Item 1. Business
ITEM 1. BUSINESS
Overview
We are a clinical-stage biopharmaceutical company focused on the development and commercialization of orally delivered large molecule therapeutics for use in areas with significant unmet medical need and where adoption of injectable therapies is limited due to cost, convenience and compliance challenges for patients. We were organized under the laws of the State of Israel on September 30, 2009 and commenced operations on June 1, 2010. We have developed a proprietary platform that enables the oral delivery of injectable proteins and large molecules. Our platform has been tested successfully on numerous molecules of broad characteristics and size. We have completed Phase 2 of our lead oral PTH product, EB613 for the treatment of osteoporosis and are preparing to initiate a Phase 3 (potentially pivotal) study in H2/2022. In December 2018, we entered into a research collaboration and license agreement with Amgen for the use of Entera’s oral delivery platform in the field of inflammatory diseases.
Our lead product candidates are EB613 for the treatment of osteoporosis and EB612 for the treatment of hypoparathyroidism. Both EB613 and EB612 are oral formulations of human parathyroid hormone (1-34), or PTH. An injectable formulation of PTH has been approved in the United States for more than a decade for both of these indications (PTH 1-34 for Osteoporosis and PTH 1-84 for Hypoparathyroidism). Currently, the leading products are administered via injection. In total, more than 260 healthy volunteers and patients have received multiple doses of various formulations of our oral PTH (1-34) in clinical trials.
Osteoporosis is a disease characterized by low bone mass and structural deterioration of bone tissue, which leads to greater fragility of bones and an increase in fracture risk. Forteo ® is a once-daily subcutaneous injectable form of PTH (1-34) marketed by Eli Lilly and Company (“Eli Lilly”), that was approved by the U.S. Food and Drug Administration (the “FDA”) in 2002 for the treatment of osteoporosis in the United States and is widely considered one of the most effective treatments due to its ability to build bone. Because our product candidate EB613 is delivered in a patient-friendly oral formulation, we believe it will reduce the treatment and cost burden on patients and lead to significantly higher patient and physician acceptance compared to injectable PTH. In 2020, we engaged a third-party firm to conduct two primary market research studies with clinicians who treat osteoporosis patients. In these two studies, the responses to the prospect of prescribing an oral PTH with demonstrated safety and efficacy were overwhelmingly positive and driven by expected improvements in patient compliance, ease of administration and reduced costs.
In November 2018, we had a pre- Investigational New Drug (“IND”) meeting with the FDA to discuss the EB613 for the treatment of osteoporosis program, and, in December 2020, we announced that the FDA had reviewed our IND application for EB613 and informed us that we may proceed with our U.S. clinical trial.
We have completed two, multi-stage Phase 1 clinical trials of EB613 and a Phase 2 double-blind, placebo-controlled, dose-ranging trial of EB613 in patients with osteoporosis. The Phase 2 trial studied five once-daily doses of EB613 (0.5mg, 1.0mg, 1.5mg and 2.5mg) and placebo for six months and assessed safety, tolerability, bone biomarkers and bone mineral density (BMD). Based on these trials, EB613 appears to be safe and well tolerated with no serious drug-related adverse events reported and produced clinically and statistically significant increases in BMD at month six. The adverse events seen in these trials are consistent with those seen in other published third party trials of PTH (1-34). In December 2021 we held an end-of-Phase 2 meeting with the FDA to review the Phase 2 results and proposed Phase 3 protocol, including various aspects of our nonclinical and clinical development plan and the use of BMD, rather than fracture incidence, as the primary endpoint to support a New Drug Application, or NDA.
Hypoparathyroidism is a rare condition in which the body fails to produce sufficient amounts of PTH or the PTH produced lacks biologic activity. Historically, the treatments for hypoparathyroidism have been calcium supplements, active vitamin D analogs (calcitriol or similar drugs) and occasionally phosphate binders, the chronic use of which results in serious side effects and significant costs to patients and the healthcare system. A once-daily injectable form of PTH (1-84), marketed as Natpara ® , has been approved for the treatment of hypoparathyroidism; however, Natpara is currently the subject of an FDA recall and is not currently avaialble. Our lead product candidate for hypoparathyroidism, EB612, is delivered orally and can be administered in customized doses several times a day. Studies performed by researchers at the National Institutes of Health, or NIH, have shown that dosing PTH multiple times per day significantly increases the efficacy of therapy and may be more effective for treating hypoparathyroidism. These studies found that the total daily PTH dose required to maintain serum calcium in the normal or near-normal range was reduced by 50% with twice-daily PTH (1-34) and also demonstrated that twice-daily dosing achieved better control over serum calcium and urinary calcium excretion as compared to once-daily dosing. In addition, based on the market research we conducted in osteoporosis, we believe patients generally prefer orally-administered drugs. For these reasons, we believe EB612 dosed two or more times during the day may be clinically superior to the existing daily therapy and has the potential to become the standard of care, if approved, for hypoparathyroidism.
1
In 2015, we successfully completed a Phase 2a trial for EB612. Although our Phase 2a trial involved a smaller number of patients, was conducted for a shorter duration and did not include an initial dose optimization period, in each case in comparison to the design of the pivotal trial used for regulatory approval of Natpara (the REPLACE trial), our trial showed the potential for similar efficacy. In the third quarter of 2019, we reported the results of a second Phase 2 clinical trial that included one day of dosing with EB612 to evaluate the pharmacokinetic/pharmacodynamics, or PK/PD, profile of various EB612 dose regimens compared with Natpara. The results from this study demonstrated that EB612 was effectively delivered into the blood stream and activated PTH-dependent biological pathways that are inadequately activated in patients with hypoparathyroidism. In addition, the various dosing regimens demonstrated positive impacts on serum calcium, urine calcium and serum phosphate levels. No serious adverse events were reported. We have developed an improved formulation of EB612 based on new intellectual property and optimization of the PK profile for hypoparathydoidism and are evaluating this in preclinical and human PK/PD studies in 2022. These data will help determine the design of a pivotal Phase 2b or Phase 3 trial of EB612 in patients with hypoparathyroidism in which the dose frequency would be titrated to control hypocalcemia, normalize serum phosphate and reduce renal calcium excretion.
In the future, after the completion of additional formulation and development activities, we expect to initiate a multi-site Phase 2b/3 clinical trial of EB612 for the treatment of hypoparathyroidism, which will further evaluate the dosage, effectiveness and safety profile of EB612 in an expanded population of patients with hypoparathyroidism. We expect that this Phase 2b/3 trial, when initiated, will be designed to replicate the REPLACE trial in many aspects and to achieve a significant reduction in urinary calcium. The phase 2b/3 clinical trial of EB612 in hypoparathyroidism may potentially support a submission for regulatory approval of EB612, if successful.
In addition to the utilization of our technology to develop our own internal drug candidates, we intend to use our technology as a platform for the oral delivery of other novel protein and large molecule therapeutics. We believe our proprietary technology has advantages over alternative delivery options, and may enable us to create a potential pipeline of products across a range of therapeutic indications. We have generated data on a number of additional proteins and peptides in molecules as large as 150 kilodaltons, or kDa, and may develop these candidates further internally, or explore potential business development collaborations to advance these therapies through clinical development and generate funding.
In December 2018, we entered into a research collaboration and license agreement with Amgen, Inc, or Amgen. Under the agreement, we and Amgen have agreed to collaborate on the development and discovery of clinical candidates in the field of inflammatory disease and other serious illnesses. Specifically, we and Amgen have agreed to use our proprietary drug delivery platform to help Amgen develop oral formulations for up to three large molecule drug candidates within Amgen’s pipeline. Further, under the terms of the agreement, we have agreed to conduct preclinical development activities, at Amgen’s expense, and Amgen will be responsible for research, clinical development, manufacturing and commercialization of any of the resulting programs, at its expense. We will be eligible to receive from Amgen aggregate payments of up to $270 million upon achievement of various clinical and commercial milestones or Amgen’s exercise of its option to select up to two additional programs to include in the collaboration, as well as tiered royalty payments based on percentages ranging from the low to mid-single digits based on the level of Amgen’s net sales of any applicable products, if approved. We will retain all intellectual property rights to our drug delivery technology, which under this collaboration will be licensed to Amgen exclusively for Amgen’s selected drug targets. Amgen will retain all rights to its large molecules, including any subsequent improvements.
In February 2021, we announced that we initiated a new research program for an oral glucagon-like peptide-2 (GLP-2) analog based on the Company’s platform technology. GLP-2, a peptide produced in the intestine and the central nervous system via the brainstem and hypothalamus, is known to enhance intestinal absorption, specifically the increased absorption of nutrients. The only GLP-2 analog currently on the market, teduglutide, was approved in 2012 as a once daily injection for the treatment of short bowel syndrome in the United States and Europe, registering global sales of $613 million in 2020. In preclinical models, our oral formulation of a GLP-2 analog has shown a comparable pharmacokinetic profile to a subcutaneous injection. In addition, GLP-2 analogs are an important category of new therapies for many metabolic diseases and therefore we believe this product candidate is well positioned for partnering opportunities.
2
Our Pipeline
Drug development globally has shifted towards the use of biologics such as peptides, proteins and other large molecules for the treatment of various diseases including orphan indications. For example, approximately 30% of the drugs approved by the FDA between 2015 and 2019 were biologics. Currently, most large molecule therapeutics can be delivered only via injections and other non-oral pathways because oral administration typically leads to poor absorption into the blood stream, as well as enzymatic degradation within the gastrointestinal tract. Oral drug delivery has the potential to reduce the treatment burden by providing a more patient-friendly alternative relative to injectable drugs and may provide significantly more flexibility, both in size and number of doses per day, than injectable drugs. Our proprietary oral drug delivery technology is designed to address the issues of poor absorption, high variability, and difficulties delivering such large molecules to the targeted location in the body by utilizing a combination of a synthetic absorption enhancer, to facilitate the enhanced absorption of large molecules, and protease inhibitors to prevent enzymatic degradation.
We have initially focused on the development of products which are based on previously approved therapeutic agents. We believe this will allow us to more efficiently and predictably advance product candidates through the development cycle based on well-defined clinical and regulatory pathways. We have conducted initial feasibility studies with a number of candidates and intend to commence preclinical and clinical development for our next, non-PTH product candidate in 2022.
The following chart summarizes the current stage of development of each of our current product candidates, as well as their indications.
Our Strategy
Our goal is to become a leading biopharmaceutical company focused on the development and commercialization of orally delivered large molecule therapeutics in indications with significant unmet medical needs. The key elements of our strategy to achieve this goal are to:
• Advance EB613, potentially the first oral anabolic drug into Phase 3 for the treatment of osteoporosis : We successfully completed and reported the results of the randomized, double-blind, placebo controlled dose ranging Phase 2 clinical trial of EB613 for the treatment of osteoporosis. The results of the Phase 2 study support the selection of the 2.5 mg dose for a pivotal Phase 3 study. We are planning to initiate a Phase 3 (potentially pivotal) trial in 2022.
3
• Advance EB612 through clinical development for the treatment of hypoparathyroidism : To date we have completed two Phase 2 clinical trials of EB612 for the treatment of hypoparathyroidism. We reported positive results from the first trial in the third quarter of 2015, and then conducted a Phase 2 PK/PD trial in 2019 to evaluate the profile of various EB612 dose regimens. After the completion of additional formulation and development activities to determine our final formulations, and subject to available funds, we expect to initiate a Phase 2b/3 clinical trial of EB612 for the treatment of hypoparathyroidism. The FDA and the European Medicines Agency, or EMA, have granted EB612 orphan drug designation for the treatment of hypoparathyroidism.
• Establish global and regional commercial partnerships, or selectively develop commercial capabilities for our lead oral PTH product candidates : For our oral PTH product candidates that target orphan indications (EB612 for hypoparathyroidism and GLP-2 for short bowel syndrome), we may determine to retain commercialization rights within key territories, including the United States, because of the ability to commercialize efficiently with a small sales and marketing organization. For product candidates that target indications with larger patient populations, such as osteoporosis, we may choose to partner with larger biopharmaceutical companies ahead of late stage development and commercialization, license our technology to third parties for additional indications or seek other potential collaborations. We are currently building a corporate and business development capability to determine the appropriate development and commercial strategies for our current and future product candidates.
• Leverage our technology to develop more effective novel large molecule therapeutics through collaborations with other biotechnology or pharmaceutical companies : Oral drug delivery lowers the treatment burden on patients relative to injectable drugs, leading to higher patient and physician acceptance and compliance, and at a lower cost to patients. However, certain peptides, proteins and other large molecule therapeutics can currently be delivered only via injections and other non-oral pathways because oral administration leads to negligible absorption into the blood stream as well as enzymatic degradation within the gastrointestinal tract. In December 2018, we entered into a research collaboration and license agreement with Amgen, and we intend to explore additional collaborations to further validate our technology and potentially generate value through funding from such collaborations. COVID-19 may impact our ability to conduct research and development activities or to develop data that may lead to potential future collaborations (see “Item 1A. Risk Factors—Risks Related to Our Business and the Development of Our Product Candidates—The COVID-19 pandemic could adversely affect our business, financial condition, and results of operations.”).
• Identify and develop additional products based on FDA-approved injectable large molecule therapeutics : We intend to leverage our technology platform by applying it to the development of known large molecule therapeutics, and we believe we can reduce the development and regulatory risks by working on FDA-approved large molecule therapeutic agents with known mechanisms of action. We believe this will allow us to advance our product candidates efficiently and predictably through the development cycle thereby offering us the option either to develop these products on our own or to collaborate with the companies that originally developed the injectable form of the drug. For example, in February 2021, we announced that we initiated a new research program for an oral glucagon-like peptide-2 (GLP-2) analog based on the Company’s platform technology.
Our Technology
We are focused on the development and commercialization of product candidates that leverage our proprietary platform technology for the oral delivery of large molecule therapeutics. In recent years, drug development has shifted towards the use of peptides, proteins and other large molecules for the treatment of various diseases. By lowering the treatment burden on patients, oral drug delivery leads to higher patient and physician acceptance. In addition, oral drug delivery provides significantly more flexibility, both in size of dose and number of doses per day, than injectable drugs, which are frequently administered by preset injection pen and only once per day. Oral tablets are also less costly to manufacture than injectable biologics, which we expect will lower the cost of our therapies to patients, thereby expanding access to a greater population of patients who can afford these therapies.
Historically, peptides, proteins and other large molecule therapeutics have typically been delivered via injections and other non-oral pathways because oral administration leads to poor absorption into the blood stream (bioavailability) due to enzymatic degradation within the gastrointestinal tract and poor permeability though the intestinal wall. Most oral drug delivery technologies attempting to overcome this hurdle only manage to attain very low bioavailability (less than 1%), which generally results in high variability of dose exposure, both between patients and within the same patient at different times of administration. These variability issues are due to the fact that small changes in the level of absorption lead to significant changes in the bioavailability. As a result, absorption variability generally decreases as drug bioavailability increases. Oral formulations of large molecules must therefore ensure that the large molecule is able to pass through the intestinal wall so that it can be absorbed into the bloodstream and that the large molecule therapeutic is not exposed to enzymatic degradation in order to protect its biological activity and availability for absorption.
