Item 1. Business
Item 1.
Business
Overview
We supply advanced, innovative capital equipment developed for the global semiconductor industry. Fabricators of advanced integrated circuits, or chips, can use our wet-cleaning and other
front-end processing tools in numerous steps to improve product yield, even at increasingly advanced process nodes. We have designed these tools for use in fabricating foundry, logic and memory chips, including dynamic random-access memory, or
DRAM, 3D NAND-flash memory chips, and compound semiconductor chips. We also develop, manufacture and sell a range of advanced packaging tools to wafer assembly and packaging customers.
Revenue from wet cleaning and other front-end processing tools totaled $202.3 million, or 77.9% of total revenue in 2021, $136.3 million,
or 87.0% of total revenue in 2020; and $90.9 million, or 84.6% of total revenue, in 2019. Selling prices for our wet-cleaning production tools range from more than $1 million to more than $5 million. Our customers for wet-cleaning and other
front-end processing tools have included Huali Microelectronics Corporation, The Huahong Group, Semiconductor Manufacturing International Corporation, or SMIC, Shanghai SK Hynix Inc., Yangtze Memory Technologies Co., Ltd, and ChangXin Memory
Technologies.
Revenue from advanced packaging, other processing tools, services and spares totaled $57.5 million, or 22.1% of total revenue in 2021; $20.4 million, or 13.0% of total revenue in 2020; and
$16.6 million, or 15.4% of total revenue in 2019. Selling prices for these tools range from $0.5 million to more than $4 million. Our customers for advanced packaging, and other processing tools have included Jiangyin Changdian Advanced Packaging
Co. Ltd., a leading PRC-based wafer bumping packaging house that is a subsidiary of JCET Group Co., Ltd.; Nantong Tongfu Microelectronics Co., Ltd., a PRC-based chip assembly and testing company that is a subsidiary of Nantong Fujitsu
Microelectronics Co., Ltd.; Nepes Co., Ltd., a semiconductor packaging company based in South Korea which acquired the operations of Deca Technologies’ Philippines manufacturing facility in 2020; and Wafer Works Corporation, a leading PRC-based
wafer supplier.
We estimate, based on third-party reports and on customer and other information, that our current product portfolio addresses approximately $8 billion of the global wafer equipment market. By
product line, we estimate an approximately $3.7 billion market opportunity is addressed by our wafer cleaning equipment, $2.9 billion by our furnace equipment, $730 million by our electro-chemical plating or ECP equipment, and more than $650
million by our stress-free polishing, advanced packaging, wafer processing, and other processing equipment. By major equipment segment, Gartner estimates a 2021 worldwide semiconductor wafer fab equipment WFE market size of $88.1 billion, of which
$4.1 billion is for wafer cleaning equipment (auto wet stations, single-wafer spray processors, batch spray processors, and other clean process equipment), $3.4 billion is for furnace equipment (tube CVD, oxidation/diffusion furnace, and batch
atomic layer deposition), and $764 million is for ECD (electro-chemical deposition). Based on Gartner’s estimates, total available global market for these equipment segments increased by 30.1% from $6.4 billion in 2020 to $8.3 billion in 2021, and
is expected to increase by 8.3% to $8.9 billion in 2022. These segments are part of the worldwide semiconductor WFE market, which based on Gartner’s estimates increased by 35.6% from $64.9 billion in 2020 to $88.1 billion in 2021, and is expected
to increase by 10.7% to $97.5 billion in 2022.
We have focused our selling efforts on establishing a referenceable base of leading foundry, logic and memory chip makers, whose use of our products can influence
decisions by other manufacturers. We believe this customer base has helped us penetrate the mature chip manufacturing markets and build credibility with additional industry leaders. We have used a “demo-to-sales” process to place evaluation
equipment, or “first tools,” with a number of selected customers.
4
Table of Contents
Since 2009 we have delivered more than 225 wet cleaning and other front-end processing tools, more than 185 of which have been accepted by customers and thereby generated revenue to us. The
balance of the delivered tools are awaiting customer acceptance should contractual conditions be met. To date, a substantial majority of our sales of single-wafer wet cleaning equipment for front-end manufacturing have been to customers located in
Asia, and we anticipate that a substantial majority of our revenue from these products will continue to come from customers located in this region for the foreseeable future. We have begun to add to our efforts to further address customers in North
America, Western Europe and Southeast Asia by expanding our direct sales and services teams and increasing our global marketing activities.
We are focused on building a strategic portfolio of intellectual property to support and protect our key innovations. Our tools have been developed using our key proprietary technologies:
●
Space Alternated Phase Shift, or SAPS, technology for flat and patterned (deep via or deep trench with stronger structure) wafer surfaces. SAPS technology employs
alternating phases of megasonic waves to deliver megasonic energy in a highly uniform manner on a microscopic level. We have shown SAPS technology to be more effective than conventional megasonic and jet spray technologies in removing
random defects across an entire wafer, with increasing relative effectiveness at more advanced production nodes.
●
Timely Energized Bubble Oscillation, or TEBO, technology for patterned wafer surfaces at advanced process nodes . TEBO technology has been developed to provide
effective, damage-free cleaning for 2D and 3D patterned wafers with fine feature sizes. We have demonstrated the damage-free cleaning capabilities of TEBO technology on patterned wafers for feature nodes as small as 1xnm (16 to 19
nanometers, or nm), and we have shown TEBO technology can be applied in manufacturing processes for patterned chips with 3D architectures having aspect ratios as high as 60‑to‑1.
●
Tahoe technology for cost and environmental savings. Tahoe technology delivers high cleaning performance using significantly less sulfuric acid and hydrogen peroxide
than is typically consumed by conventional high-temperature single-wafer cleaning tools.
●
ECP technology for advanced
metal plating. Our Ultra ECP ap, or Advanced Packaging, technology was developed for back-end assembly processes to deliver a more uniform metal layer at the notch area of wafers prior to packaging. Our Ultra ECP map, or
Multi-Anode Partial Plating, technology was developed for front-end wafer fabrication processes to deliver advanced electrochemical copper plating for copper interconnect applications. Ultra ECP map offers improved gap-filling
performance for ultra-thin seed layer applications, which is critical for advanced nodes at 28nm, 14nm and beyond.
