes to expand our reach and pool of diverse talent while balancing the needs and requirements of data collection and storage. We have created a standardized framework for posting jobs and interviewing for positions, supplemented with training through the Fastenal School of Business (FSB). We have a Diversity and Compliance team that is heavily involved in developing this standardized framework, which ensures its integrity. Not only is this process followed for all new hires, we replicate the same procedures for any internal transfers and promotions.
The FSB (our internal corporate university program) develops and delivers a comprehensive array of industry and company-specific training and development programs that are offered to our employees. The programs are offered through a combination of classroom instructor-led training, virtual instructor-led training, and online learning. FSB provides core curricula focused on key competencies determined to be critical to the success of our employees' performance. In addition, we provide specialized educational tracks within various institutes of learning, as well as training plans based on roles within the company. These institutes of learning are advanced levels that provide specific concentrations of education and development and have been designed to focus on critical aspects of our business, such as leadership, effective branch best practices, sales and marketing, products, supply chain, and distribution.
Product Sourcing Endeavors
Sourcing from suppliers with good standing is the foundation of an ethical supply chain. We expect our suppliers to comply with all regulations and standards, and we conduct risk analysis for suppliers who want to do business with us and require them to provide additional supporting documentation affirming their ethics, quality, and reliability, so we can be certain they meet our standards in these areas and to ensure that they are complying with Fastenal's Global Supplier Purchase Order Terms & Conditions and Supplier Code of Conduct. Utilizing third-party tools and global databases, Fastenal scans and monitors over 1,000 sanction listings and over 500 other official and/or exclusion lists that provide information on any known risk, adverse media, and financial status of our suppliers. Additionally, we monitor key areas of trade-related risk, including dual-use goods and utilization of sanctioned countries (or entities), as these are common ways that international trade might provide capital and restricted goods to sanctioned parties, launder funds of drug traffickers, and otherwise support criminals. We also evaluate our suppliers' approach to labor to ensure that they are using appropriate, and appropriately compensated, employees.
14
Table of Contents
With a local and global supplier base, continuous monitoring and local representation is a necessity to ensure protocols are triggered when risk may be evident, ensuring a safeguard against poor and/or impaired quality and regulatory violations that may otherwise impact our reputation in the marketplace. This is performed not only at the time of supplier vetting and onboarding, but for the life of the relationship with the supplier. This process promotes a supply chain that is supportive of Fastenal's Global Supplier Purchase Order Terms & Conditions and Supplier Code of Conduct. In the event of non-compliance or potential risk, we work with the supplier to correct the situation. If remediation efforts are not undertaken to ensure the supplier remains in compliance with Fastenal's standards and code of conduct, alternative sources for supply may be considered to ensure the integrity of our supply chain. Supply chain compliance representatives are placed in international corporate offices to ensure global coverage and governance, ensuring that no matter where a customers' operations may take them, Fastenal has the infrastructure, resources, and internal processes established to perform its supply chain governance obligations.
In 2022, approximately 33% of our total company-wide inventory spend was with small and/or diverse businesses. This flows from our Supplier Diversity program, as part of which we are committed to building supply chain relationships with small businesses and businesses with diverse ownership including women, minorities, veterans, and lesbian, gay, bisexual, and transgender (LGBT) owned Certified LGBT Business Enterprise ® Suppliers.
Available Information
Our Internet address for corporate and investor information is www.fastenal.com. The information contained on our website or connected to our website is not incorporated by reference into this annual report on Form 10-K and should not be considered part of this report.
Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act are available free of charge on or through our website at www.fastenal.com as soon as reasonably practicable after such reports have been filed with or furnished to the SEC.
15
Table of Contents