4
Our proprietary technology is designed to address both of these issues by utilizing a combination of a synthetic absorption enhancer, or carrier molecule, to facilitate the enhanced absorption of large molecules, and protease inhibitors to prevent enzymatic degradation. By designing our product candidates to address both the issues of absorption and degradation, we have been able to significantly increase bioavailability and decrease the variability of the PTH dose delivered in our clinical trials to date. Our carrier molecule is designed to create a weak association with our chosen large molecule therapeutic agents, leaving the therapeutic agent chemically unmodified. The carrier molecule enables transport across the intestinal membrane via transcellular absorption without compromising the integrity of the intestinal wall. Because of the weak association between the carrier molecule and the therapeutic agent, the interaction is designed to be reversible and occurs spontaneously by simple dilution on entering the blood. We select protease inhibitors that act by specifically inhibiting a number of gastrointestinal enzymes designed to assist in the degradation and digestion of proteins without interfering with normal gastrointestinal activity.
In order for large molecule therapeutics to benefit from the use of our oral delivery technology, they must demonstrate a number of specific characteristics, including:
• having the appropriate size, as measured by molecular weight, and other chemical/physical characteristics;
• having a mechanism of action that favors delivery through the gastrointestinal tract rather than through injections; and
• having a dosing schedule that requires dosing one or more times per day for at least three months.
Based on these criteria, we chose to focus initially on product candidates related to oral delivery of PTH molecules, which have the potential for therapeutic use in a number of indications, including hypoparathyroidism and osteoporosis. We have also explored the use of our technology in other molecules such as a GLP-2 analog and a number of other macromolecules, up to approximately 150 kDa in size. We believe our platform technology has the potential for use in biologics, which represented approximately 30% of all FDA drug approvals between 2015 and 2021 and over $20 billion in annual sales across that same period.
We have entered into 5 ‘funded’ Material Transfer Agreements (“MTAs”) with other pharma and biotech companies to demonstrate the utility of Entera’s platform to orally deliver large molecules, where the third parties are paying for Entera’s costs. We believe the data generated from these MTA’s will be the basis for entering into licensing agreements that generate non-dilutive funding.
Our Product Candidates
The following table summarizes important information about our current oral PTH product candidates, including their respective indications and current stages of development. We have not out-licensed any intellectual property rights to our oral PTH product candidates listed below, and, therefore, have retained the ability to pursue their worldwide commercialization, or potential commercial collaborations.
Stage of
Program
Indication
Description
Development
Status
EB613
Osteoporosis
Oral PTH (1-34)
Phase 3
Phase 2 dose ranging clinical trial completed and final BMD results reported in Q2 2021
End-of-Phase 2 Meeting with FDA Dec 2021
Phase 3 initiation expected in 2022
EB612
Hypoparathyroidism
Oral PTH (1-34)
Phase 2
Phase 2a successfully completed (results reported 2015)
Phase 2b PK/PD clinical trial head to head with Natpara in hypoparathyroid patients results reported in Q3 2019
Improved formulation selected in Q4 2021
5
Oral PTH Therapeutics
PTH is a hormone that regulates the levels of calcium and phosphorus in the blood. The naturally occurring form of PTH that is found in the human body is composed of 84 amino acids, although only the first 34 amino acids are believed to be responsible for its biological effects. A recombinant injectable form of PTH that is composed of only the first 34 amino acids, or PTH (1-34), is used as a treatment for a number of indications, including hypoparathyroidism, osteoporosis and non-union fractures. A subcutaneous injectable form of human PTH (1-34), marketed under the name Forteo ® , has been approved in the United States since 2002 and has been used by more than one million patients for the treatment of osteoporosis. An injectable form of full length human PTH (1-84), marketed under the name Natpara ® , has been approved for the treatment of hypoparathyroidism, but it is currently the subject of an FDA recall. We are developing multiple oral formulations of PTH (1-34) that can be used for a number of proposed indications. We believe that our oral PTH product candidates, EB613 and EB612, if approved, have the potential to become the standard of care for patients with osteoporosis, hypoparathyroidism and non-union fractures.
PTH regulates calcium and phosphate homeostasis and bone metabolism in the body. In normal healthy individuals, PTH is generally produced at very low basal levels that produce a blood concentration of 15 - 25 pg/mL. On top of the basal PTH levels, there are physiological pulses two to three times per day that result in transient increases in PTH levels reaching up to 65 pg/mL. The changes in PTH secretion are in response to ionized calcium concentration in blood plasma that result from the entry of calcium from nutrients in the intestine and resorption of calcium from bone. The pulses help encourage bone turnover through activation of both osteoblasts and osteoclasts, which are the two main types of cells that are responsible for the process through which bones are remodeled. In the absence of adequate parathyroid function producing these pulses in response to decreasing blood calcium, it is difficult for the body to regulate normal homeostatic processes.
EB613 for Osteoporosis
Osteoporosis
We are developing an oral PTH program, EB613, for the treatment of osteoporosis. Osteoporosis is a systemic skeletal disease characterized by low bone mass, deterioration of the microarchitecture of bone tissue and increased bone fragility and susceptibility to fracture. It most commonly affects older populations, primarily postmenopausal women. All bones are subject to an ongoing process of formation and degradation, whereby bone tissue is removed from the skeleton and new bone tissue is formed. Two main types of cells are responsible for this process: osteoclasts, which break down bone tissue; and osteoblasts, which secrete new bone tissue. In healthy individuals, bone resorption is matched by new bone formation. Osteoporosis develops as the delicate balance between bone resorption by osteoclasts and bone formation by osteoblasts is not maintained, and not enough bone tissue is formed, leading to frail and fracture-prone bones. Moreover, in many types of osteoporosis, the overall rate of bone turnover is accelerated, increasing the rate of bone loss. The weak and brittle bones become susceptible to fractures caused by fall, mild stress or even a cough that would cause no harm to normal bones. The complications of fractures and treatment in frail elderly individuals can in limited instances be fatal (for example, due to pulmonary embolism, pneumonia or urosepsis).
Osteoporosis often leads to loss of mobility, admission to nursing homes and dependence on caregivers resulting in substantial costs to the healthcare system. The prevalence of osteoporosis is growing due to the aging of populations in developed countries, and, according to the National Osteoporosis Foundation, or NOF, is significantly under-recognized and under-treated. While the aging of the population is a primary driver of an increase in prevalence, osteoporosis is also increasing from the use of drugs that induce bone loss, such as the chronic use of glucocorticoids and aromatase inhibitors that are increasingly used for the treatment of breast cancer and the hormone deprivation therapies used for the treatment of prostate cancer.
Market opportunity
The NOF has estimated that over eight million women in the United States already have osteoporosis and another approximately 44 million may have low bone mass, placing them at increased risk for osteoporosis. In U.S. women 55 years of age and older, the hospitalization burden of osteoporotic fractures and population facility-related hospital cost is greater than that of myocardial infarction, stroke, or breast cancer. Furthermore, the NOF expects that the number of fractures in the United States due to osteoporosis will rise to three million by 2025, resulting in an estimated $25.3 billion in costs each year. Worldwide, osteoporosis affects an estimated 200 million women according to the International Osteoporosis Foundation, or IOF, and causes more than 8.9 million fractures annually, which is equivalent to an osteoporotic fracture occurring approximately every three seconds. The IOF has estimated that 1.6 million hip fractures occur worldwide each year, and by 2050 this number could reach between 4.5 million and 6.3 million. The IOF estimates that in Europe alone, the annual cost of osteoporotic fractures could surpass €76 billion by 2050.
6
Limitations of current treatments for osteoporosis
The goal of pharmacological treatment of osteoporosis is to maintain or increase bone strength, to prevent factures and to minimize osteoporosis-related morbidity and mortality caused by fractures throughout the patient’s life. Current treatments for osteoporosis generally fall into two categories: antiresorptive medications that prevent bone loss but do not restore normal bone mass; and anabolic medications that increase the rate of bone formation, and, at least in part, restore lost bone. The global osteoporosis drug market was dominated for many years by bisphosphonates that inhibit bone resorption, although bisphosphonates’ market share in the United States has declined over recent years due to fear of the occurrence of rare but potentially serious side effects. In addition, anabolic drugs like Forteo (human PTH (1-34)), and abaloparatide (Tymlos ®) which is a synthetic PTH receptor agonist, have become more frequently used. Both of these drugs are taken via subcutaneous injection and are used for only one to two-year periods with patients subsequently transitioned to an antiresorptive drug. More recently, the market has seen the introduction of newly developed pharmacological treatments that also inhibit bone resorption, including the RANK-ligand inhibitor denosumab (Prolia ®) and the anti-sclerostin antibody, romosozumab (Evenity®)
The primary current treatments for osteoporosis are summarized in the table below:
Class of Drug
Name
(Producer)
Method of Action
Known Side Effects
2020
Branded
Sales
(in millions)
Injectable PTH
Forteo (Eli Lilly)
Increases bone mineral density by, increasing bone formation.
Decrease in blood pressure, increase in serum, calcium in the blood; nausea, joint aches, pain, leg cramps, injection site reactions
$1,046
Monoclonal antibody
Prolia (Amgen)
Blocks bone resorption by osteoclasts by binding RANK-L a protein that is essential to activate osteoclasts
Hypocalcemia, serious infections, dermatologic adverse reactions, osteonecrosis of the jaw, atypical femoral fractures, back pain, pain in extremity, musculoskeletal pain, hypercholesterolemia, and cystitis
$2,763
EVENITY ® (Amgen)
Increases bone formation and, to a lesser extent, decreases bone resorption by inhibiting the action of sclerostin, a regulatory factor in bone metabolism. Note: limited duration of use to 12 monthly doses.
Heart attack, stroke, Hypersensitivity reactions, including angioedema, erythema multiforme, dermatitis, rash, and urticaria; hypocalcemia; osteonecrosis of the jaw; atypical femoral fracture;
$350
Injectable abaloparatide
Tymlos (Radius Health)
Similar to PTH, binds to PTH receptors and results in bone formation and increased bone mineral density
Osteosarcoma, Orthostatic hypotension, hypercalcemia, hypercalciuria, dizziness, nausea, headache, palpitations, fatigue, upper abdominal pain and vertigo
$219
Bisphosphonate
Fosamax (Merck)
Prevent bone loss by inhibiting osteoclasts. Effects reversible at low doses but high intravenous causes apoptosis.
Irritation of the gastrointestinal mucosa, hypocalcemia, severe musculoskeletal pain, osteonecrosis of the jaw, atypical femoral fractures
N/A
Actonel, Boniva
(Generic)
Zometa (IV)
(Novartis)
In osteoporosis patients, who have normal basal levels of PTH, therapeutic administration of PTH initially activates osteoblasts, but eventually activates osteoclasts after several months of treatment. While both types of cells are activated when PTH is administered, osteoblasts are activated to a greater extent, increasing net bone formation and bone mass. Injectable PTH (1-34), in the form of Eli Lilly’s Forteo, is therefore one of the most effective osteoporosis medications on the market today and demonstrably more efficacious in reducing the risk of spine fractures than bisphosphonates. Forteo is particularly advantageous in glucocorticoid-induced osteoporosis, a known side effect of drugs like prednisone. A study published in the New England Journal of Medicine found that, over a period of 18 months, BMD in the lumbar spine in a group of patients with glucocorticoid-induced osteoporosis treated with Forteo increased twice as much as that in the group treated with a bisphosphonate.
7
Unlike our oral delivery system, Forteo is administered by subcutaneous injection, which has significant drawbacks, including the discomfort and local irritation associated with a daily injectable regimen. Additionally, subcutaneous injection of Forteo has been shown to induce antibodies to the drug in approximately 3% of the patient population. Based on our market research, we believe an oral form of PTH (1-34) would significantly improve patient and physician acceptance. We also believe that the desire for a more patient friendly route of administration is why Eli Lilly has evaluated several collaborations with developers of alternative delivery systems, including a micro needle patch system and an intranasal delivery system. However, these collaborations have yet to result in a successful commercial product. While a patch technology may reduce the discomfort associated with an injection, we believe patients will prefer an oral form of PTH (1-34) over a patch form of delivery. In addition, several pharmaceutical companies have previously attempted to develop an orally administered form of PTH, but none have been successful to date due to issues including variability and low bioavailability.
Other oral delivery technologies for the treatment of osteoporosis
We believe that our oral delivery technology is superior to other oral peptide delivery technologies that were and still may be in development for osteoporosis patients. The table below presents a comparison and integration of available clinical trial results to date:
Company/Technology
Molecule
API MW (g/mole)
Bioavailability (F)
Entera Bio
PTH (1-34)
4118
1.5%
Novartis/Emisphere (Eligen - CNAC) (1)
PTH (1-34)
4118
0.2 - 0.5%
Enteris Biopharma - Unigen (Peptelligence) (2)
PTH (1-31)
3719
0.52%
Multiple manufacturers (3)
Desmopressin
1069
0.16%
Chiasma (TPE) (4)
Octreotide
1019 (Cyclic peptide)
0.67%
Proxima Concepts (AXCESS) (5)
Insulin
5733
0.7%
(1)
Source: The single dose pharmacokinetic profile of a novel oral human parathyroid hormone formulation in healthy postmenopausal women Sibylle P. Hämmerle, et al. Bone. 2012 Apr;50(4):965-73. doi: 10.1016/j.bone.2012.01.009. Epub 2012 Jan 25.
(2)
Source: Pharmacokinetics of oral recombinant human parathyroid hormone rhPTH (1-31)NH2 in postmenopausal women with osteoporosis. Sturmer A1 et el. Clin Pharmacokinet. 2013 Nov;52(11):995-1004. doi: 10.1007/s40262-013-0083-4.
(3)
Source: Public Assessment Report, Desmopressin Acetate 100 Microgram Tablet PL 24668/0177 and Desmopressin Acetate 200 Microgram Tablet PL 24668/0178. Medicines and Healthcare Products Regulatory Agency.
(4)
Source: Pharmacokinetic Modeling of Oral Octreotide (Octreolin™) in Healthy Volunteers and Dosing Regimen Optimization for Acromegaly Patients. Shmuel Tuvia et al. Endocrine Society’s 94th Annual Meeting June 2012, OR29-6-OR29-6. Source: The glucose lowering effect of an oral insulin (Capsulin) during an isoglycaemic clamp study in persons with type 2 diabetes S. D. Luzio et al. Diabetes Obes Metab. 2010 Jan;12(1):82-7. doi: 10.1111/ j.1463-1326.2009.01146.x. Epub 2009 Sep 25.
Preclinical and Clinical Development of EB613
In multiple clinical trials conducted to date, more than 260 subjects have received formulations of EB613. Furthermore, in these trials, EB613 exhibited no serious drug related adverse events and displayed compelling PK and PD properties although different than the published data from Forteo and other PTH products. Adverse events across all trials in subjects receiving EB613 were consistent with those seen in other clinical trials of PTH and included: mild hypercalcemia; tachycardia; and headache. Other adverse events observed were typical of those observed in the placebo groups of our studies and other clinical trials, and included anemia, musculoskeletal and connective tissue event of knee cramps, nausea, muscle aches, and dizziness.
8
Completed Phase 2 Trial and Planned Clinical Development
Developers of osteoporosis drugs that contain new chemical entities are required to conduct extensive clinical studies that employ an endpoint that measures the reduction in fractures. These trials often require thousands of patients over a multi-year period, and typically cost hundreds of millions of dollars. However, once fracture risk reduction has been demonstrated, the FDA and other regulatory agencies have allowed new formulations or treatment regimens of the same active ingredient to be approved using BMD as the primary efficacy endpoint under the 505(b)(2) regulatory pathway in the United States or the comparable regulation in other countries. In November 2018, we held a pre-IND meeting with the FDA to discuss our development plan for oral PTH for the treatment of osteoporosis and in December 2020, we announced that the FDA had accepted the IND submission for EB613. After successful completion of the Phase 2 dose ranging study of EB613, we held an end-of-Phase 2 meeting with FDA to discuss various aspects of the nonclinical and clinical development plan, the meeting focused on the potential use of BMD, rather than fracture incidence, as the primary endpoint to support a new drug application, or NDA.