In 2020 we introduced and delivered a range of new tools intended to broaden our revenue opportunity with global semiconductor manufacturers. Product extensions include the Ultra SFP ap tool for
advanced packaging solutions, the Ultra C VI 18-chamber single wafer cleaning tool for advanced memory devices, and the Ultra ECP 3d platform for through-silicon-via, or tsv, application. New product lines include the Ultra fn Furnace, our first
dry processing tool, and a suite of semi-critical cleaning systems which include single wafer back side cleaning, scrubber, and auto bench cleaning tools.
We have been issued more than 411 patents in the United States, the People’s Republic of China or PRC, Japan, Singapore, South Korea and Taiwan.
We conduct a substantial majority of our product development, manufacturing, support and services in the PRC, with additional product
development and subsystem production in South Korea. Substantially all of our integrated tools are built to order at our manufacturing facilities in the Pudong region of Shanghai, which now encompass a total of 236,000 square feet of floor space
for production capacity, with 100,000 square feet having been added in 2021 with the lease of a second building in the Pudong region of Shanghai. In May 2020 ACM Shanghai, through its wholly owned subsidiary Shengwei Research (Shanghai), Inc.,
entered into an agreement for a land use right in the Lingang region of Shanghai. In 2020 Shengwei Research (Shanghai), Inc. began a multi-year construction project for a new 1,000,000 square foot development and production center that will
incorporate state-of-the-art manufacturing systems and automation technologies, and will provide floor space to support significantly increase production capacity and related research and development activities. Our experience has shown that chip
manufacturers in the PRC and throughout Asia demand equipment meeting their specific technical requirements and prefer building relationships with local suppliers. We will continue to seek to leverage our local presence in the PRC and South Korea
to address the growing market for semiconductor manufacturing equipment in the region by working closely with regional chip manufacturers to understand their specific requirements, encourage them to adopt our technologies, and enable us to design
innovative products and solutions to address their needs.
5
Table of Contents
On November 18, 2021, ACM’s operating subsidiary, ACM Research (Shanghai), Inc., or ACM Shanghai, successfully completed its initial public offering of shares of ACM Shanghai in the PRC, which
we refer to as the STAR IPO, and its shares began trading on the Shanghai Stock Exchange’s Sci-Tech innovAtion boaRd, known as the STAR Market, which we refer to as the STAR Listing, as described under “Item 7. Management’s Discussion and Analysis
of Financial Condition and Results of Operations—STAR Market Listing and IPO.”
Our Technology and Product Offerings
Wet Cleaning Equipment for Front End Production Processes
Chip fabricators can use our single-wafer wet-cleaning tools in numerous steps to improve product yield in the front-end production process, during which individual devices are patterned in a
chip prior to being interconnected on a wafer. Our wet-cleaning equipment has been developed using our proprietary SAPS, TEBO and Tahoe technologies, which allow our tools to remove random defects from a wafer surface effectively, without damaging
a wafer or its features, even at increasingly advanced process nodes (the minimum line widths on a chip) of 22nm or less. We use a modular configuration that enables us to create a wet-cleaning tool meeting the specific requirements of a customer,
while using pre-existing designs for chamber, electrical, chemical delivery and other modules. Our modular approach supports a wide range of customer needs and facilitates the adaptation of our model tools for use with the optimal chemicals
selected to meet a customer’s requirements. Our tools are offered principally for use in manufacturing chips from 300 millimeter, or mm, silicon wafers, but we also offer solutions for 150mm and 200mm wafers and for nonstandard substrates,
including compound semiconductor, quartz, sapphire, glass and plastics.
SAPS Technology, Applications and Equipment
SAPS Technology
SAPS technology delivers megasonic energy uniformly to every point on an entire wafer by alternating phases of megasonic waves in the gap between a megasonic transducer and the wafer. Radicals
for removing random defects are generated in dilute solution, and the radical generation is promoted by megasonic energy. Unlike “stationary” megasonic transducers used in conventional megasonic cleaning methods, SAPS technology moves or tilts a
transducer while a wafer rotates, enabling megasonic energy to be delivered uniformly across all points on the wafer, even if the wafer is warped. The mechanical force of cavitations generated by megasonic energy enhances the mass transfer rate of
dislodged random defects and improves particle removal efficiency.
By delivering megasonic energy in a highly uniform manner on a microscopic level, SAPS technology can precisely control the intensity of megasonic energy and can effectively remove random defects
of all sizes across the entire wafer in less total cleaning time than conventional megasonic cleaning products, without loss of material or roughing of wafer surfaces. We have conducted trials demonstrating SAPS technology to be more effective than
conventional megasonic and jet spray cleaning technologies as defect sizes shrink from 300nm to 20nm and below. These trials show that SAPS technology has an even greater relative advantage over conventional jet spray technology for cleaning
defects between 50 and 65nm in size, and we expect the relative benefits of SAPS will continue to apply in cleaning even smaller defect sizes.
SAPS Applications
SAPS megasonic cleaning technology can be applied during the chip fabrication process to clean wafer surfaces and interconnects. It also can be used to
clean, and lengthen the lifetime, of recycled test wafers.
6
Table of Contents
Wafer Surfaces. SAPS technology can enhance removal of random defects following planarization and deposition, which are among the most important, and most
repeated, steps in the fabrication process:
●
Post CMP : Chemical mechanical planarization, or CMP, uses an abrasive chemical slurry following other fabrication processes, such as deposition and etching, in order
to achieve a smooth wafer surface in preparation for subsequent processing steps. SAPS technology can be applied following each CMP process to remove residual random defects deposited or formed during CMP.
●
Post Hard Mask Deposition: As part of the photolithographical patterning process, a mask is applied with each deposition of a material layer to prevent etching of
material intended to be retained. Hard masks have been developed to etch high aspect-ratio features of advanced chips that traditional masks cannot tolerate. SAPS technology can be applied following each deposition step involving hard masks
that use nitride, oxide or carbon based materials to achieve higher etch selectivity and resolution.