In July 2019, we initiated a six-month Phase 2 trial of EB613 in Israel with a target enrollment of 160 subjects. The Phase 2 clinical trial was designed to evaluate both the safety of EB613 and to identify the optimal dose that we will select to advance into a single Phase 3 pivotal trial. Based on the pre-IND meeting and the interim data from the Phase 2 trial of EB613, we submitted an IND for EB613 to the FDA in November 2020. In December 2020, we announced that the FDA had reviewed our IND application for EB613 and informed us that we may proceed with our proposed U.S. clinical trial.
The Phase 2 clinical trial of EB613 was a dose-ranging, placebo-controlled study in postmenopausal female subjects with osteoporosis or low BMD conducted at four leading medical centers in Israel. The trial evaluated BMD, multiple bone markers, including P1NP and Osteocalcin - bone formation markers, CTX – a bone resorption marker, and various safety endpoints. We completed enrollment in this trial in November 2020 upon the randomization of the 161st subject. The demographics for the EB613 Phase 2 clinical trial such as age, body mass index, or BMI, and baseline levels of bone markers were generally consistent with demographics from comparable osteoporosis studies.
N
Mean
Median
Age
161
61
61
Weight (Kg)
161
67
66
BMI
161
26
26
9
The 6-month Lumbar Spine BMD change from baseline (mean, standard error) are summarized below:
In March 2021, we announced complete 3-month biomarker data from this trial. The complete 3-month results from the trial showed a significant increase in the P1NP biomarker in the 2.5 mg dose group after 3 months of treatment (P <0.04) as compared to placebo. The change in P1NP at 3-months was the primary endpoint the Phase 2 trial. Similar to the increase in P1NP, a significant increase in Osteocalcin was also observed in the 2.5 mg group after 3 months (P <0.01). In line with a potential anabolic effect, a significant decrease in CTX was observed after 3 months and 6 months of treatment (P <0.015). The decrease in CTX taken together with the increase in P1NP and Osteocalcin would indicate a potential positive impact on BMD.
Biomarker data from the Placebo and EB613 2.5mg dose group are summarized below:
• A significant increase in P1NP from baseline versus placebo at month 3 (P <0.04) as well as significant increases at months 1 (P <0.0001) and 2 (P <0.003);
• A significant increase in Osteocalcin from baseline versus placebo at month 3 (P<0.006) as well as significant increases at months 1 (P<0.0001) and 2 (P<0.0001);
• A significant decrease in CTX from baseline versus placebo at month 3 and month 6 )both timepoints, P <0.015 versus placebo) as well as a significant decrease at month 1 (P <0.001)
Study medication, EB613 or placebo was generally well tolerated through 6 months of treatment. Common adverse events resembled those known to be associated with teriparatide by subcutaneous injection including dizziness, headache, palpitations, and nausea. There were no adverse events that were severe in intensity in any treatment group and no serious drug-related adverse events.
10
Conclusions from this Phase 2 study of postmenopausal women with osteoporosis or low BMD that included six months of treatment with oral PTH 2.5 mg, included:
• Increased lumbar spine, femoral neck and total hip BMD compared to placebo, and compared to start of treatment;
• The increase in spine BMD was similar in magnitude to that previously reported with Forteo Ò ;
• Increases in total hip and femoral neck were greater than those previously reported with Forteo Ò ;
• Reduced serum CTX compared to placebo;
• Adverse event profile similar to that observed with Forteo Ò , and typical of orthostatic hypotension;
• Was not associated with serum calcium increases or Hypercalcemia adverse events; and
• Greater than 90% of subjects tolerated the 2.5 mg dose well, after titration starting with the 1.5 mg, and progressing through 2.0 mg doses,
The results of the Phase 2 study supported the selection of the 2.5 mg dose for the pivotal Phase 3 study. The six-month increases in BMD with the 2.5 mg dose position EB613 as potentially the first oral anabolic treatment.
We are also conducting several nonclinical safety assessment studies to support our regulatory filings and to enable the start of a Phase 3 clinical trial in 2022 using sites in the United States, Israel, Europe and other territories. See “Item 1A. Risk Factors—Risks Related to Our Business and the Development of Our Product Candidates—The COVID-19 pandemic could adversely affect our business, financial condition, and results of operations.”
EB612 for Hypoparathyroidism
Hypoparathyroidism
Our product candidate for hypoparathyroidism, EB612, is an oral formulation of PTH (1-34). We believe that EB612, if approved, has the potential to become the standard of care for hypoparathyroidism. Hypoparathyroidism is a rare condition in which the parathyroid glands fail to produce sufficient amounts of PTH. In addition, there are rare genetic diseases where mutations in the PTH gene results in PTH that lacks biologic activity. Individuals with a deficiency of parathyroid hormone may exhibit hypocalcemia and hyperphosphatemia. Hypocalcemia can cause one or more of a variety of symptoms, including weakness, muscle cramps, excessive nervousness, headaches and uncontrollable twitching and cramping spasms of muscles such as those of the hands, feet, arms, legs and face, which is known as tetany. Numbness and tingling around the mouth and in the fingers and toes can also occur. Acute hypocalcemia can result in cardiac failure, failure of nervous system functions and death. Hyperphosphatemia can result in soft tissue calcium deposition, which may lead to severe issues, including damage to the circulatory and central nervous systems. The most common cause of hypoparathyroidism is damage to, or removal of, the parathyroid glands due to surgery for another condition. Hypoparathyroidism can also be caused by autoimmune process idiopathic reasons or occur in association with a number of different underlying disorders. In rare cases, hypoparathyroidism may occur as a genetic disorder where mutations in the PTH gene results in the production of PTH that lacks biologic activity.
Market opportunity
The prevalence of hypoparathyroidism is estimated to be 37 per 100,000 persons in the United States, with 70% of cases caused by surgery, 8% due to genetic disorder and 7% due to idiopathic origin. Although incidence rates have been difficult to quantify, it is estimated that chronic hypoparathyroidism, which affects patients for more than six months, affects approximately 58,700 insured individuals in the United States, with an estimated 43% of these chronic cases characterized as mild, 39% characterized as moderate, and 18% characterized as severe. The FDA has granted orphan drug designation to our oral PTH for the treatment of hypoparathyroidism.
Limitations of current treatments for hypoparathyroidism
Historically, the treatments for hypoparathyroidism have been calcium supplements, vitamin D supplements and phosphate binders. Although calcium and vitamin D can help alleviate hypocalcemia, their chronic use results in many serious side effects with significant costs to the healthcare system. Hypoparathyroid patients often need to take large doses of calcium throughout the day in order to maintain serum calcium near the lower limit of the normal range. Moreover, ordinary vitamin D is generally insufficient as the body cannot produce adequate quantities of 1,25-dihydroxyvitamin D, the active hormone derived from vitamin D. Drugs like calcitriol and alfacalcitol must be prescribed to stimulate calcium absorption. If excess calcium is absorbed, it then falls upon the kidneys to dispose of excess calcium. Endogenous PTH normally regulates renal calcium excretion, but this regulation is defective in patients with hypoparathyroidism. Over many years of treatment, kidney stones may develop, and ultimately kidney failure may occur due to either kidney stones or deposition of calcium phosphate in kidney tissue (called nephrocalcinosis). Despite the use of calcium and vitamin D supplements and other medications, many patients with hypoparathyroidism continue to experience physical and cognitive symptoms.
11
Until recently, hypoparathyroidism was the only hormonal insufficiency state that did not have an approved hormone replacement therapy. Natpara, which is administered once daily with a pre-set injection pen, was approved by the FDA and launched commercially in the United States in 2015. Natpara was originally developed by NPS Pharmaceuticals, Inc., which was acquired by Shire plc in 2015 and is now a part of Takeda Pharmaceuticals, as a result of its 2019 acquisition of Shire. Natpara is a recombinant form of human PTH (1-84) that was developed as an injectable hormone replacement therapy for the underlying cause of hypoparathyroidism, which is a lack of PTH. In the FDA’s advisory committee meeting for Natpara, a number of observations were highlighted, including that Natpara had limited clinical benefit in controlling excessive calcium in the urine, or hypercalciuria, a condition commonly associated with hypoparathyroidism and the most commonly identifiable cause of calcium kidney stone disease. Additional analysis by the FDA also noted that, due to a change in trial protocol that was made after the initiation of the trial, the responder rate for the pivotal single-dose trial’s primary efficacy endpoint was 32.1% under the original trial protocol versus the 54.8% that was ultimately reported. The FDA stated in its briefing report that the results of this alternate analysis may be more clinically relevant, particularly if a clinician’s goal is to keep a patient’s serum calcium in the lower half of the normal range.
EB612 for the treatment of hypoparathyroidism
We believe EB612 may offer several advantages over Natpara for the following reasons:
• EB612 is designed to be dosed multiple times a day . Studies performed by the NIH have shown that dosing PTH multiple times per day significantly increases the efficacy of therapy and would be more effective for treating hypoparathyroidism than a once-per-day regimen. These studies found that the total daily PTH dose required to maintain serum calcium in the normal or near-normal range was reduced by 50% with twice-daily PTH (1-34) and also demonstrated that twice-daily dosing achieved better control over serum calcium and urinary calcium excretion as compared to once-daily dosing.
• EB612 is designed to be dosed according to patient needs. The hypoparathyroid population is heterogeneous, and patients have highly variable responsiveness to PTH. Therefore, the ability to customize PTH dosing throughout the day with an oral tablet is an advantage over a once-daily preset injection pen.
• EB612 is expected to have fewer adverse events of hypercalcemia. Our planned treatment regimen would be increased gradually and in parallel to increases in serum calcium. As a result, calcium supplements and active vitamin D metabolites (e.g., calcitriol) would be reduced gradually, while maintaining a relatively stable level of serum calcium. This is in contrast with Natpara’s initially high dose, which requires an immediate reduction in supplements in anticipation of a rapid increase in serum calcium levels. Furthermore, this immediate and prolonged increase in serum calcium increases the risk of prolonged hypercalcemia compared to EB612. Moreover, the target serum calcium level would be the lower end of the normal range. If serum calcium were at, or greater than, the middle of the normal range, calcium supplements, active vitamin D metabolites and oral PTH dose would be reduced.
• EB612 can be administered in a more convenient manner. Natpara is administered by subcutaneous injection, must be stored under restrictive conditions (refrigeration required with no freezing or shaking) and has a multi-step preparation that must be performed every two weeks. EB612 will not require such additional preparations and will have no significant storage restrictions.
As a result of its dose flexibility and the generally greater patient acceptance of oral formulations, we believe EB612, if approved, will address a larger segment of the hypoparathyroid population than Natpara. For these reasons, we believe that EB612, if approved, has the potential to become the standard of care for patients with hypoparathyroidism.
12
To date, no oral PTH formulation has been successfully developed because PTH, like many other hormonally active peptides, degrades rapidly in the intestinal tract when taken orally. EB612 is a synthetic form of the first 34 amino acids of human PTH to which we have applied our proprietary technology. This technology permits oral administration, enabling more frequent dosing throughout the day and greater sensitivity and flexibility in dosing than injectable formulations of PTH. The carrier molecule and selection of protease inhibitors that are used in our technology are well-characterized and have been used in large clinical trials. We have attempted to optimize EB612 to enable the most cost effective and safest formulation while maintaining the required effect. These components, when used separately, have been shown to be safe in doses significantly higher than those used in the clinical trials for our current product candidates.
We believe that EB612 will have inherent advantages compared to injectable forms, including convenience of administration without any special preparation of the medication and convenience of storage (room temperature or refrigeration for long term storage). Additionally, based on the results of our preliminary studies, we believe that EB612 will have an enhanced clinical profile as compared to Natpara, with an additional positive effect on elevated urinary calcium, as well as reduced side effects. If our preliminary results are borne out in additional clinical trials, we believe this combination of advantages and long term clinical benefits will be compelling to both patients and physicians.
EB612 Hypoparathyroidism Clinical Trials
We demonstrated with earlier formulations of what now is EB613 a large body of evidence in Phase 1 studies, which included a Phase 1a clinical trial with multiple formulations of our oral PTH to evaluate safety and collect bioavailability and PK and PD data in 42 healthy volunteers, as well as in an extended Phase 1b clinical trial in an additional 30 volunteers to test a variety of manufacturing technologies with multiple formulations, administration parameters and dosing regimens of our oral PTH. These earlier data and oral PTH formulations led to several Phase 2 studies evaluating a number of EB612 formulations in hypoparathyroidism patients.
Phase 2a Clinical Trial
In 2015, we successfully completed a multicenter Phase 2a clinical trial of EB612 in hypoparathyroidism patients. This study demonstrated the safety and tolerability of EB612 administered four times daily for 16 weeks to patients with hypoparathyroidism. In this study, patients were titrated up to a maximum of 12 EB612 0.75 mg tablets a day (total daily dose of 9 mg) by the investigator, according to each subject’s albumin-adjusted serum calcium (ACa), and supplement treatment regimen. Of the 19 enrolled subjects, 17 completed the trial (of which 15 were per protocol). No drug-related serious adverse events were reported and most of the adverse events were not considered study drug-related.
The study achieved its primary and secondary endpoints, including a reduction in calcium supplements, reductions in serum phosphate and 24-hour urine calcium excretion, maintenance of ACa within the reference range, and an improvement in quality of life. Specific results of this trial included:
• A significant reduction of 42% (p=0.001) from baseline in median calcium supplement use;
• Maintenance of median ACa levels above the lower target level for HypoPT patients (>7.5 mg/dL) throughout the study;
• A rapid decline of 23% (p=0.0003) in median serum phosphate levels 2 hours following the first dose that was maintained within the normal range for the duration of the study;
• A notable median decrease of 21% (p=0.07) in 24-hour urine calcium excretion between the first and last treatment days; and
• An increase in quality of life score of 5% (p=0.03) from baseline by the end of the treatment period.
Based on a review of the clinical data presented in Natpara’s REPLACE trial and our Phase 2a results, we believe EB612 potentially provides a more favorable therapy for hypoparathyroidism patients than currently available therapies. Although our Phase 2a trial involved a smaller number of patients (N=15 vs. N=84 + 40 placebo), lasted for a shorter duration (four months vs. six months) and did not include a dose optimization period of ~2 - 16 weeks prior to treatment initiation, in each case as compared to the REPLACE trial, our results showed a greater absolute reduction in calcium supplements (1278 ±880mg vs. 1152 ±1219mg) while the patients’ albumin adjusted serum calcium increased slightly as opposed to a slight decrease in the REPLACE trial (baseline vs. end of treatment). The results of this trial were published in the Journal of Bone and Mineral Research in the first quarter of 2021.
13
Phase 2 PK/PD Clinical Trial
We initiated a two-part Phase 2 PK/PD trial in 2014. This trial was designed to provide a bridge from one of our completed Phase 2a trials, which was conducted prior to the marketing approval of Natpara, and our planned future clinical trials, and to also allow us to better understand the relative strength and dose of our product as compared to the marketed product, Natpara. This trial was also intended to provide valuable comparative data to Natpara that will further inform the design of a potential Phase 2b/3 clinical trial. The relevant endpoints for the PK/PD trial included an examination of levels of PTH (1-34), PTH (1-84) (Natpara), serum calcium, serum phosphate, urinary calcium and urinary phosphate.
In November 2018 we announced the completion of part I of this Phase 2 PK/PD trial to evaluate the PK/PD profile of various EB612 dose regimens, while comparing such various dose regimens with Natpara. In Part I of the trial, ten patients with hypoparathyroidism completed two three-day in-patient visits. Throughout each of these three-day visits, patients remained on their current standard medications. On the first day of each visit (baseline) patients received no additional treatments. On day two, patients were randomized to receive one of three treatments: EB612 twice a day (BID), four times a day (QID), or Natpara once a day (QD). On day three, patients did not receive any additional treatments. In the second three-day visit, patients were again randomized on day two to receive one of the treatment regimens they had not received previously. Throughout the three-day visits, patients were continuously monitored clinically, and PTH, calcium, phosphate, and the hormonal metabolite of vitamin D (1,25- dihydroxyvitamin D) levels were measured. PTH has several well-known physiological effects. It increases serum calcium, decreases serum phosphate, increases reabsorption of calcium in the kidney, where it also increases 1,25-dihydroxyvitamin D synthesis.
Results from Part 1 of the PK/PD trial of Oral PTH (1-34) (QID) treatment included: (i) an increase in the serum calcium by an average of approximately 0.3 mg/dL over baseline, with such increase maintained over a 24-hour period; (ii) a decrease in serum phosphate by an average of 0.5 mg/dL below baseline with such decrease maintained over a 24-hour period; (iii) an increase in average levels of serum active vitamin D of approximately 90% on the day of treatment as compared to baseline; and (iv) a decrease in average levels of 24-hour urinary calcium of approximately 30% on the day of treatment as compared to baseline. An initial analysis of the Part 1 data suggested that the QID regimen provided a greater effect on all of the parameters measured as compared to the BID regimen. The concentration of PTH (1-34) in blood after administration of Oral PTH (1-34) in the current trial was sufficient to produce the observed pharmacodynamic effects and did not induce hypercalcemia. No serious adverse events were reported in the trial.
The second and final part of this PK/PD trial evaluated a variety of dosing treatment regimens with a high and low dose of EB612 as well as Natpara with patients also receiving calcium supplements and either alfacalcidol or calcitriol. In September 2019, we presented the results of Part 2 of this PK/PD trial at the American Society for Bone and Mineral Research (ASBMR) Annual Meeting. The trial conclusions noted that EB612 2.25 mg QID for one day is associated with an increase in serum albumin-corrected calcium and 1,25(OH)2D (1,25-dihydroxyvitamin D), a decrease in serum phosphate, and a decrease in urinary calcium in patients with hypoparathyroidism. EB612 produced similar biological effects to Natpara 100 µg QD, the highest dose of hPTH (1-84) currently indicated for use in patients with hypoparathyroidism, on serum calcium, phosphate and vitamin D. Additionally, EB612 resulted in a decrease in urinary calcium. These changes in serum PD parameters were sustained over the 24-hour period of observation from time zero. BID, TID and QID regimens showed a dose-dependent increase in 1,25(OH)2D indicating that the long-term treatment, even with the less frequent dosing regimens, may be an effective treatment option for those patients suffering from less severe hypoparathyroidism. Furthermore treatment with Oral hPTH (1-34) dosed at multiple times during the day has the potential to reduce calciuria generally associated with maintenance of serum calcium within the normal range using calcium supplements and calcitriol analogs alone. There were no treatment-emergent adverse events of hypercalcemia, as well as no treatment-emergent serious adverse events reported in the trial.
Planned Additional Clinical Development and Regulatory Pathway
After the completion of additional formulation and development activities to inform our final formulations, and subject to available funds, we expect to initiate a Phase 2b/3 clinical trial of EB612 for the treatment of hypoparathyroidism, which will further evaluate the dosage, effectiveness and safety profile of EB612 in an expanded population of patients with hypoparathyroidism conducted at multiple trial sites. We expect that this Phase 2b/3 trial, when initiated, will be designed to replicate the REPLACE trial in many aspects and to achieve a significant reduction in urinary calcium. The phase 2b/3 clinical trial of EB612 in hypoparathyroidism, if successful, may potentially support a submission for regulatory approval of EB612.
14
The Phase 2b/3 trial will likely be designed as a placebo controlled trial with a “rescue” provision for patients who have substantial persistent symptoms, hyperphosphatemia, hypocalcemia or hypercalciuria. The planned primary endpoints will be the proportion of patients obtaining a serum calcium and phosphate within a “target” range, reducing hypercalciuria and from a safety perspective, the incidence of clinically important hypercalcemia and decreased renal function adverse events. The trial will also compare the reduction in calcium intake, reduction in active vitamin D in each treatment group. Secondary endpoints include mean absolute levels of serum calcium and serum phosphate.
In April 2014, we received orphan drug designation from the FDA for our oral PTH in hypoparathyroidism. If a product receives the first FDA approval of that product for the indication for which it has orphan designation, the product is entitled to orphan drug exclusivity, which means that FDA may not approve any other application to market the same drug for the same indication for a period of seven years, except in limited circumstances, such as a showing of clinical superiority over the product with orphan exclusivity or where the manufacturer is unable to assure sufficient product quantity. In January 2015, the FDA approved Natpara, an injectable form of PTH, for hypoparathyroidism, and awarded Natpara orphan drug exclusivity until January 23, 2022. While Natpara has orphan drug exclusivity for hypoparathyroidism, we believe that we will be able to demonstrate that our oral formulation of PTH is clinically superior to Natpara in that it demonstrates greater effectiveness is safer than Natpara or that it otherwise makes a major contribution to patient care. Therefore, we believe that Natpara’s orphan drug exclusivity will not prevent the FDA from approving our BLA for EB612. In June 2016, we received approval from the EMA granting orphan status to our oral PTH in Europe.
Development and License Agreements
In addition to the development of our product candidates, we have a research collaboration and license agreement with Amgen, combining our proprietary drug delivery platform with drugs selected by Amgen to create new products. Pursuant to the agreement, in January 2019, we received a non-refundable and non-creditable initial technology access fee of $725,000 from Amgen, of which $500,000 was attributed to the right to use our intellectual property, and $225,000 was attributed to the pre-clinical R&D services that we are obligated to perform under the agreement. We are eligible to receive from Amgen aggregate payments of up to $270 million upon achievement of various clinical and commercial milestones or Amgen’s exercise of options to select up to two additional programs to include in the collaboration, as well as tiered royalty payments based on percentages ranging from the low to mid-single digits based on the level of Amgen’s net sales of the applicable products. During 2020 through March 16, 2021, we received an additional aggregate amount of $518,000 from Amgen for research and development services. The agreement is exclusive only to the specific drug candidates that are developed and discovered under the collaboration program, leaving us the rights to commercialize and develop products with other drugs using our proprietary technology while also allowing Amgen to retain all rights to its certain large molecules and any subsequent improvements. The first prospective product under the agreement with Amgen is currently in the preclinical and research and development phase. Under the agreement, we will engage in preclinical development at Amgen’s expense and Amgen will conduct all research, clinical development, manufacturing and commercialization activities.
Additional Research and Development
Future Development of Orally Delivered Large Molecule Therapeutics
We intend to use our technology as a platform for the oral delivery of low-bioavailability therapeutics, which may include proteins and other large molecule therapeutics, as well as small molecules with very low absorption due to poor permeability properties (BCS class 3 drugs). We have conducted initial feasibility studies with a number of product candidates, and intend to commence clinical development for our next, non-PTH, product candidate in the future.
We expect that the key criteria in selecting our next clinical candidate will include: the size of the molecule and other chemical characteristics that would benefit from our technology, whether the molecule is best delivered through the intestinal tract rather than through injection, and the drug’s dosing schedule, more specifically, whether it is prescribed for at least three months and would likely be best administered at least once a day. Additionally, we may target large proteins that are prone to inducing damaging immune responses when injected subcutaneously. In some cases, the immune response to the injection is so severe as to reduce or eliminate all physiological effect of the drug upon the illness. We are also considering whether to partner the development of any such additional product candidates and are in early stage discussions with a number of external parties.
15
Bone Healing/Non-Union Fractures
Currently, no pharmacological treatments are available that have been approved to either stimulate bone healing, treat delayed union fractures or treat patients with non-union following a fracture. A number of studies suggest that PTH could be beneficial in the treatment of such fractures, to potentially speed union and/or reduce the risk of non-union. This is due to the fact that PTH increases the activity and number of osteoblasts, which are responsible for bone formation, making it a potential treatment when bone healing is delayed. While surgery is generally required to treat patients with established fracture non-union, PTH might improve likelihood of a favorable surgical outcome. PTH could thus be a potentially new treatment option for the induction of bone healing after a fracture. Non-union fractures occur when the normal process of bone healing fails or is greatly delayed. Note the fracture malunion refers to a fracture that heals, but with an important abnormal structure or alignment of the bone fragments. By definition, a non-union fracture will not heal on its own. Most non-union fractures require surgery, which can involve bone grafts or stabilizing the affected bone by affixing rods, plates or screws. Risks of surgery include neurovascular injury, infection and hemorrhage.
In the United States, there are approximately seven million new fractures each year, with approximately 300,000 delayed union or non-union fractures. Estimates for the average non-union treatment costs vary from approximately $25,000 to $45,000.
Depending on the nature of the fracture, non-surgical solutions can include electrical stimulation or fitting external braces. Other more experimental techniques exist as well, including ultrasound stimulation, which has been approved by the FDA for treating fresh fracture since the 1990s. Unlike the rigorous requirements for new drug approval, the FDA has not required the same level of evidence for the efficacy of devices used to treat a medical condition. The major drawbacks of the more traditional methods are invasiveness and the risks inherent with surgery. In addition, bone grafting is associated with considerable morbidity, including chronic pain, injury to nerves and muscle and blood loss. Surgical cost is another significant concern. Experimental techniques, such as stimulation of the bone with electricity or sound show some promise for healing, but data demonstrating its effectiveness remains limited.
Our Potential Solution for Non-union or Delayed-Union of Fractures
We intend to investigate the efficacy of EB613 for delayed-union or non-union fractures. We may either pursue fracture treatment as an additional use of EB613 or further modify the formulation if studies suggest we could achieve a PK profile that is more efficacious for bone fractures. As treatment of non-union fractures and bone healing may entail three to six months of treatment, we believe the acceptance of oral PTH will be higher than other potential pharmacological alternatives that require injections.
Intellectual Property
Our success depends in part on our ability to protect the proprietary nature of our product candidates, technology, and know-how; operate without infringing on the proprietary rights of others, and prevent others from infringing on our proprietary rights. We seek to protect our proprietary position by, among other methods, seeking patent protection in the United States and in certain other jurisdictions for our product candidates and other technology that we consider important to the development of our business, where such protection is available. We believe that our success will depend in part on our ability to obtain patent protection for our intellectual property. We also intend to rely on trade secret protection, know-how and the exploitation of in-licensing opportunities to develop our proprietary position.
Patent Rights
As of March 1, 2022, our global patent portfolio included the following patents and patent applications:
Patents claiming compositions comprising a protein, an absorption enhancer and a protease inhibitor as well as methods for oral administration of a protein with an enzymatic activity, which compositions cover EB612 and EB613, have been issued in the United States, Australia, Japan, China, Hong Kong, Israel, Canada, New Zealand and Russia and have been granted by the European Patent Office (EPO) and validated accordingly in Belgium, France, Germany, Great Britain, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Spain, Sweden, and Switzerland. Related patent applications are pending before the European Patent Office (EPO) and in the United States, Hong Kong, Brazil, China and India. Patents specifically covering PTH have already been granted in the United States, Hong Kong, Israel, Russia and Japan, and have been granted by the EPO and validated in Belgium, France, Germany, Great Britain, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Spain, Sweden, and Switzerland. In addition, patent applications which specifically cover PTH are currently pending in Hong Kong, Brazil, China and India. The current issued patent in China is limited to insulin. This issued patent and any patent that may issue from the pending patent applications are currently expected to expire in August 2029, assuming all annuity and maintenance payments are paid thereon. Rights to these patents and patent applications were assigned to us pursuant to the Patent Transfer Agreement with Oramed.
16
Three patent applications filed in various jurisdictions, which we believe, if issued as patents containing substantially the same claims as those in the applications, would cover certain oral administration technologies. The mentioned technologies include compositions and drug delivery devices which utilize an absorption enhancer to enable the absorption of a therapeutically active agent in a controlled manner. We believe that certain of the pending claims contained in these patent applications, if issued in substantially the same form, would cover the formulations of EB612 and EB613. An application covering certain formulations with a controlled absorption profile was filed with the EPO and in the United States, Canada, Hong Kong, Israel and Mexico. Another application covering certain formulations for co-administration with an antacid or protease inhibitor was filed with the EPO and in the United States, Canada and Hong Kong (the application in the United States has been granted, and a divisional application has been filed therein). Any patents that issue from these patent applications are expected to expire in February 2036, assuming all annuity and maintenance payments are paid thereon. Another application covering certain formulations and regimens was filed with the EPO and in the United States, Australia, Brazil, Canada, China, Hong Kong, India, Israel, Japan, Mexico, New Zealand, Singapore, South Africa and South Korea. Any patents that issue from this patent application are expected to expire in August 2037, assuming all annuity and maintenance payments are paid thereon.
Three patent applications filed in various jurisdictions, which we believe, if issued as patents containing substantially the same claims as those in the applications, would contain method of treatment claims covering the use of orally administered PTH for the treatment of osteoporosis (filed with the EPO and in the United States, Canada, China, Hong Kong, Israel and Japan; the application in Japan has been granted, and a divisional applications has been filed therein), hypoparathyroidism (filed with the EPO and in the United States, Brazil, Canada, Hong Kong, Israel and Japan; the application in Japan has been granted, and a divisional applications has been filed therein) and bone fractures and related conditions (filed with the EPO and in the United States, Canada and Hong Kong). Any patents that issue from these patent applications are expected to expire in February 2036, assuming all annuity and maintenance payments are paid thereon, and while not considering patent term extension when applicable.
Eleven provisional patent applications have been filed in 2022, which we believe, if issued as patents containing substantially the same claims as those in the applications, would cover new discoveries for the oral delivery of large molecules. Any patents that issue from these patent applications are expected to expire in February 2043, assuming all annuity and maintenance payments are paid thereon and while not considering patent term extension when applicable.
The term of individual patents depends upon the legal term for patents in the countries in which they are granted. In most countries, including the United States, the patent term is generally 20 years from the earliest claimed filing date of a non-provisional patent application in the applicable country. In the United States, a patent’s term may, in certain cases, be lengthened by patent term adjustment, which compensates a patentee for administrative delays by the USPTO in examining and granting a patent, or may be shortened if a patent is terminally disclaimed over a commonly owned patent or a patent naming a common inventor and having an earlier expiration date. The Hatch-Waxman Act, permits a patent term extension of up to five years beyond the expiration date of a U.S. patent as partial compensation for the useful patent term lost, if any, during the FDA regulatory review process. However, a patent term extension cannot extend the remaining term of a patent beyond a total of 14 years from the date of the product’s approval by the FDA. The patent term extension period is generally one-half the time between the effective date of the IND and the submission date of the NDA for the product, plus the time between the submission date of the NDA and the approval of the application. Only one patent applicable to an approved drug is eligible for the extension and the application for the extension must be submitted prior to the expiration of the patent. Only those claims covering the approved drug, a method for using it or a method for manufacturing it may be extended. Moreover, we may not receive an extension because of, for example, failing to apply within applicable deadlines, failing to apply prior to expiration of relevant patents or otherwise failing to satisfy applicable requirements. Similar provisions are available in the EU and certain other foreign jurisdictions to extend the term of a patent that covers an approved drug. However, the length of any extension, if granted, could be less than we request.