For these purposes, SAPS technology uses environmentally friendly dilute chemicals, reducing chemical consumption. Chemical types include dilute solutions of chemicals used in RCA cleaning, such
as dilute hydrofluoric acid and RCA SC-1 solutions, and, for higher quality wafer cleaning, functional de-ionized water produced by dissolving hydrogen, nitrogen or carbon dioxide in water containing a small amount of chemicals, such as ammonia.
Functional water removes random defects by generating radicals, and megasonic excitation can be used in conjunction with functional water to further increase the generation of radicals. Functional water has a lower cost and environmental impact
than RCA solutions, and using functional water is more efficient in eliminating random defects than using dilute chemicals or de-ionized water alone. We have shown that SAPS megasonic technology using functional water exhibits high efficiency in
removing random defects, especially particles smaller than 65nm, with minimal damage to structures.
Interconnects and Barrier Metals . Each successive advanced process node has led to finer feature sizes of interconnects such as contacts, which form
electrical pathways between a transistor and the first metal layer, and vias, which form electrical pathways between two metal layers. Advanced nodes have also resulted in higher aspect ratios for interconnect structures, with thinner, redesigned
metal barriers being used to prevent diffusion. SAPS technology can improve the removal of residues and other random defects from interconnects during the chip fabrication process:
●
Post Contact/Via Etch: Wet etching processes are commonly used to create patterns of high-density contacts and vias. SAPS technology can be applied after each such
etching process to remove random defects that could otherwise lead to electrical shorts.
●
Pre Barrier Metal Deposition : Copper wiring requires metal diffusion barriers at the top of via holes to prevent electrical leakage. SAPS technology can be applied
prior to deposition of barrier metal to remove residual oxidized copper, which otherwise would adhere poorly to the barrier and impair performance.
For these applications, SAPS technology uses environmentally friendly dilute chemicals such as dilute hydrofluoric acid, RCA SC-1 solution, ozonated de-ionized water and functional de-ionized
water with dissolved hydrogen. These chemical solutions take the place of piranha solution, a high-temperature mixture of sulfuric acid and hydrogen peroxide used by conventional wet wafer cleaning processes. We have shown that SAPS technology
exhibits greater efficiency in removing random defects, and lower levels of material loss, than conventional processes, and our chemical solutions are less expensive and more environmentally conscious than piranha solution.
Recycled Test Wafers. In addition to using silicon wafers for chip production, chip manufacturers routinely
process wafers through a limited portion of the front-end fabrication steps in order to evaluate the health, performance and reliability of those steps. Manufacturers also use wafers for non-product purposes such as inline monitoring. Wafers used
for purposes other than manufacturing revenue products are known as test wafers, and it is typical for twenty to thirty percent of the wafers circulating in a fab to be test wafers. In light of the significant cost of wafers, manufacturers seek to
re-use a test wafer for more than one test. As test wafers are recycled, surface roughness and other defects progressively impair the ability of a wafer to complete tests accurately. SAPS technology can be applied to reduce random defect levels of
a recycled wafer, enabling the test wafer to be reclaimed for use in additional testing processes. For these purposes, SAPS technology includes improved fan filter units that balances intake and exhaust flows, precise temperature and concentration
controls that ensure better handling of concentrated acid processes, and two-chemical recycle capability that reduces chemical consumption.
7
Table of Contents
SAPS Equipment
We offer two principal models of wet wafer cleaning equipment based on our SAPS technology, Ultra C SAPS II and Ultra C SAPS V. Each of these models is a single-wafer, serial-processing tool that
can be configured to customer specifications and, in conjunction with appropriate dilute chemicals, used to remove random defects from wafer surfaces or interconnects and barrier metals as part of the chip front-end fabrication process or for
recycling test wafers. By combining our megasonic and chemical cleaning technologies, we have designed these tools to remove random defects with greater efficacy and efficiency than conventional wafer cleaning processes, with enhanced process
flexibility and reduced quantities of chemicals. Each of our SAPS models was initially built to meet specific requirements of a key customer.
SAPS II (released in 2011). Highlights of our SAPS II equipment include:
● compact design, with footprint of 2.65m x 4.10m x 2.85m (WxDxH), requiring limited clean room floor space;
● up to 8 chambers, providing throughput of up to 225 wafers per hour;
● double-sided cleaning capability, with up to 5 cleaning chemicals for process flexibility;
● 2-chemical recycling capability for reduced chemical consumption;
● image wafer detection method for lowering wafer breakage rates; and
● chemical delivery module for delivery of dilute hydrofluoric acid, RCA SC-1 solution, functional de-ionized water and carbon dioxide to each of
the chambers.
SAPS V (released in 2014). SAPS V includes SAPS II features with the following upgrades:
● compact design, with footprint of 2.55m x 5.1m x 2.85m (WxDxH), requiring limited clean room floor space;
● up to 12 chambers, providing throughput of up to 375 wafers per hour;
● chemical supply system integrated into mainframe;
● inline mixing method replaces tank auto-changing, reducing process time; and
● improved drying technology using hot isopropyl alcohol and de-ionized water.
8
Table of Contents
TEBO Technology, Applications and Equipment
TEBO Technology
We developed TEBO technology for application in wet wafer cleaning during the fabrication of 2D and 3D wafers with fine feature sizes. TEBO technology facilitates effective cleaning even with
patterned features too small or fragile to be addressed by conventional jet spray and megasonic cleaning technologies.
TEBO technology solves the problems created by transient cavitation in conventional megasonic cleaning processes. Cavitation is the formation of bubbles in a liquid, and transient cavitation is a
process in which a bubble in fluid implodes or collapses. In conventional megasonic cleaning processes, megasonic energy forms bubbles and then causes those bubbles to implode or collapse, blasting destructive high-pressure, high-temperature micro
jets toward the wafer surface. Our internal testing has confirmed that at any level of megasonic energy capable of removing random defects, the sonic energy and mechanical force generated by transient cavitation are sufficiently strong to damage
fragile patterned structures with features less than 70nm.
TEBO technology provides multi-parameter control of cavitation by using a sequence of rapid changes in pressure to force a bubble in liquid to oscillate at controlled sizes, shapes and
temperatures, rather than implode or collapse. As a result, cavitation remains stable during TEBO megasonic cleaning processes, and a chip fabricator can, using TEBO technology, apply the level of megasonic energy needed to remove random defects
without incurring the pattern damage created by transient cavitation in conventional megasonic cleaning.