Trade Secrets
In addition to patent rights, we also rely on unpatented trade secrets and know-how to protect our proprietary technology. However, trade secrets can be difficult to protect. We seek to protect our proprietary technology, in part, by entering into confidentiality agreements with our employees, consultants, contractors, manufacturers, outside scientific collaborators and sponsored researchers, members of our board of directors, technical review board and other advisors upon their engagement. These agreements generally provide that all confidential information developed or made known to the individual during the course of the individual’s relationship with us is to be kept confidential and not to be disclosed to third parties except in specific limited circumstances. We also generally require signed confidentiality or material transfer agreements from any company that is to receive our confidential information. In the case of employees, consultants, and contractors, the agreements also generally provide that all inventions conceived by the individual while rendering services to us shall be assigned to us as our exclusive property. There can be no assurance, however, that we have entered into agreements with all applicable parties, that all persons who we desire to sign such agreements will sign, or if they do, that such agreements will not be breached, that we would have adequate remedies for any breach, or that our unpatented trade secrets or know-how will not otherwise become known or be independently developed by competitors. Additionally, to the extent that our commercial partners, collaborators, employees, and consultants use intellectual property owned by others in their work for us, disputes may arise as to the rights in related or resulting know-how and inventions. For this and a more comprehensive discussion of risks related to our intellectual property, see “Item 1A.–Risk Factors—Risks Related to Our Intellectual Property.”
17
Commercialization Strategy
Our current main focus is developing an oral PTH (1-34) for the treatment of osteoporosis and orphan indications, and, specifically, EB613 for the treatment of osteoporosis and EB612 for the treatment of hypoparathyroidism. EB613 and EB612 are two drug candidates based on oral PTH (1-34) with significantly distinct treatment approaches. In the future, we may also conduct clinical trials of EB613 for the treatment of non-union fractures. We are also investigating the application of our oral drug delivery platform to other FDA-approved proteins or large molecule therapeutics where oral dosing could either increase the total addressable market or capture a large share of an existing market due to the potential improvements in convenience, compliance and cost resulting from an orally delivered drug relative to an injectable product. In addition, we intend to explore additional collaborations that leverage our technology platform, such as our collaboration agreement with Amgen. Under the agreement with Amgen, we have agreed to collaborate with Amgen for the development and discovery of clinical candidates in the field of inflammatory disease and other serious illnesses. Further, under the terms of the agreement, we will use our proprietary drug delivery platform to develop oral formulations for up to three large molecule biological drug candidates currently being developed by Amgen.
We have not yet established sales, marketing or product distribution operations because our product candidates are in clinical development. We may seek a partner to develop EB613 and EB612, and we anticipate that any such partner would be responsible for, or substantially support, late stage clinical trials of both of these lead clinical candidates, as well as submitting applications for regulatory approvals and registrations. In our collaboration with Amgen, Amgen is responsible for the research, clinical development, manufacturing and commercialization of any of the resulting programs.
Competition
The medical and pharmaceutical industries in which we operate are highly competitive and subject to rapid and significant technological change and changes in practice. While we believe that our technology, knowledge, experience and scientific resources provide us with competitive advantages, we face competition from many different sources, including large pharmaceutical, specialty pharmaceutical, biotechnology, and generic drug companies and academic and government institutions. We believe that the key competitive factors that will affect the development and commercial success of our oral PTH product candidates for hypoparathyroidism, osteoporosis and non-union fractures, and any other product candidates that we develop, are the efficacy, safety and tolerability profile, convenience in dosing, product labeling, price and availability of reimbursement from the government and other third-parties. Our commercial opportunity could be reduced or eliminated if our competitors have products that are better in one or more of these categories.
We expect that, if approved, our oral PTH product candidates for hypoparathyroidism, osteoporosis and non-union fractures, and other product candidates that we develop, would compete with a number of existing products. Furthermore, we believe that we face competition with regard to our oral drug delivery platform, as we believe that other non-invasive medical drug delivery technologies, including alternative oral delivery systems as well as transdermal patches, are being developed by other parties. Many of our potential competitors have substantially greater financial, technical, commercial and human resources than we do and significantly more experience in the discovery, development and regulatory approvals of product candidates, and the commercialization of those products. Accordingly, our competitors may be more successful than us in obtaining FDA approval for product candidates and achieving widespread market acceptance. See “Item 1A.–Risk Factors—Risks Related to Commercialization of Our Product Candidates.”
EB613 for Osteoporosis
Current treatments for osteoporosis generally fall into two categories: antiresorptive medications to slow bone loss; and anabolic medications to increase the rate of bone formation. The global osteoporosis drug market has traditionally been dominated by bisphosphonates, which slow bone loss. Although bisphosphonates’ market share has declined due to the occurrence of serious side effects, as well as the introduction of newly developed pharmacological treatments, many of the new drugs have serious side effects of their own. Eli Lilly’s Forteo, is one of the most effective osteoporosis medications, and newer products such as Prolia ® and EVENITY ® have been launched by Amgen. If Approved, we anticipate that our product candidate, EB613, will compete with Forteo, Prolia and EVENITY ® . We believe that EB613 may prove to be superior to Forteo due to its oral administration, potentially leading to greater patient acceptance and its sharper pharmacokinetic profile which is expected to have more potent anabolic effect. However, our competitors in this market are large pharmaceutical companies with greater resources than us and the alternatives therapies have been on the market for many years and have widespread market acceptance.
18
EB612 for Hypoparathyroidism
Historically, the treatments for hypoparathyroidism have been calcium supplements, vitamin D supplements and phosphate binders. However there are many serious side effects that result from the chronic use of high doses of these products. Our product candidate EB612 is designed to deliver PTH to hypoparathyroid patients to directly address the underlying PTH deficiency. Because our product would be a branded pharmaceutical, in contrast to the over-the-counter supplements currently used by those with the condition, we believe that the market acceptance will be strongest among patients whose disease is not well-controlled by over-the-counter supplements, or in those patients who continue to suffer from side effects associated with therapy or symptoms associated with poor management of their condition.
We believe that our key competitor in hypoparathyroidism treatment is Natpara, an injectable bioengineered recombinant form of PTH (1-84) that was approved by the FDA in January 2015. Natpara has been granted orphan drug designation for hypoparathyroidism by the FDA as the first approved product for this indication and has orphan drug market exclusivity for seven years in the United States. Orphan drug market exclusivity means that the FDA may not approve any other application to market the same drug for the same indication for a period of seven years, except in limited circumstances, such as a showing of clinical superiority over the product with orphan exclusivity or where the manufacturer is unable to assure sufficient product quantity. Therefore, we will be able to obtain regulatory approval for EB612, which also has orphan drug designation for hypoparathyroidism, only if we demonstrate EB612’s clinical superiority over Natpara. For example, EB612 would need to demonstrate either greater effectiveness or safety than Natpara or that it otherwise makes a major contribution to patient care. We believe that we will be able to demonstrate that our oral formulation of PTH is clinically superior to Natpara in terms of efficacy and safety, and therefore, that Natpara’s orphan drug exclusivity will not prevent the FDA from approving our NDA for oral PTH prior to the expiration of Natpara’s market exclusivity period in 2022 and subject to the successful completion of clinical development and acceptance of our NDA. In 2019, Natpara was recalled due to certain product format issues, and, while Takeda has disclosed its efforts to reintroduce Natpara to the market, it has not yet been successful in doing so.
In addition, Ascendis Pharma has reported that it is developing a long-acting, oral prodrug formulation of PTH for the treatment of hypoparathyroidism. In 2020, Ascendis reported top-line results from a global Phase 2 trial that indicated potential use of its product, TransCon PTH. Transcon PTH is delivered as a once-a-day injection that demonstrated normalization of quality of life and its potential as a hormone replacement therapy for hypoparathyroidism. Ascendis Pharma has initiated a global Phase 3 study of Transcon PTH that is planned to enroll 76 patients. Other companies and groups that are developing or commercializing therapies for hypoparathyroidism include Chugai Pharmaceutical Co., Ltd. (conducting a Phase 1 study), Extend Biosciences Inc. (initiating a Phase 1 study), Massachusetts General Hospital, Amolyt (formerly known as Alizé Pharma) which is working on a Parathyroid Cell Transplant starting Phase 1 with AZP-3601 and Eli Lilly.
The Israeli Innovation Authority (IIA) Grants
We have received grants of approximately $0.5 million from the IIA to partially fund our research and development. The grants are subject to certain requirements and restrictions under the Israeli research law, which we refer to as the Research Law. In general, until the grants are repaid with interest, royalties are payable to the Israeli government in the amount of 3% on revenues derived from sales of products or services developed in whole or in part using the IIA grants, including EB612, EB613 and any other oral PTH product candidates we may develop. The royalty rate may increase to 5%, with respect to approved applications filed following any year in which we achieve sales of over $70 million.
The amount that must be repaid may be increased up to six times the amount of the grant received, and the rate of royalties may be accelerated if manufacturing of the products developed with the grant money is transferred outside of the State of Israel. As of December 31, 2021, the total royalty amounts payable to the IIA, including accrued interest, was approximately $0.5 million. As of December 31, 2021, we had paid royalties in the amount of $79,000 to the IIA.
19
In addition to paying any royalties due, we must abide by other restrictions associated with receiving such grants under the Research Law that continue to apply even following repayment to the IIA. These restrictions may impair our ability to outsource manufacturing, engage in change of control transactions or otherwise transfer our “know-how” (in its meaning under the Research Law) in or outside of Israel, and may require us to obtain the approval of the IIA for certain actions and transactions and pay additional royalties and other amounts to the IIA. We may not receive the required approvals for any proposed transfer and, even if received, we may be required to pay the IIA a portion of the consideration that we receive upon any transfer of such technology to a non-Israeli entity up to 600% of the grant amounts and the interest. The IIA approved the Company’s Research Collaboration and License Agreement with Amgen Inc. as of December 2018, subject to payments to the IIA in the rate of 5.38% out of any payment received from Amgen for the license and up to a total amount of six times the amount of the IIA funding and the interest. In addition, as disclosed under “—Manufacturing”, we have signed a contract with a U.K.-based contract manufacturing organization to produce and supply pills for trials performed worldwide. We believe that, because production is not being done for commercial purposes, the entry into the production agreement in the U.K. will not affect the royalty rates to be paid to the IIA. Should it turn out that this position is not acceptable to the IIA, the maximum royalties to be paid to the IIA will be three times the amount of the grants and the interest. In addition, any change of control and any change of ownership of our Ordinary Shares that would cause a non-Israeli citizen or resident to become an interested party as defined in the Research Law (which includes any person who holds 5% or more of our outstanding shares) requires written notice to the IIA. Such a non-Israeli interested party is required to sign an undertaking towards the IIA in which it undertakes to comply with the Research Law. If we fail to comply with the Research Law, we may be forced to return the grants and/or be subject to other payments to the IIA, monetary fines and/or criminal charges.
Oramed Patent Transfer Agreement
In 2010, in connection with our establishment as a joint venture between D.N.A Biomedical Solutions Ltd. (“D.N.A Biomedical”) and Oramed Ltd. (“Oramed”), a subsidiary of Oramed Pharmaceuticals, Inc., we entered into a patent license agreement with Oramed pursuant to which Oramed granted us a worldwide, royalty-bearing, exclusive, irrevocable, perpetual and sub-licensable license under certain Oramed patent rights, to develop, manufacture and commercialize products for certain indications to be specified by us and Oramed, other than diabetes, obesity and influenza. In February 2011, D.N.A Biomedical and Oramed entered into a share purchase agreement for the sale by Oramed to D.N.A Biomedical of 47% of our Ordinary Shares at the time of the transaction in February 2011. In connection with this transaction, in February 2011 we entered into a Patent Transfer Agreement with Oramed to replace the original 2010 license agreement.
Pursuant to the terms of the Patent Transfer Agreement, Oramed assigned to us all of its right, title and interest in the previously licensed patent rights, and, in return, we granted to Oramed a worldwide, royalty-free, exclusive, irrevocable, perpetual and sublicensable license under the assigned patent rights to develop, manufacture and commercialize products or otherwise exploit such patent rights in the fields of diabetes and influenza. Additionally, we agreed not to engage, directly or indirectly, in any activities in the fields of diabetes and influenza. In consideration for such assignment, we agreed to pay Oramed royalties equal to 3% of our net revenues generated, directly or indirectly, from exploitation of the assigned patent rights, including the sale, lease or transfer of the assigned patent rights or sales of products or services covered by the assigned patent rights. Either party may terminate the Patent Transfer Agreement for the other party’s uncured material breach upon 45 days’ written notice (and immediately upon written notice in the event of an incurable breach), or if the other party undergoes certain insolvency-related events. The royalty obligations imposed on us will survive termination of the Patent Transfer Agreement.
Manufacturing
We do not own or operate facilities for large scale product manufacturing, storage and distribution, or testing, nor do we expect to in the future. Our current facility is limited to small-mid scale manufacturing, storage and distribution of materials and oral drug formulations for clinical studies. Our facility has ISO:9001:2015 quality management systems accreditation from The Standards Institution of Israel for the production and development of functional excipients for oral drug formulations to be used in clinical trials. The facility includes a dedicated Class D clean room for tablet production and a dedicated chemical synthesis room designed to meet ISO 8 specifications.
Our manufacturing activities include the chemical synthesis of one of our non-active but functional drug components in our facility. In addition, we have a contract with a U.K.-based contract manufacturing organization, to produce and supply pills for trials performed worldwide, including formulation and production of the final drug, packaging, storage and distribution. The UK facility is an FDA/EMA inspected-GMP site and we expect future clinical studies with our oral PTH (1-34) tablets, as well as the potential commercial supply, if approved, will be provided by the same subcontractor. This contract is not exclusive and we may enter into additional contracts. Our QA/QC analytical laboratory performs part of the release and stability testing for PTH tablets manufactured by the U.K.-based contract manufacturing facility. In addition, our research and development team supports the manufacturing activities and develops/optimizes analytical methods used by the contract manufacturer in order to meet regulatory requirements for our clinical trials. Various materials included in the drug formulation and materials procured for the chemical synthesis are commercially available from various accredited suppliers. We do not have supply contracts with all such vendors and are not bound to any specific vendor at this point in time. However, it is our intention to complete such contracts in anticipation of commercial manufacturing activities, so that if approved, we will have such contracts in place.
20
Government Regulation and Product Approval
Government authorities in the United States, at the federal, state and local level, and in other countries and jurisdictions, including the EU, extensively regulate, among other things, the research, development, testing, manufacture, pricing, quality control, approval, packaging, storage, recordkeeping, labeling, advertising, promotion, distribution, marketing, post-approval monitoring and reporting, and import and export of pharmaceutical products. The processes for obtaining regulatory approvals in the United States and in other countries and jurisdictions, along with subsequent compliance with applicable statutes and regulations and other regulatory authorities, require the expenditure of substantial time and financial resources.