We have demonstrated the damage-free or low-damage cleaning capabilities of TEBO technology on customers’ patterned wafers as small as 1xnm (16nm to 19nm), and we believe TEBO technology will be
applicable in even smaller fabrication process nodes. TEBO technology can be applied in manufacturing processes for conventional 2D chips with fine features and advanced chips with 3D structures, including Fin Field Effect Transistors or FinFET,
DRAM, 3D NAND and 3D cross point memory, and we expect it will be applicable to other 3D architectures developed in the future, such as carbon nanotubes and quantum devices. As a result of the thorough, controlled nature of TEBO processes, cleaning
time for TEBO-based solutions may take longer than conventional megasonic cleaning processes. Conventional processes have proven ineffective, however, for process nodes of 20nm or less, and we believe the increased yield that can be achieved by
using TEBO technology for nodes up to 70nm can more than offset the cost of the additional time in utilizing TEBO technology.
TEBO Applications
At process nodes of 28nm and less, chip makers face escalating challenges in eliminating nanometric particles and maintaining the condition of inside pattern surfaces. In order to maintain chip
quality and avoid yield loss, cleaning technologies must control random defects of diminishing killer defect sizes, without roughing or otherwise damaging surfaces of transistors, interconnects or other wafer features. TEBO technology can be
applied in numerous steps throughout the manufacturing process flow for effective, damage-free cleaning:
●
Memory Chips: We estimate that TEBO technology can be applied in as many as 50 steps in the fabrication of a DRAM chip, consisting of up to 10 steps in cleaning ISO
structures, 20 steps in cleaning buried gates, and 20 steps in cleaning high aspect-ratio storage nodes and stacked films.
●
Logic Chips: In the fabrication process for a logic chip with a FinFET structure, we estimate that TEBO technology can be used in 15 or more cleaning steps.
For purposes of solving inside pattern surface conditions for memory or logic chips, TEBO technology uses environmentally friendly dilute chemicals such
as RCA SC-1 and hydrogen gas doped functional water.
9
Table of Contents
TEBO Equipment
We offer two models of wet wafer cleaning equipment based on our TEBO technology, Ultra C TEBO II and Ultra C TEBO V. Each of these models is a single-wafer, serial-processing tool that can be
configured to customer specifications and, in conjunction with appropriate dilute chemicals, used at numerous manufacturing processing steps for effective, damage-free cleaning of chips at process nodes of 28nm or less. TEBO equipment solves the
problem of pattern damage caused by transient cavitation in conventional jet spray and megasonic cleaning processes, providing better particle removal efficiency with limited material loss or roughing. TEBO equipment is being evaluated by a select
group of leading memory and logic chip customers.
Each model of TEBO equipment includes:
● an equipment front-end module, or EFEM, which moves wafers from chamber to chamber;
● one or more chamber modules, each equipped with a TEBO megasonic generator system;
● an electrical module to provide power for the tool; and
● a chemical delivery module.
Ultra C TEBO II (released in 2016). Highlights of our Ultra C TEBO II equipment include:
● compact design, with footprint of 2.25m x 2.25m x 2.85m (WxDxH);
● up to 8 chambers with an upgraded transport system and optimized robotic scheduler, providing throughput of up to 300 wafers per hour;
● EFEM module consisting of 4 load ports, transfer robot and 1 process robot; and
● focus on dilute chemicals contributes to environmental sustainability and lower cost of ownership.
Ultra C TEBO V (released in 2016). Highlights of our Ultra C TEBO V equipment include:
● footprint of 2.45m x 5.30m x 2.85m (WxDxH);
● up to 12 chamber modules, providing throughput of up to 300 wafers per hour;
● EFEM module consisting of 4 load ports, 1 transfer robot and 1 process robot; and
● chemical delivery module for delivery of isopropyl alcohol, dilute hydrofluoric acid, RCA SC-1 solution, functional de-ionized water and carbon
dioxide to each of the chambers.
Tahoe Overview
Our Ultra-C Tahoe wafer cleaning tool can deliver high cleaning performance using significantly less sulfuric acid and hydrogen
peroxide than is typically consumed by conventional high-temperature single-wafer cleaning tools. During normal single-wafer cleaning processes, only a fraction of the acid reacts with the wafer surface, while the majority is wasted as acid spins
off the wafer and requires significant cost and effort to be recycled. Tahoe employs a proprietary hybrid approach in which the sulfuric acid cleaning steps are processed in batch mode, and the final stage cleaning are processed with
single-wafer cleaning technologies. In addition to providing cost savings resulting from vastly reduced sulfuric acid consumption, Ultra-C Tahoe meets the needs of customers who face increased environmental regulations and demand new, more
environmentally friendly tools. We delivered our first Ultra C Tahoe tool to a strategic customer in 2019.
10
Table of Contents
Advanced Packaging and other Back-End Processing Tools
We leverage our technology and expertise to provide a range of single-wafer tools for back-end wafer assembly and packaging factories. We develop, manufacture and sell a wide range of advanced
packaging tools, such as coaters, developers, photoresist strippers, scrubbers, wet etchers and copper-plating tools. We focus on providing custom-made, differentiated equipment that incorporates customer-requested features at a competitive price.
For example, our Ultra C Coater is used in applying photoresist, a light-sensitive material used in photolithography to transfer a
pattern from a mask onto a wafer. Coaters typically provide input and output elevators, shuttle systems and other devices to handle and transport wafers during the coating process. Unlike most coaters, the Ultra C Coater is fully automated. Based
on requests from customers, we developed and incorporated the special function of chamber auto-clean module into the Ultra C Coater, which further differentiates it from other products in the market by reducing or eliminating the cleaning of
shroud in the coater which increases the tool’s continuous production time. The Ultra C Coater is designed to deliver improved throughput and more efficient tool utilization while eliminating particle generation.