Review and Approval of Drugs in the United States
In the United States, our product candidates are regulated by the FDA as drugs under the Federal Food, Drug, and Cosmetic Act, or the FDCA, the Public Health Service Act, or the PHSA, and regulations implemented by the FDA. The failure to comply with the applicable requirements at any time during the product development process, including preclinical testing, clinical testing, the approval process or post-approval process, may subject an applicant to delays in the conduct of clinical trials, regulatory review and approval, and/or administrative or judicial sanctions. These sanctions may include, but are not limited to, the FDA’s refusal to allow an applicant to proceed with clinical testing, refusal to approve pending applications, license suspension or revocation, withdrawal of an approval, warning letters, adverse publicity, customer notifications, product recalls, product seizures, refusal to grant export or import approval total or partial suspension of production or distribution, consent decrees, injunctions, fines, and civil or criminal investigations and penalties brought by the FDA or Department of Justice, or other governmental entities.
The process required by the FDA before a new drug or biologic may be marketed in the United States generally involves satisfactorily completing each of the following steps:
• preclinical laboratory tests, animal studies and formulation studies all performed in accordance with the FDA’s Good Laboratory Practice regulations;
• submission to the FDA of an IND application for human clinical testing, which must become effective before human clinical trials may begin;
• approval by an independent IRB, representing each clinical site before each clinical trial may be initiated;
• performance of adequate and well-controlled clinical trials to establish the safety and efficacy of the product candidate for each proposed indication for use and conducted in accordance with Good Clinical Practice, or GCP, requirements;
• submission of data supporting safety and efficacy as well as detailed information on the manufacture and composition of the product in clinical development and proposed labeling;
• preparation and submission to the FDA of a New Drug Application, or an NDA, or Biologics License Application, or BLA;
• review of the product by an FDA advisory committee, where appropriate or if applicable;
• satisfactory completion of one or more FDA inspections of the manufacturing facility or facilities, including those of third parties, at which the product, or components thereof, are produced to assess compliance with current Good Manufacturing Practice, or cGMP, standards and to assure that the facilities, methods and controls are adequate to preserve the product’s identity, strength, quality and purity;
21
• satisfactory completion of any FDA audits of the non-clinical and clinical trial sites to assure compliance with GCP requirements and the integrity of clinical data in support of the NDA or BLA;
• payment of user fees and securing FDA approval of the NDA or BLA for the proposed indication; and
• compliance with any post-approval requirements, including risk evaluation and mitigation strategies, or REMS, and any post-approval studies required by the FDA.
Preclinical Studies and Investigational New Drug Application
Preclinical tests include laboratory evaluations of product chemistry, formulation and stability, as well as animal studies to evaluate the potential for efficacy and toxicity. The conduct of the preclinical tests and formulation of the compounds for testing must comply with federal regulations and requirements. The results of the preclinical tests, together with manufacturing information and analytical data, are submitted to the FDA as part of an IND application. Some preclinical tests may continue even after submission of the IND application. The IND automatically becomes effective 30 days after receipt by the FDA, unless before that time the FDA raises concerns or questions about the product or conduct of the proposed clinical trial, including concerns that human research volunteers will be exposed to unreasonable health risks. In that case, the IND sponsor and the FDA must resolve any outstanding FDA concerns before the clinical trial can begin.
As a result, submission of the IND may result in the FDA not allowing the clinical trials to commence or allowing the clinical trial to commence on the terms originally specified by the sponsor in the IND. If the FDA raises concerns or questions either during this initial 30-day period, or at any time during the IND process, it may choose to impose a partial or complete clinical hold. This order issued by the FDA would delay either a proposed clinical trial or cause delay in initiation of our Phase 3 clinical trial, until all outstanding concerns have been adequately addressed and the FDA has notified the company that investigations may proceed. This could cause significant delays or difficulties in completing planned clinical trials in a timely manner.
Clinical Trials
Clinical trials involve the administration of the investigational product candidate to healthy volunteers or patients with the disease to be treated under the supervision of a qualified principal investigator in accordance with GCP requirements. Clinical trials are conducted under trial protocols detailing, among other things, the objectives of the clinical trial, inclusion and exclusion criteria, the parameters to be used in monitoring safety and the effectiveness criteria to be evaluated. A protocol for each clinical trial and any subsequent protocol amendments must be submitted to the FDA as part of the IND.
A sponsor who wishes to conduct a clinical trial outside the United States may, but need not, obtain FDA authorization to conduct the clinical trial under an IND. If a clinical trial outside the United States is not conducted under an IND, the sponsor may submit data from the clinical trial to the FDA in support of a NDA so long as the clinical trial is conducted consistent with GCP and in compliance with an international guideline for the ethical conduct of clinical research known as the Declaration of Helsinki and/or the laws and regulations of the country or countries in which the clinical trial is performed, whichever provides the greater protection to the participants in the clinical trial.
Further, each clinical trial must be reviewed and approved by an IRB either centrally or individually at each institution at which the clinical trial will be conducted. The IRB will consider, among other things, clinical trial design, patient informed consent, ethical factors, the safety of human subjects and, where appropriate, the protection of privacy of the human subjects. An IRB must operate in compliance with the FDA regulations. The FDA, IRB, the clinical trial sponsor, or the principal investigator may suspend or discontinue a clinical trial at any time for various reasons, including a finding that the clinical trial is not being conducted in accordance with FDA requirements or the subjects or patients are being exposed to an unacceptable health risk. Clinical testing also must satisfy extensive GCP rules and the requirements for informed consent. Additionally, some clinical trials are overseen by an independent group of qualified experts organized by the clinical trial sponsor, known as a data and safety monitoring board or committee. This group may recommend continuing the clinical trial as planned, make changes in clinical trial conduct, or cessation of the clinical trial at designated check points based on access to certain data from the clinical trial.
Clinical trials typically are conducted in three sequential phases, but the phases may overlap or be combined. Annual progress reports detailing the results of the clinical trials must be submitted to the FDA. Additional studies may be required after approval.
22
• Phase 1 clinical trials are initially conducted in a limited population to test the product candidate for safety, including adverse effects, dose tolerance, absorption, metabolism, distribution, excretion and pharmacodynamics in healthy humans. For some products for severe or life-threatening diseases, especially if the product may be too toxic to administer to healthy humans, the initial clinical trials may be conducted in individuals having a specific disease for which use the tested product is indicated.
• Phase 2 clinical trials are generally conducted in a limited patient population to identify possible adverse effects and safety risks, evaluate the efficacy of the product candidate for specific targeted indications and determine dose tolerance and optimal dosage. Multiple Phase 2 clinical trials may be conducted by the sponsor to obtain information prior to beginning larger and more costly Phase 3 clinical trials.
• Phase 3 clinical trials proceed if the Phase 2 clinical trials demonstrate that a dose range of the product candidate is potentially effective and has an acceptable safety profile. Phase 3 clinical trials are undertaken to further evaluate, in a larger number of patients, dosage, provide substantial evidence of clinical efficacy and further test for safety in an expanded and diverse patient population at multiple, geographically dispersed clinical trial sites. A well-controlled, statistically robust Phase 3 trial may be designed to deliver the data that regulatory authorities will use to decide whether or not to approve, and, if approved, how to appropriately label a drug: such Phase 3 studies are referred to as “pivotal.”
In some cases, the FDA may approve a NDA or BLA for a product candidate but require the sponsor to conduct additional clinical trials to further assess the drug’s safety and effectiveness after NDA or BLA approval. Such post-approval trials are typically referred to as Phase 4 clinical trials. These studies are used to gain additional data from the treatment of patients in the intended therapeutic indication and to document a clinical benefit in the case of drugs approved under accelerated approval regulations. If the FDA approves a product while a company has ongoing clinical trials that were not necessary for approval, a company may be able to use the data from these clinical trials to meet all or part of any Phase 4 clinical trial requirement or to request a change in the product labeling. Failure to exhibit due diligence with regard to conducting Phase 4 clinical trials could result in withdrawal of approval for products.
Compliance with Current Good Manufacturing Practice Requirements
Before approving a NDA or BLA, the FDA typically will inspect the facility or facilities where the product is manufactured. The FDA will not approve an application unless it determines that the manufacturing processes and facilities are in full compliance with cGMP requirements and able to assure consistent production of the product within required specifications. The PHSA emphasizes the importance of manufacturing control for products like biologics whose attributes cannot be precisely defined.
Manufacturers and others involved in the manufacture and distribution of products must also register their establishments with the FDA and certain state regulatory bodies. Both U.S. and non-U.S. manufacturing establishments must register and provide additional information to the FDA upon their initial participation in the manufacturing process. Any product manufactured by or imported from a facility that has not registered, whether U.S. or non-U.S., is deemed misbranded under the FDCA. Establishments may be subject to periodic unannounced inspections by government authorities to ensure compliance with cGMPs and other laws. Inspections must follow a “risk-based schedule” that may result in certain establishments being inspected more frequently. Manufacturers may also have to provide, on request, electronic or physical records regarding their establishments. Delaying, denying, limiting, or refusing inspection by the FDA may lead to a product being deemed to be adulterated.
Review and Approval of a New Drug Application and Biologics License Application
The results of product candidate development, preclinical testing and clinical trials, including negative or ambiguous results as well as positive findings, are submitted to the FDA as part of a NDA or BLA requesting approval to market the product. The NDA or BLA also must contain extensive manufacturing information and detailed information on the composition of the product and proposed labeling as well as payment of a user fee.
Under the Prescription Drug User Fee Act, or PDUFA, as amended, each NDA or BLA must be accompanied by a user fee, which the FDA adjusts on an annual basis. Fee waivers or reductions are available in certain instances, such as a waiver of the application fee for an initial application filed by a small business. Moreover, no user fees are assessed on NDAs or BLAs for products designated as orphan drugs, unless the product has a non-orphan indication for use.
23
The FDA has 60 days after submission of the application to conduct an initial review to determine whether it is sufficient to accept for filing based on the agency’s threshold determination that it is sufficiently complete to permit substantive review. Once the submission has been accepted for filing, the FDA begins an in-depth review of the application. Under the goals and policies under the PDUFA, the FDA has ten months from the filing date in which to complete its initial review of a standard application and respond to the applicant, and six months for a priority review of the application. The FDA does not always meet its PDUFA goal dates for standard and priority applications. The review process may often be significantly extended by FDA requests for additional information or clarification. The review process and the PDUFA goal date may be extended by three months if the FDA requests, or the applicant otherwise provides additional information or clarification regarding information already provided in the submission within the last three months before the PDUFA goal date.
Under the FDCA and the PHSA, the FDA may approve a NDA or BLA if it determines that the product is safe, pure and potent and the facility where the product will be manufactured meets standards designed to ensure that it continues to be safe, pure and potent.
On the basis of the FDA’s evaluation of the application and accompanying information, including the results of the inspection of the manufacturing facilities, the FDA may issue an approval letter or a complete response letter. An approval letter authorizes commercial marketing of the product with specific prescribing information for specific indications. If the application is not approved, the FDA will issue a complete response letter, which will contain the conditions that must be met in order to secure final approval of the application, and, when possible, will outline recommended actions the sponsor might take to obtain approval of the application. Sponsors that receive a complete response letter may submit to the FDA information that represents a complete response to the issues identified by the FDA. Such resubmissions are classified under PDUFA as either Class 1 or Class 2. The classification of a resubmission is based on the information submitted by an applicant in response to an action letter. Under the goals and policies agreed to by the FDA under PDUFA, the FDA has two months to review a Class 1 resubmission and six months to review a Class 2 resubmission from the date of receipt. The FDA will not approve an application until issues identified in the complete response letter have been addressed.
The FDA may also refer the application to an advisory committee for review, evaluation and recommendation as to whether the application should be approved. Typically, an advisory committee is a panel of independent experts, including clinicians and other scientific experts, that reviews, evaluates and provides a recommendation as to whether the application should be approved and under what conditions. The FDA is not bound by the recommendations of an advisory committee, but it considers such recommendations carefully when making decisions.
If the FDA approves a new product, it may limit the approved indications for use of the product. It may also require that contraindications, warnings or precautions be included in the product labeling. In addition, the FDA may call for post-approval studies, including Phase 4 clinical trials, to further assess the product’s safety after approval. The agency may also require testing and surveillance programs to monitor the product after commercialization, or impose other conditions, including distribution restrictions or other risk management mechanisms, including a REMS, to help ensure that the benefits of the product outweigh the potential risks. A REMS can include medication guides, communication plans for healthcare professionals, and elements to assure safe use, or ETASU. ETASU can include, but are not limited to, special training or certification for prescribing or dispensing, dispensing only under certain circumstances, special monitoring, and the use of patent registries. The FDA may prevent or limit further marketing of a product based on the results of post-market studies or surveillance programs. After approval, many types of changes to the approved product, such as adding new indications, manufacturing changes and additional labeling claims, are subject to further testing requirements and FDA review and approval.
The Drug Price Competition and Patent Term Restoration Act, or the Hatch-Waxman Act, added Section 505(b)(2) to the FDCA, allowing a company to submit an NDA application that relies on clinical trial data not conducted by or for the application, such as published scientific literature and prior FDA findings of safety and efficacy of another company’s drug. An NDA application under Section 505(b)(2) is typically used when the applicant product modifies or improves a predicate drug leading to a new drug product. Because an application under Section 505(b)(2) can rely on prior clinical trial data and published scientific literature, FDA approval is generally quicker than a normal NDA application. However, an application under Section 505(b)(2) can also be delayed if the predicate drug is still under patent or exclusivity protections.
Fast Track, Breakthrough Therapy and Priority Review Designations
The FDA is authorized to designate certain products for expedited review if they are intended to address an unmet medical need in the treatment of a serious or life-threatening disease or condition, or in the event of an emergency. These programs are fast track designation, breakthrough therapy designation and priority review designation.
24
Specifically, the FDA may designate a product for fast track review if it is intended, whether alone or in combination with one or more other products, for the treatment of a serious or life-threatening disease or condition, and it demonstrates the potential to address unmet medical needs for such a disease or condition. For fast track products, sponsors may have greater interactions with the FDA and the FDA may initiate review of sections of a fast track product’s application before the application is complete. This rolling review may be available if the FDA determines, after preliminary evaluation of clinical data submitted by the sponsor, that a fast track product may be effective. The sponsor must also provide, and the FDA must approve, a schedule for the submission of the remaining information and the sponsor must pay applicable user fees. However, the FDA’s time period goal for reviewing a fast track application does not begin until the last section of the application is submitted. In addition, the fast track designation may be withdrawn by the FDA if the FDA believes that the designation is no longer supported by data emerging in the clinical trial process.
Second, in 2012, Congress enacted the Food and Drug Administration Safety and Innovation Act, or FDASIA. This law established a new regulatory scheme allowing for expedited review of products designated as “breakthrough therapies.” A product may be designated as a breakthrough therapy if it is intended, either alone or in combination with one or more other products, to treat a serious or life-threatening disease or condition and preliminary clinical evidence indicates that the product may demonstrate substantial improvement over existing therapies on one or more clinically significant endpoints, such as substantial treatment effects observed early in clinical development. The FDA may take certain actions with respect to breakthrough therapies, including holding meetings with the sponsor throughout the development process; providing timely advice to the product sponsor regarding development and approval; involving more senior staff in the review process; assigning a cross-disciplinary project lead for the review team; and taking other steps to design the clinical trials in an efficient manner.
Third, the FDA may designate a product for priority review if it is a product that treats a serious condition and, if approved, would provide a significant improvement in safety or effectiveness. The FDA determines, on a case-by-case basis, whether the proposed product represents a significant improvement when compared with other available therapies. Significant improvement may be illustrated by evidence of increased effectiveness in the treatment of a condition, elimination or substantial reduction of a treatment-limiting product reaction, documented enhancement of patient compliance that may lead to improvement in serious outcomes, and evidence of safety and effectiveness in a new subpopulation. A priority designation is intended to direct overall attention and resources to the evaluation of such applications, and to shorten the FDA’s goal for taking action on a marketing application from ten months to six months.