Our other advanced packaging tools include: Ultra ECP ap, which delivers a uniform metal layer to finished wafers prior to packaging; Ultra C Developer, which applies liquid developer to
selected parts of photoresist to resolve an image; Ultra C PR Megasonic-Assisted Stripper, which removes photoresist; Ultra C Scrubber, which scrubs and cleans wafers; Ultra C Thin Wafer Scrubber, which addresses a sub-market of cleaning very thin
wafers for certain Asian assembly factories; and Ultra C Wet Etcher, which etches silicon wafers and copper and titanium interconnects.
Our Customers
Since 2009 we have delivered more than 225 wet cleaning and other front-end processing tools, more than 185 of which were repeat orders or acceptances upon contractual performance obligations
having been met and thereby generated revenue to us. The balance of the delivered tools are awaiting customer acceptance should contractual conditions be met. To date, substantially all of our sales of equipment for semiconductor-manufacturing have
been to customers located in Asia, and we anticipate that a substantial majority of our revenue from these products will continue to come from customers located in this region for the foreseeable future. We have begun to add to our efforts to
further address customers in North America, Western Europe and Southeast Asia, by expanding our direct sales teams and increasing our global marketing activities.
We generate most of our revenue from a limited number of customers as the result of our strategy of initially placing equipment with a small number of leading chip manufacturers that are driving
technology trends and key capability implementation. In 2021, 48.9% of our revenue was derived from two customers: Shanghai Huali Microelectronics Corporation together with Huahong Semiconductor Ltd., collectively known as The Shanghai Huahong
(Group) Company, Ltd., or The Huali Huahong Group, a leading PRC foundry, accounted for 28.1% of our revenue; and Yangtze Memory Technologies Co., Ltd., a leading PRC memory chip company, together with one of its subsidiaries, accounted for 20.8%
of our revenue; In 2020, 75.8% of our revenue was derived from three customers: The Huali Huahong Group accounted for 36.9% of our revenue; Yangtze Memory Technologies Co., Ltd., together with one of its subsidiaries, accounted for 26.8% of our
revenue; and Semiconductor Manufacturing International Corporation, a leading PRC foundry, accounted for 12.1% of our revenue. In 2019 73.8% of our revenue was derived from three customers: Yangtze Memory Technologies Co., Ltd., together with its
subsidiaries, accounted for 27.5% of our revenue; The Huali Huahong Group accounted for 26.5% of our revenue; and SK Hynix Inc., a leading Korean memory chip company, accounted for 19.8% of our revenue.
11
Table of Contents
Based on our market experience, we believe that implementation of our equipment by one of our selected chip manufacturers will attract and encourage other manufacturers to evaluate our equipment,
because the leading company’s implementation will serve as validation of our equipment and could enable the other manufacturers to shorten their evaluation processes. As an example, we placed our first SAPS tool in 2009 as a prototype. We worked
closely with the customer for two years in debugging and modifying the tool, and the customer then spent two more years of qualification and running pilot production before beginning volume manufacturing. Our revenue in 2015 included sales of SAPS
tools following the customer’s completion of its qualification process. The period from new product introduction to high volume manufacturing can range from one to several years.
For our back-end wafer assembly and packaging customers, we focus on providing custom-made, differentiated equipment that incorporates a customer’s requested features at a competitive cost of
ownership. Our customers for advanced packaging, wafer processing, and other back-end processing tools have included Jiangyin Changdian Advanced Packaging Co. Ltd., a leading PRC-based wafer bumping packaging house that is a subsidiary of JCET
Group Co., Ltd.; Nantong Tongfu Microelectronics Co., Ltd., a PRC-based chip assembly and testing company that is a subsidiary of Nantong Fujitsu Microelectronics Co., Ltd.; Nepes Co., Ltd., a semiconductor packaging company based in South Korea
which acquired the operations of Deca Technologies’ Philippines manufacturing facility in 2020; and Wafer Works Corporation, a leading PRC-based wafer supplier.
Sales and Marketing
We market and sell our products worldwide using a combination of our direct sales force and third-party representatives. We employ direct sales teams in Asia, Europe and North America, and have
located these teams near our customers, primarily in the PRC, South Korea, Taiwan and the United States. Each sales person has specific local market expertise. We also employ field application engineers, who are typically co-located with our direct
sales teams, to provide technical pre- and post-sale support tours and other assistance to existing and potential customers throughout the customers’ fab planning and production line qualification and fab expansion phases. Our field application
engineers are organized by end markets as well as core competencies in hardware, control system, software and process development to support our customers.
To supplement our direct sales teams, we have contacts with several independent sales representatives in the PRC, South Korea and Taiwan. We select these independent representatives based on
their ability to provide effective field sales, marketing forecast and technical requirement updates for our products. In the case of representatives, our customers place purchase orders with us directly rather than with the representatives.
Our sales have historically been made using purchase orders with agreed technical specifications. Our sales terms and conditions are generally consistent with industry practice, but may vary from
customer to customer. We seek to obtain a purchase order two to six months ahead of the customer’s desired delivery date. Consistent with industry practice, we allow customers to reschedule or cancel orders at a certain cost to them on relatively
short notice. Because of our relatively short delivery period and our practice of permitting rescheduling or cancellation, we believe that backlog is not a reliable indicator of our future revenue.
Our marketing team focuses on our product strategy and technology road maps, product marketing, new product introduction processes, demand assessment and competitive analysis, customer
requirement communication and public relations. Our marketing team also has the responsibility to conduct environmental scans, study industry trends and arrange our participation at major trade shows.
Manufacturing
We conduct a substantial majority of our product development, manufacturing, support and services in the PRC, with additional product development and
subsystem production in South Korea. Substantially all of our tools are built to order at our manufacturing facilities in the Pudong region of Shanghai, which now encompass a total of 236,000 square feet of floor space for production capacity.
12
Table of Contents
In May 2020 ACM Shanghai, through its wholly owned subsidiary Shengwei Research (Shanghai), Inc., entered into an agreement for a land use right in the Lingang region of Shanghai. In July 2020
Shengwei Research (Shanghai), Inc. began a multi-year construction project for a new development and production center. The planned 1,000,000 square foot facility will incorporate state-of-the-art manufacturing systems and automation technologies,
and will provide the floor space to support significantly more production capacity and related research and development activities when fully-staffed and supplied. See “Item 2. Properties,” of Part I of this report.
Our experience has shown that chip manufacturers in the PRC and throughout Asia demand equipment meeting their specific technical requirements and prefer building relationships with local
suppliers. We will continue to seek to leverage our local presence to address the growing market for semiconductor manufacturing equipment in the region by working closely with regional chip manufacturers to understand their specific requirements,
encourage them to adopt our SAPS, TEBO, Tahoe, ECP, furnace and other technologies in our current portfolio our product roadmap, and enable us to design innovative products and solutions to address their needs.
Currently substantially all of our staff are able to work at both of our Shanghai facilities, and to date we have not experienced absenteeism of management or other key employees, other than certain of our executive
officers being delayed in travelling back to the PRC when working from our California office. For additional information, see “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations—COVID-19 Pandemic,” of Part
II of this report.
We purchase some of the components and assemblies that we include in our products from single source suppliers. We believe that we could obtain and qualify alternative sources to supply these
components. Nevertheless, any prolonged inability to obtain these components could have an adverse effect on our operating results and could unfavorably impact our customer relationships. Please see “Item 1A. Risk Factors—Risks Related to Our
Business and Our Industry—We depend on a limited number of suppliers, including single source suppliers, for critical components and assemblies, and our business could be disrupted if they are unable to meet our needs.”
Research and Development
We believe that our success depends in part on our ability to develop and deliver breakthrough technologies and capabilities to meet our customers’ ever-more challenging technical requirements.
For this reason, we devote significant financial and personnel resources to research and development. Our research and development team is comprised of highly skilled engineers and technologists with extensive experience in megasonic technology,
cleaning processes and chemistry, mechanical design, and control system design. To supplement our internal expertise, we have or are currently collaborating with external research and development entities such as International SEMATECH, Shanghai
Integrated Circuits Research & Development Center (ICRD), and IMEC on specific areas of interests. We also retain, as technical advisors, several experts in semiconductor technology.
For the foreseeable future we are focusing on enhancing our Ultra C SAPS, TEBO, Tahoe, ECP, furnace and other tools and integrating additional capabilities to meet and anticipate requirements
from our existing and potential customers. Our particular areas of focus include development of the following:
●
new cleaning steps for Ultra C SAPS cleaners for application in logic chips and for DRAM, and 3D NAND technologies;
●
new cleaning steps for Ultra C TEBO cleaners for FinFET in logic chips, gates in DRAM, and deep vias in 3D NAND technologies;
●
new cleaning steps for Ultra Tahoe cleaners for application in logic chips and for DRAM and 3D NAND technologies;
●
new dry technologies such as supercritical CO2 dry and advanced IPA dry for DRAM, and logic technologies;
●
new hardware, including new system platforms, new and additional chamber structures and new chemical blending systems; and
13
Table of Contents
●
new software to integrate new functionalities to improve tool performance.
Longer term, we are working on new proprietary process capabilities based on our existing tool hardware platforms. We are also working
to integrate our tools with third-party tools in adjacent process areas in the chip manufacturing flow. We are developing two new product categories of semiconductor tools to further increase our addressable market.
Our research and development expense totaled $34.2 million or 13.4% of revenue in 2021; $19.1 million or 12.2% of revenue in 2020; and $12.9 million, or 12.0% of revenue, in 2019. We intend to
continue to invest in research and development to support and enhance our existing cleaning products and to develop future product offerings to build and maintain our technology leadership position.
Intellectual Property
Our success and future revenue growth depend, in part, on our ability to protect our intellectual property. We control access to and use of our proprietary technologies, software and other
confidential information through the use of internal and external controls, including contractual protections with employees, consultants, advisors, customers, partners and suppliers. We rely primarily on patent, copyright, trademark and trade
secret laws, as well as confidentiality procedures, to protect our proprietary technologies and processes. All employees and consultants are required to execute confidentiality agreements in connection with their employment and consulting
relationships with us. We also require them to agree to disclose and assign to us all inventions conceived or made in connection with the employment or consulting relationship.
We have aggressively pursued intellectual property since our founding in 1998. We focus our patent filing efforts in the United States, and, when justified by cost and strategic importance, we
file corresponding foreign patent applications in strategic jurisdictions such as the European Union, the PRC, Japan, Singapore, South Korea, and Taiwan. Our patent strategy is designed to provide a balance between the need for coverage in our
strategic markets and the need to maintain costs at a reasonable level.
As of December 31, 2021, we had 38 issued patents, and 30 patents pending, in the United States. These patents carry expiration dates from 2022 through
2039. Many of the US patents and applications have also been filed internationally, in one or more of the European Union, Japan, PRC, Singapore, South Korea, and Taiwan. Specifically, we own patents in wafer cleaning, electro-polishing and plating,
wafer preparation, and other semiconductor processing technologies. We have been issued more than 411 patents in the United States, the PRC, Japan, Korea, Singapore and Taiwan.
We manufacture advanced single-wafer cleaning systems equipped with our SAPS, TEBO and Tahoe technologies. Our wafer cleaning technologies are protected by US Patent Numbers 8580042, 8671961,
9070723, 9281177, 9492852, 9595457, 9633833, 10020208, 10910244, 11103898, 11037804, and 11141762 as well as their corresponding international patents. We have 40 patents granted internationally protecting our SAPS technologies. We also have filed
11 international patent applications for key TEBO technologies, and 3 for Tahoe, in accordance with the Patent Cooperation Treaty, in anticipation of filing in the U.S. national phase.
In addition to the above core technologies, we have technologies for SFP and ECP that are used in certain of our tools. SFP is an integral part of the electro polishing process. Our technology
was a breakthrough in electro-chemical-copper-planarization technology when it was first introduced, because it can polish, stress-free, copper layers used in copper low-K interconnects. Our innovations in SFP and ECP are reflected in US Patent
Numbers 6638863, 8518224, 10227705, and 11008669 and their corresponding international counterparts.
We also have technologies in other semiconductor processing areas, such as wafer preparation and some specific processing steps. The wafer preparation technology is covered by US Patent Numbers
8383429 and 9295167. The specific processing steps include US Patent Number 8598039 titled “Barrier layer removal method and apparatus,” and US Patent Number 10615073 titled “method for removing barrier layer for minimizing sidewall recess.”