Fourth, the Secretary of Health and Human Services may authorize unapproved drugs and biologics to be marketed in the event an actual or potential emergency has been designated by the U.S. government. After an emergency has been designated, the FDA may issue an Emergency Use Authorization, or EUA, for the use of a specific product based on criteria established by the FDCA. An EUA is product specific and is subject to specific conditions and restrictions. Once the emergency underlying the EUA ends, then the EUA terminates.
Accelerated Approval Pathway
The FDA may grant accelerated approval to a product for a serious or life-threatening condition that provides meaningful therapeutic advantage to patients over existing treatments based upon a determination that the product has an effect on a surrogate endpoint that is reasonably likely to predict clinical benefit. The FDA may also grant accelerated approval for such a condition when the product has an effect on an intermediate clinical endpoint that can be measured earlier than an effect on irreversible morbidity or mortality, or IMM, and that is reasonably likely to predict an effect on irreversible morbidity or mortality or other clinical benefit, taking into account the severity, rarity, or prevalence of the condition and the availability or lack of alternative treatments. Products granted accelerated approval must meet the same statutory standards for safety and effectiveness as those granted traditional approval.
For the purposes of accelerated approval, a surrogate endpoint is a marker, such as a laboratory measurement, radiographic image, physical sign, or other measure that is thought to predict clinical benefit, but is not itself a measure of clinical benefit. Surrogate endpoints can often be measured more easily or more rapidly than clinical endpoints. An intermediate clinical endpoint is a measurement of a therapeutic effect that is considered reasonably likely to predict the clinical benefit of a product, such as an effect on IMM. The FDA has indicated that intermediate clinical endpoints generally may support accelerated approval where the therapeutic effect measured by the endpoint is not itself a clinical benefit and basis for traditional approval, if there is a basis for concluding that the therapeutic effect is reasonably likely to predict the ultimate clinical benefit of a product.
25
The accelerated approval pathway is most often used in settings in which the course of a disease is long and an extended period of time is required to measure the intended clinical benefit of a product, even if the effect on the surrogate or intermediate clinical endpoint occurs rapidly.
The accelerated approval pathway is usually contingent on a sponsor’s agreement to conduct, in a diligent manner, additional post-approval confirmatory studies to verify and describe the product’s clinical benefit. As a result, a product candidate approved on this basis is subject to rigorous post-marketing compliance requirements, including the completion of Phase 4 or post-approval clinical trials to confirm the effect on the clinical endpoint. Failure to conduct required post-approval studies, or confirm a clinical benefit during post-marketing studies, would allow the FDA to withdraw the product from the market on an expedited basis. All promotional materials for product candidates approved under accelerated regulations are subject to prior review by the FDA.
Post-Approval Regulation
Once regulatory approval for marketing of a product or new indication for an existing product is obtained, the sponsor will be required to comply with post-approval regulatory requirements, including any post-approval requirements that the FDA may have imposed as a condition of approval. The sponsor will be required to report certain adverse reactions and production problems to the FDA, provide updated safety and efficacy information and comply with requirements concerning advertising and promotional labeling requirements. Drug manufacturers and certain of their subcontractors are required to register their establishments with the FDA and certain state agencies, and are subject to periodic unannounced inspections by the FDA and certain state agencies for compliance with ongoing regulatory requirements, including cGMP regulations, which impose certain procedural and documentation requirements upon drug manufacturers. Accordingly, the sponsor and its third-party manufacturers must continue to expend time, money and effort in the areas of production and quality control to maintain compliance with cGMP regulations and other regulatory requirements.
A product may also be subject to official lot release, meaning that the manufacturer is required to perform certain tests on each lot of the product before it is released for distribution. If the product is subject to official release, the manufacturer must submit samples of each lot, together with a release protocol showing a summary of the history of manufacture of the lot and the results of all of the manufacturer’s tests performed on the lot, to the FDA. The FDA may in addition perform certain confirmatory tests on lots of some products before releasing the lots for distribution. Finally, the FDA will conduct laboratory research related to the safety, purity, potency, and effectiveness of pharmaceutical products.
After an approval is granted, the FDA may withdraw the approval if compliance with regulatory requirements and standards is not maintained or if problems occur after the product reaches the market. Later discovery of previously unknown problems with a product, including adverse events of unanticipated severity or frequency, or with manufacturing processes, or failure to comply with regulatory requirements, may result in revisions to the approved labeling to add new safety information; imposition of post-market studies or clinical trials to assess new safety risks; or imposition of distribution or other restrictions under a Risk Evaluation and Mitigation Strategies, or REMS, program. Other potential consequences include, among other things:
• restrictions on the marketing or manufacturing of the product, complete withdrawal of the product from the market or product recalls;
• fines, warning letters or holds on post-approval clinical trials;
• refusal of the FDA to approve pending NDAs or supplements to approved NDAs, or suspension or revocation of product license approvals;
• product seizure or detention, or refusal to permit the import or export of products; or
• injunctions or the imposition of civil or criminal penalties.
The FDA strictly regulates marketing, labeling, advertising and promotion of products that are placed on the market. Drugs and biologics may be promoted only for the approved indications and in accordance with the provisions of the approved label. The FDA and other agencies actively enforce the laws and regulations prohibiting the promotion of off-label uses, and a company that is found to have improperly promoted off-label uses may be subject to significant liability.
26
Orphan Drug Designation
Orphan drug designation in the United States is designed to encourage sponsors to develop drugs intended for rare diseases or conditions. In the United States, a rare disease or condition is statutorily defined as a condition that affects fewer than 200,000 individuals in the United States, or that affects more than 200,000 individuals in the United States and for which there is no reasonable expectation that the cost of developing and making available the drug for the disease or condition will be recovered from sales of the drug in the United States.
Orphan drug designation qualifies a company for tax credits, waiver of the NDA user fee and may confer market exclusivity for seven years following the date of the drug’s marketing approval, if granted by the FDA, if a product that has orphan designation subsequently receives the first FDA approval of that drug for the disease for which it has such designation. This means that the FDA may not approve any other applications, including an NDA to market the same drugs or even in a different formulation for the same indication for seven years, except in limited circumstances such as a showing of clinical superiority over the product with orphan drug exclusivity or where the manufacturer is unable to assure sufficient product quantity. An application for designation as an orphan product can be made any time prior to the filing of an application for approval to market the product. A product becomes an orphan product when it receives orphan drug designation from the Office of Orphan Products Development, or OOPD, at the FDA based on acceptable confidential requests made under the regulatory provisions. The product must then go through the review and approval process like any other product.
A sponsor may request orphan drug designation of a previously unapproved product or new orphan indication for an already marketed product. In addition, a sponsor of a product that is otherwise the same product as an already approved orphan drug may seek and obtain orphan drug designation for the subsequent product for the same rare disease or condition if it can present a plausible hypothesis that its product may be clinically superior to the first, approved product. More than one sponsor may receive orphan drug designation for the same product for the same rare disease or condition, but each sponsor seeking orphan drug designation must file a complete request for designation, and only the first sponsor that obtains approval for that drug for the orphan indication will obtain market exclusivity, effectively preventing the FDA from approving products under development by competitors for the same drug and same indication, unless the competitor is able to demonstrate that the product under development is clinically superior to the approved product or the approved product is not available in sufficient quantities. To permit the FDA to end another manufacturer’s orphan exclusivity period, the FDA must determine that the manufacturer has demonstrated clinical superiority by showing the later drug is safer, more effective, or otherwise makes a major contribution to patient care.
The period of exclusivity begins on the date that the marketing application is approved by the FDA and applies only to the indication for which the product has been designated. The FDA may approve a second application for the same product for a different use or a subsequent application for a different drug for the same indication. Orphan drug designation neither shortens the development time or regulatory review time of a drug nor gives the drug any advantage in the regulatory review or approval process.
Biosimilars and Exclusivity
The ACA, which was signed into law on March 23, 2010, included a subtitle called the Biologics Price Competition and Innovation Act of 2009 or BPCIA. The BPCIA established a regulatory scheme authorizing the FDA to approve biosimilars and interchangeable biosimilars. The FDA has issued several draft guidance documents outlining an approach to review and approval of biosimilars. Complexities associated with the larger, and often more complex, structures of biological products, as well as the processes by which such products are manufactured, pose significant hurdles to implementation, which are still being worked out by the FDA.
Under the BPCIA, a manufacturer may submit an application for licensure of a biologic product that is “biosimilar to” or “interchangeable with” a previously approved biological product or “reference product.” In order for the FDA to approve a biosimilar product, it must find that there are no clinically meaningful differences between the reference product and proposed biosimilar product in terms of safety, purity, and potency. For the FDA to approve a biosimilar product as interchangeable with a reference product, the agency must find that the biosimilar product can be expected to produce the same clinical results as the reference product, and (for products administered multiple times) that the biologic and the reference biologic may be switched after one has been previously administered without increasing safety risks or risks of diminished efficacy relative to exclusive use of the reference biologic.
Under the BPCIA, an application for a biosimilar product may not be submitted to the FDA until four years following the date of approval of the reference product. The FDA may not approve a biosimilar product until 12 years from the date on which the reference product was approved. Even if a product is considered to be a reference product eligible for exclusivity, another company could market a competing version of that product if the FDA approves a full BLA for such product containing the sponsor’s own preclinical data and data from adequate and well-controlled clinical trials to demonstrate the safety, purity and potency of their product. The BPCIA also created certain exclusivity periods for biosimilars approved as interchangeable products.
27
Patent Term Extension
A patent claiming a new drug or biologic product may be eligible for a limited patent term extension under the Hatch-Waxman Act, which permits a patent extension of up to five years beyond the expiration date of a U.S. patent as partial compensation for the useful patent term lost, if any, during the FDA regulatory review process. However, a patent term extension cannot extend the remaining term of a patent beyond a total of 14 years from the date of the product’s approval by the FDA. The patent term extension period granted is typically one-half the time between the effective date of the first IND and the submission date of the NDA for the product, plus the time between the submission date of the NDA and the approval of that application. Only one patent applicable to an approved product is eligible for the extension, and the application for the extension must be submitted prior to the expiration of the patent in question. A patent that covers multiple products for which approval is sought can only be extended in connection with one of the products. The USPTO reviews and approves the application for any patent term extension or restoration in consultation with the FDA.
Regulation Outside the United States
In order to market any product outside of the United States, a company must also comply with numerous and varying regulatory requirements of other countries and jurisdictions regarding quality, safety and efficacy that govern, among other things, clinical trials, marketing authorization, commercial sales and distribution of drug products. Whether or not it obtains FDA approval for a product, the company would need to obtain the necessary approvals by the comparable non-U.S. regulatory authorities before it can commence clinical trials or marketing of the product in those countries or jurisdictions. The approval process ultimately varies between countries and jurisdictions and can involve additional product testing and additional administrative review periods. The time required to obtain approval in other countries and jurisdictions might differ from and be longer than that required to obtain FDA approval. Regulatory approval in one country or jurisdiction does not ensure regulatory approval in another, but a failure or delay in obtaining regulatory approval in one country or jurisdiction may negatively impact the regulatory process in others.
Regulation and Marketing Authorization in the European Union
The European Medicines Agency, or EMA, is the scientific agency of the European Union, or EU, that coordinates the evaluation and monitoring of new and approved medicinal products such as drugs and biologics. It is responsible for the scientific evaluation of applications for EU marketing authorizations, as well as the development of technical guidance and the provision of scientific advice to sponsors.
The process regarding approval of medicinal products in the EU follows roughly the same lines as in the United States and likewise generally involves satisfactorily completing each of the following:
• preclinical laboratory tests, animal studies and formulation studies all performed in accordance with the applicable EU Good Laboratory Practice regulations;
• submission to the relevant regulatory agencies in EU member states, or national authorities, of a clinical trial application, or CTA, for each clinical trial, which must be approved before human clinical trials may begin;
• performance of adequate and well-controlled clinical trials to establish the safety and efficacy of the product for each proposed indication;
• submission to the relevant national authorities of a Marketing Authorisation Application, or MAA, which includes the data supporting safety and efficacy as well as detailed information on the manufacture and composition of the product in clinical development and proposed labeling;
• satisfactory completion of an inspection by the relevant national authorities of the manufacturing facility or facilities, including those of third parties, at which the product is produced to assess compliance with cGMP;
• potential audits of the non-clinical and clinical trial sites that generated the data in support of the MAA; and
• review and approval by the relevant national authority of the MAA before any commercial marketing, sale or shipment of the product.
28
Preclinical Studies
Preclinical tests include laboratory evaluations of product chemistry, formulation and stability, as well as studies to evaluate the potential efficacy and toxicity in animals. The conduct of the preclinical tests and formulation of the compounds for testing must comply with the relevant EU regulations and requirements. The results of the preclinical tests, together with relevant manufacturing information and analytical data, are submitted as part of the CTA when seeking approval to start a clinical trial, and with the MAA when seeking marketing authorization.
Clinical Trial Approval
Requirements for the conduct of clinical trials in the EU including cGCP, are implemented in the currently Clinical Trials Directive 2001/20/EC and the GCP Directive 2005/28/EC. Pursuant to Directive 2001/20/EC and Directive 2005/28/EC, as amended, a system for the approval of clinical trials in the EU has been implemented through national legislation of the EU member states. Under this system, approval must be obtained from the competent national authority in which a trial is planned to be conducted, or in multiple member states if the clinical trial is to be conducted in a number of member states. To this end, a CTA is submitted, which must be supported by an investigational medicinal product dossier, or IMPD, and further supporting information prescribed by Directive 2001/20/EC and Directive 2005/28/EC and other applicable guidance documents. Furthermore, a clinical trial may only be started after a competent ethics committee has issued a favorable opinion on the clinical trial application in that country.
On January 31, 2022, the Clinical Trials Regulation (EU) No. 536/2014 replaced the current Clinical Trials Directive 2001/20/EC. To ensure that the rules for clinical trials are identical throughout the EU, the Clinical Trials Regulation (EU) No. 536/2014 was passed as a regulation which is directly applicable in all EU member states. The Clinical Trials Directive 2001/20/EC will, however, still apply three years from the date of entry into application of the Clinical Trials Regulation to (i) clinical trials applications submitted before the entry into application and (ii) clinical trials applications submitted within one year after the entry into application if the sponsor opts for the old system.
Regulation (EU) No 536/2014 aims to simplify and streamline the approval of clinical trial in the EU. The main characteristics of the regulation include:
• A streamlined application procedure via a single entry point, known as the Clinical Trials Information System;
• A single set of documents to be prepared and submitted for the application as well as simplified reporting procedures which will spare sponsors from submitting broadly identical information separately to various and different national authorities;
• A harmonized procedure for the assessment of applications for clinical trials, which is divided in two parts;
• Strictly defined deadlines for the assessment of clinical trial application; and
• The involvement of the ethics committees in the assessment procedure in accordance with the national law of the member state concerned but within the overall timelines defined by the Regulation (EU) No 536/2014.
Marketing Authorization
Authorization to market a product in the member states of the EU proceeds under one of four procedures: a centralized procedure, a mutual recognition procedure, a decentralized procedure or a national procedure.
Centralized Procedure
The centralized procedure enables applicants to obtain a marketing authorization that is valid in all EU member states based on a single application. Certain medicinal products, including products developed by means of biotechnological processes must undergo the centralized authorization procedure for marketing authorization, which, if granted by the European Commission, based on the opinion of the EMA, is automatically valid in all EU member states. Sponsors may elect to file an MAA through the centralized procedures for other classes of products.