14
Table of Contents
To date we have not granted licenses to third parties under the patents described above. Not all of these patents have been implemented in products. We may enter into licensing or cross-licensing
arrangements with other companies in the future.
We cannot assure you that any patents will issue from any of our pending applications. Any rights granted under any of our existing or future patents may not provide meaningful protection or any
commercial advantage to us. With respect to our other proprietary rights, it may be possible for third parties to copy or otherwise obtain and use our proprietary technology or marks without authorization or to develop similar technology
independently.
The semiconductor equipment industry is characterized by vigorous protection and pursuit of intellectual property rights or positions, which have resulted in often protracted and expensive
litigation. We may in the future initiate claims or litigation against third parties to determine the validity and scope of proprietary rights of others. In addition, we may in the future initiate litigation to enforce our intellectual property
rights or the rights of our customers or to protect our trade secrets.
Our customers could become the target of litigation relating to the patent or other intellectual property rights of others. This could trigger technical support and indemnification obligations in
some of our customer agreements. These obligations could result in substantial expenses, including the payment by us of costs and damages related to claims of patent infringement. In addition to the time and expense required for us to provide
support or indemnification to our customers, any such litigation could disrupt the businesses of our customers, which in turn could hurt our relations with our customers and cause the sale of our products to decrease. We do not have any insurance
coverage for intellectual property infringement claims for which we may be obligated to provide indemnification.
Additional information about the risks relating to our intellectual property is provided under “Item 1A. Risk Factors—Risks Relating to Our Intellectual Property.”
Competition
The chip equipment industry is characterized by rapid change and is highly competitive throughout the world. We compete with
semiconductor equipment companies located around the world, and we may also face competition from new and emerging companies, including new competitors from the PRC. We consider our principal competitors to be those companies that provide wafer
cleaning and electrical plating products to the market, including Lam Research Corporation, NAURA Technology Group Co., Ltd., Mujin Electronics Co., Ltd., SCREEN SPE USA, LLC (a subsidiary of SCREEN Holdings Co., Ltd.), SEMES Co. Ltd., Tokyo
Electron Ltd. and Kokusai Semiconductor Equipment Corporation.
Compared to our company, our current and potential competitors may have:
●
better established credibility and market reputations, longer operating histories, and broader product offerings;
●
significantly greater financial, technical, marketing and other resources, which may allow them to pursue design, development, manufacturing, sales, marketing, distribution and service support of their
products;
●
more extensive customer and partner relationships, which may position them to identify and respond more successfully to market developments and changes in customer demands; and
●
multiple product offerings, which may enable them to offer bundled discounts for customers purchasing multiple products or other incentives that we cannot match or offer.
The principal competitive factors in our market include:
●
performance of products, including particle removal efficiency, rate of damage to wafer structures, high temperature chemistry, throughput, tool uptime and reliability, safety, chemical waste treatment, and
environmental impact;
15
Table of Contents
●
gap filling capability, the deposited film thickness uniformity within wafer and wafer to wafer, particle generated on the wafer during the
processes;
●
service support capability and spare parts delivery time; innovation and development of functionality and features that are must-haves for advanced fabrication nodes;
●
ability to anticipate customer requirements, especially for advanced process nodes of less than 45nm; ability to identify new process applications;
●
brand recognition and reputation; and
●
skill and capability of personnel, including design engineers, manufacturing engineers and technicians, application engineers, and service engineers.
In addition, semiconductor manufacturers must make a substantial investment to qualify and integrate new equipment into semiconductor
production lines. Some manufacturers began fabricating chips for the 5nm node in 2020 and the 3nm node in 2022. Once a semiconductor manufacturer has selected a particular supplier’s equipment and qualified it for production, the manufacturer
generally maintains that selection for that specific production application and technology node as long as the supplier’s products demonstrate performance to specification in the installed base. Accordingly, we may experience difficulty in
selling to a given manufacturer if that manufacturer has qualified a competitor’s equipment. If, however, that cleaning equipment constrains chip yield, we expect, based on our experience to date, that the manufacturer will evaluate implementing
new equipment that cleans more effectively.
We focus on the high-end fabrication market with advanced nodes, and we believe we compete favorably with respect to the factors described above. Most of our competitors offer single-wafer
cleaning products using jet spray technology, which has relatively poor particle removal efficiency for random defects less than 30nm in size and presents increased risk of damage to the fragile patterned architectures of wafers at advanced process
nodes. Certain of our competitors offer single-wafer cleaning products with megasonic cleaning capability, but we believe these products, which use conventional megasonic technology, are unable to maintain energy dose uniformity on the entire wafer
and often lack the ability to repeat the requisite uniform energy dose wafer to wafer in production, resulting in poor efficiency in removing random defects, longer processing time and greater loss of material. In addition, these conventional
megasonic products generate transient cavitation, which results in more incidents of damage to wafer structures with feature sizes of 70nm or less. We design our cleaning tools equipped with our proprietary SAPS, TEBO and Tahoe technologies, which
we believe offer better performance, much less chemical consumption, and lower cost of consumables, including at advanced process nodes of 22nm or less.
Human Capital
As of December 31, 2021, we had 877 full-time equivalent employees, of whom 85 were in administration, 200 were in manufacturing, 371 were in research and development, and 221 were in sales and marketing and customer services. Of these employees, 783 were located in mainland China and the Taiwan region, 84 were located in Korea and 10 were based in the United States. We have never
had a work stoppage, and none of our employees are represented by a labor organization or subject to any collective bargaining arrangements. We consider our employee relations to be good.
We compete in the highly competitive semiconductor equipment industry, with operations principally in the PRC. Attracting, developing, and retaining skilled and experienced employees in research
and development, manufacturing, sales and marketing, and other positions is crucial to our ability to compete effectively. Our ability to recruit and retain such employees depends on a number of factors, including our corporate culture and work
environment, informed by our values and behaviors, our corporate philosophy of talent development and career opportunities, and compensation and benefits.
Recruitment, Retention and Benefits
To attract and retain qualified employees and key talent, we offer total compensation packages that are competitive with comparable companies, particularly in the PRC and, specifically, Shanghai.
16
Table of Contents
We provide training and development programs to our employees, and we have trained many of our key engineers and managers for more than a decade. Retention of these key employees is critical to
secure our future growth and technology development. To assist in employee retention and recruitment, we intend to offer employee housing in the Lingang region of Shanghai in connection with ACM Shanghai’s acquisition of a land use right in
Lingang, where we began construction of a new research and development center and factory in July 2020.
Health and Safety, Pandemic Response
When it comes to employee safety, we are committed to providing a safe work environment for our employees that meets or exceeds local environmental, health, and safety laws and regulations. As a
result of the COVID-19 pandemic, we have augmented certain of our normal business practices to ensure that we promote health and safety for our employees. We have established safety policies and protocols, and we regularly update our employees with
respect to any changes. A majority of our workforce provide services that cannot be performed remotely, and we have prioritized the health of those individuals that continue to work at our facilities. We have provided personal protective equipment
and cleaning supplies. We require masks to be worn in our facilities and have prohibited all non-essential domestic and international travel for all employees. We have also provided general information updates and support for our employees to
ensure that they have resources and information to protect their health and that of those around them, including their families and co-workers.
COVID-19 Pandemic
Following its initial outbreak in December 2019, COVID–19, or the coronavirus, spread across the PRC, the United States and globally. The COVID–19 outbreak has affected our business and operating
results since the first quarter of 2020. Since that time, travel between our offices in the United States and our facilities in the PRC has been and will likely continue to be restricted, which has and may continue to impact our ability to
effectively operate our company and to oversee our operations. The COVID–19 situation continues to evolve, and it is impossible for us to predict the effect and ultimate impact of the COVID–19 outbreak on our business operations and results. We
continue to monitor the impact of the COVID-19 pandemic on all aspects of our business, including our operations, customers, suppliers and projects. While the ongoing regulatory measures instituted or recommended in response to COVID–19 are
expected to be temporary, the duration of the business disruptions, and related financial impact, of the outbreak cannot be estimated at this time.
See “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations—COVID‑19 Pandemic” of Part II of this report for additional discussion of our
expectations and estimates related to the COVID-19 Pandemic .
Environmental
Severe weather events, including earthquakes, fires, floods, heat waves, hurricanes and other environmental disasters, could pose a threat to our
manufacturing and research and development activities through physical damage to our operating facilities or equipment or disruption of power supply or telecommunications infrastructure. The frequency and intensity of severe weather events are
reportedly increasing throughout the world as part of broader climate changes. Global weather pattern changes may also pose long-term risks of physical impacts to our business. We maintain disaster recovery and business continuity plans that would
be implemented to help us recover in the event of severe weather events that interrupt our business. See “Item 1A. Risk Factors—General—Our production facilities could be damaged or disrupted by a natural disaster, war, terrorist attacks or other
catastrophic events.”
17
Table of Contents
Concerns about climate change have resulted in various laws and regulations that are intended to limit carbon emissions and address other environmental concerns. In recent years, the PRC, where
our production facilities are located, has undertaken comprehensive sustainability initiatives that are requiring companies to meet new environmental standards and deal with higher energy and other production costs. Environmental laws and
regulations may impose new or unexpected either directly through, for example, higher energy costs or indirectly through increased costs of compliance or of failing to comply with these laws and regulations. These laws and regulations might
increase the cost of construction, maintenance and operation of our new research and development center and factory in the Lingang region of Shanghai.
We do not currently expect that existing or pending climate change laws and regulations will be material to our results of operations in the foreseeable future. Climate change could, however,
have a direct effect on our customer base of semiconductor fabricators, whose operations typically require copious quantities of power and water and a number of chemicals. Chip fabrication operations often result in significant amounts of
wastewater, which can contain a number of harmful contaminants, including antimony, arsenic, hydrofluoric acid and hydrogen peroxide, that historically have resulted in groundwater pollution and related violations of environmental laws. Moreover,
water and chemical demands for semiconductor fabrication are expected to increase with the production of more advanced chips at smaller process nodes. As a result, some leading chip fabricators have begun to invest in conservation and treatment
technologies for water and chemicals.
We have designed some of our tools to require significantly reduced levels of environmentally harmful chemicals, which helps customers face increased
environmental laws and regulations. SAPS and TEBO technologies use environmentally friendly dilute chemicals, such as dilute hydrofluoric acid, RCA SC-1 solution, ozonated de-ionized water and functional de-ionized water with dissolved hydrogen. In
interconnect and barrier metals applications based on SAPS technology, for example, these chemical solutions take the place of chemicals such as piranha solution, a high-temperature mixture of sulfuric acid and hydrogen peroxide used by
conventional wet wafer cleaning processes. Similarly, Tahoe technology delivers high cleaning performance using significantly less sulfuric acid and hydrogen peroxide than is typically consumed by conventional high-temperature single-wafer cleaning
tools. For additional information, see “—Our Technology and Product Offerings—Wet Cleaning Equipment for Front End Production Processes.”
Available Information
We are required to file annual, quarterly and current reports, proxy statements and other information with the U.S. Securities and Exchange Commission, or the SEC. The SEC maintains a website at
www.sec.gov that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC.
Our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, proxy statements and amendments to those documents filed or furnished pursuant to Section 13(a) or
15(d) of the Securities Exchange Act of 1934, or the Exchange Act, are also available free of charge on our website at www.acmrcsh.com as soon as reasonably practicable after such reports are electronically filed with or furnished to the SEC.
Investors should note that we announce material information to our investors and others using filings with the SEC, press releases, public conference
calls, webcasts or our website (www.acmrcsh.com), including news and announcements regarding our financial performance, key personnel, our brands and our business strategy. Information that we post on our corporate website could be deemed material
to investors. We encourage investors to review the information we post on these channels. We may from time to time update the list of channels we will use to communicate information that could be deemed material and will post information about any
such change on www.acmrcsh.com. The information on our website is not, and shall not be deemed to be, a part hereof or incorporated into this or any of our other filings with the SEC.
18
Table of Contents