29
The centralized procedure is mandatory for certain types of products such as, medicines derived from biotechnology processes such as genetic engineering, advanced-therapy medicines such as gene-therapy or tissue engineered medicine, orphan medicines, and medicinal products containing a new active substance indicated for the treatment of HIV, AIDS, cancer, diabetes, neurodegenerative disorders, autoimmune and other immune dysfunctions, and viral diseases. The centralized authorization procedure is optional for other medicinal products if they contain a new active substance, if the applicant shows that the medicinal product concerned constitutes a significant therapeutic, scientific or technical innovation, or that the granting of authorization is in the public interest of the EU.
Administrative Procedure
Under the centralized procedure, the EMA’s Committee for Human Medicinal Products, or CHMP serves as the scientific committee that renders opinions about the safety, efficacy and quality of medicinal products for human use on behalf of the EMA. The CHMP is composed of experts nominated by each member state’s national authority for medicinal products, with one of them appointed to act as Rapporteur for the coordination of the evaluation with the possible assistance of a further member of the Committee acting as a Co-Rapporteur. After approval, the Rapporteur(s) continue to monitor the product throughout its life cycle. The CHMP has 210 active days to adopt an opinion as to whether a marketing authorization should be granted. The process usually takes longer in case additional information is requested, which triggers clock-stops in the procedural timelines. The process is complex and involves extensive consultation with the regulatory authorities of member states and a number of experts. When an application is submitted for a marketing authorization in respect of a drug which is of major interest from the point of view of public health and in particular from the viewpoint of therapeutic innovation, the applicant may, pursuant to Article 14(9) Regulation (EC) No 726/2004, request an accelerated assessment procedure. If the CHMP accepts such request, the time-limit of 210 days will be reduced to 150 days but it is possible that the CHMP can revert to the standard time-limit for the centralized procedure if it considers that it is no longer appropriate to conduct an accelerated assessment. Once the procedure is completed, a European Public Assessment Report, or EPAR, is produced. If the opinion is negative, information is given as to the grounds on which this conclusion was reached. After the adoption of the CHMP opinion, a decision on the MAA must be adopted by the European Commission, after consulting the EU member states, which in total can take more than 60 days. After a drug has been authorized and launched, it is a condition of maintaining the marketing authorization that all aspects relating to its quality, safety and efficacy must be kept under review.
Conditional Approval
In specific circumstances, EU legislation (Article 14(7) Regulation (EC) No 726/2004 and Regulation (EC) No 507/2006 on Conditional Marketing Authorisations for Medicinal Products for Human Use) enables applicants to obtain a conditional marketing authorization prior to obtaining the comprehensive clinical data required for an application for a full marketing authorization. Such conditional approvals may be granted for products (including medicines designated as orphan medicinal products), if (1) the risk-benefit balance of the product is positive, (2) it is likely that the applicant will be in a position to provide the required comprehensive clinical trial data, (3) the product fulfills unmet medical needs, and (4) the benefit to public health of the immediate availability on the market of the medicinal product concerned outweighs the risk inherent in the fact that additional data are still required. A conditional marketing authorization may contain specific obligations to be fulfilled by the marketing authorization holder, including obligations with respect to the completion of ongoing or new studies, and with respect to the collection of pharmacovigilance data. Conditional marketing authorizations are valid for one year, and may be renewed annually, if the risk-benefit balance remains positive, and after an assessment of the need for additional or modified conditions and/or specific obligations. The timelines for the centralized procedure described above also apply with respect to the review by the CHMP of applications for a conditional marketing authorization.
Marketing Authorization Under Exceptional Circumstances
As per Article 14(8) Regulation (EC) No 726/2004, products for which the applicant can demonstrate that comprehensive data (in line with the requirements laid down in Annex I of Directive 2001/83/EC, as amended) cannot be provided (due to specific reasons foreseen in the legislation) might be eligible for marketing authorization under exceptional circumstances. This type of authorization is reviewed annually to reassess the risk-benefit balance. The fulfillment of any specific procedures/obligations imposed as part of the marketing authorization under exceptional circumstances is aimed at the provision of information on the safe and effective use of the product and will normally not lead to the completion of a full dossier/approval.
30
Period of Authorization and Renewals
A marketing authorization will be valid for five years in principle, and the marketing authorization may be renewed after five years on the basis of a re-evaluation of the risk-benefit balance by the EMA or by a national authority. To this end, the marketing authorization holder must provide the EMA or the competent authority with a consolidated version of the file in respect of quality, safety and efficacy, including all variations introduced since the marketing authorization was granted, at least nine months before the marketing authorization ceases to be valid. Once renewed, the marketing authorization will be valid for an unlimited period, unless the European Commission or the national authority decides, on justified grounds relating to pharmacovigilance, to proceed with one additional five-year renewal. Any authorization that is not followed by the actual placing of the drug on the EU market (in case of centralized procedure) or on the market of the authorizing member state within three years after authorization will cease to be valid, the so-called “sunset clause.”
Orphan Drug Designation and Exclusivity
The European Commission can grant orphan medicinal product designation to products for which the sponsor can establish that it is intended for the diagnosis, prevention, or treatment of (1) a life-threatening or chronically debilitating condition affecting not more than five in 10,000 people in the EU, or (2) a life threatening, seriously debilitating or serious and chronic condition in the EU and that without incentives it is unlikely that sales of the drug in the EU would generate a sufficient return to justify the necessary investment. In addition, the sponsor must establish that there is no other satisfactory method approved in the EU of diagnosing, preventing or treating the condition, or if such a method exists, the proposed orphan drug will be of significant benefit to patients.
Orphan drug designation provides a number of benefits, including fee reductions, regulatory assistance, and the possibility to apply for a centralized EU marketing authorization (see “—Government Regulation and Product Approval—Regulation Outside the United States—Centralized Authorization Procedure”), as well as 10 years of market exclusivity following a marketing authorization. During this market exclusivity period, neither the EMA, nor the European Commission nor the Member States can accept an application or grant a marketing authorization for a medicinal product containing a similar active substance or substances as contained in an authorized orphan medicinal product, and which is intended for the same therapeutic indication. The market exclusivity period for the authorized therapeutic indication may be reduced to six years if, at the end of the fifth year, it is established that the orphan drug designation criteria are no longer met, including where it is shown that the product is sufficiently profitable not to justify maintenance of market exclusivity. In addition, a competing similar medicinal product may be authorized prior to the expiration of the market exclusivity period, including if it is shown to be safer, more effective or otherwise clinically superior to the already approved orphan drug or if the holder of the marketing authorization for the already approved orphan drug is unable to supply sufficient quantities of the product.
If the MAA of a medicinal product designated as an orphan drug includes the results of all studies conducted in compliance with an agreed PIP, and a corresponding statement is subsequently included in the marketing authorization granted, the ten-year period of market exclusivity will be extended to twelve years.
Regulatory Data Protection
EU legislation also provides for a system of regulatory data and market exclusivity. Upon receiving marketing authorization, new chemical entities approved on the basis of complete independent data package benefit from eight years of data exclusivity and an additional two years of market exclusivity. Data exclusivity prevents regulatory authorities in the EU from referencing the innovator’s data to assess a generic or biosimilar (abbreviated) application. During the additional two-year period of market exclusivity, a generic or biosimilar marketing authorization can be submitted, and the innovator’s data may be referenced, but no generic or biosimilar medicinal product can be marketed until the expiration of the market exclusivity. The overall ten-year period will be extended to a maximum of eleven years if, during the first eight years of those 10 years, the marketing authorization holder, or MAH, obtains an authorization for one or more new therapeutic indications which, during the scientific evaluation prior to their authorization, are held to bring a significant clinical benefit in comparison with existing therapies. Even if a compound is considered to be a new chemical entity and the innovator is able to gain the period of data exclusivity, another company nevertheless could also market another version of the drug if such company obtained marketing authorization based on an MAA with a complete independent data package of pharmaceutical test, pre-clinical tests and clinical trials. However, products designated as orphan medicinal products enjoy, upon receiving marketing authorization, a period of 10 years of orphan market exclusivity (see also “—Government Regulation and Product Approval—Regulation and Marketing Authorization in the European Union—Orphan Drug Designation and Exclusivity”). Depending upon the timing and duration of the EU marketing authorization process, products may be eligible for up to five years’ supplementary protection certificates, or SPCs. Such SPCs extend the rights under the basic patent for the drug.
31
Regulatory Requirements After a Marketing Authorization Has Been Obtained
If we obtain authorization for a medicinal product in the EU, we will be required to comply with a range of requirements applicable to the manufacturing, marketing, promotion and sale of medicinal products:
Pharmacovigilance and Other Requirements
We will, for example, have to comply with the EU’s stringent pharmacovigilance or safety reporting rules, pursuant to which post-authorization studies and additional monitoring obligations can be imposed.
Other requirements relate to, for example, the manufacturing of products and APIs in accordance with good manufacturing practice standards. EU regulators may conduct inspections to verify our compliance with applicable requirements, and we will have to continue to expend time, money and effort to remain compliant. Non-compliance with EU requirements regarding safety monitoring or pharmacovigilance, and with requirements related to the development of products for the pediatric population, can also result in significant financial penalties in the EU. Similarly, failure to comply with the EU’s requirements regarding the protection of individual personal data can also lead to significant penalties and sanctions. Individual EU member states may also impose various sanctions and penalties in case we do not comply with locally applicable requirements.
Manufacturing
The manufacturing of authorized drugs, for which a separate manufacturer’s license is mandatory, must be conducted in compliance with the EMA’s cGMP requirements and comparable requirements of other national authorities, which mandate the methods, facilities and controls used in manufacturing, processing and packing of drugs to assure their safety and identity. The EMA enforces its cGMP requirements through mandatory registration of facilities and inspections of those facilities. The EMA may have a coordinating role for these inspections while the responsibility for carrying them out rests with the member states competent authority under whose responsibility the manufacturer falls. Failure to comply with these requirements could interrupt supply and result in delays, unanticipated costs and lost revenues, and could subject the applicant to potential legal or regulatory action, including but not limited to warning letters, suspension of manufacturing, seizure of product, injunctive action or possible civil and criminal penalties.
Marketing and Promotion
The marketing and promotion of authorized drugs, including industry-sponsored continuing medical education and advertising directed toward the prescribers of drugs and/or the general public, are strictly regulated in the EU. The applicable regulations aim to ensure that information provided by holders of marketing authorizations regarding their products is truthful, balanced and accurately reflects the safety and efficacy claims authorized by the EMA or by the national authority of the authorizing member state. Failure to comply with these requirements can result in adverse publicity, warning letters, corrective advertising and potential civil and criminal penalties.
Clinical Testing in Israel
In order to conduct clinical trials on humans in Israel, prior authorization must be obtained from the medical director of the institution (i.e., the Director of Hospital – DOH) in which the clinical trials are scheduled to be conducted. All clinical trials must first be approved by the Institutional Review Board (IRB) / Independent Ethics Committee (IEC) which may request additional prior approval from the Israeli Ministry of Health (IMOH), as required under the Guidelines for Clinical Trials in Human Subjects implemented pursuant to the Israeli Public Health Regulations (Clinical Trials in Human Subjects), 5740-1980, as amended from time to time. Pursuant to the Israeli Public Health Regulations, such authorization generally cannot be granted unless, among other things, the relevant institutions ethics committee has provided its prior approval of the testing and that the trial complies with the standards set forth by the Declaration of Helsinki. The Ministry of Health has provided emergency guidance associated with COVID-19 in March 2020 for ongoing clinical trials, which we are complying with, and may issue additional guidance that may impact our ability to complete our ongoing clinical trials of EB613 in Osteoporosis.
The IRB/IEC and IMOH prioritizes the safety, rights and the wellbeing of the participants are addressed, as well as among other things, evaluating the anticipated benefits that are likely to be derived from the project to determine if it justifies the risks and inconvenience to be inflicted on the participating human subjects. The institution may also conduct audits to insure that all international GCP and IMOH guidelines are being adhered to in order to maintain the proper conduct and accuracy of the information gathered in the course of the clinical testing.
32
Other Healthcare Laws
Health care providers, physicians and third-party payers play a primary role in the recommendation and prescription of drug products that are granted marketing approval. Arrangements with third-party payers and customers are subject to broadly applicable fraud and abuse and other health care laws and regulations. In the United States, such restrictions under applicable federal and state healthcare laws and regulations, include the following:
• the federal Anti-Kickback Statute prohibits, among other things, the knowing and willful offer, payment, solicitation or receipt of any form of remuneration in return for, or to induce, (i) the referral of a person, (ii) the furnishing or arranging for the furnishing of items or services reimbursable under the Medicare, Medicaid or other governmental programs, or (iii) the purchase, lease or order or arranging or recommending purchasing, leasing or ordering of any item or service reimbursable under the Medicare, Medicaid or other governmental programs. A person or entity does not need to have actual knowledge of the federal Anti-Kickback Statute or specific intent to violate it to have committed a violation; in addition, items or services resulting from a violation of the federal Anti-Kickback Statute may constitute a false or fraudulent claim for purposes of the False Claims Act;
• the federal False Claims Act imposes civil penalties, and provides for civil whistleblower or qui tam actions, against individuals or entities for knowingly presenting, or causing to be presented, to the federal government, claims for payment that are false or fraudulent or making a false statement to avoid, decrease or conceal an obligation to pay money to the federal government;
• the Health Insurance Portability and Accountability Act of 1996, or HIPAA, imposes criminal and civil liability for executing a scheme to defraud any health care benefit program or making false statements relating to health care matters. Similar to the federal Anti-Kickback Statute, a person or entity does not need to have actual knowledge of the statute or specific intent to violate it to have committed a violation;
• the federal false statements statute prohibits knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false statement in connection with the delivery of or payment for health care benefits, items or services;
• HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act, which governs the conduct of certain electronic healthcare transactions and protects the security and privacy of protected health information that is stored or transmitted electronically;
• the Physician Payments Sunshine Act, created under the ACA, and its implementing regulations, which requires specified manufacturers of drugs, devices, biologics and medical supplies for which payment is available under Medicare, Medicaid or the Children’s Health Insurance Program, with specific exceptions, to report annually to the Centers for Medicare & Medicaid Services, or CMS, information related to payments or other “transfers of value” made to physicians. All such reported information is publicly available;
• analogous state and non-U.S. laws and regulations, such as state anti-kickback and false claims laws which may apply to items or services reimbursed by any payer, including commercial insurers; state laws that require pharmaceutical companies to comply with the industry’s voluntary compliance guidelines and the applicable compliance guidance promulgated by the federal government or otherwise restrict payments that may be made to healthcare providers and other potential referral sources; state laws that require pharmaceutical manufacturers to report information related to payments and other transfers of value to physicians and other healthcare providers or marketing expenditures; and state laws governing the privacy and security of health information in certain circumstances, many of which differ from each other in significant ways and may not have the same effect, thus complicating compliance efforts; and
• regulation by the Centers for Medicare and Medicaid Services and enforcement by the U.S. Department of Health and Human Services Office of Inspector General or the U.S. Department of Justice.
Because of the breadth of these laws and the narrowness of the statutory exceptions and safe harbors available, it is possible that some of our future business activities could be subject to challenge under one or more of such laws. Efforts to ensure that our business arrangements with third parties will comply with applicable laws and regulations will involve substantial costs. It is possible that governmental authorities will conclude that our business practices may not comply with current or future statutes, regulations or case law involving applicable fraud and abuse or other health care laws and regulations. If our operations are found to be in violation of any of these laws or any other governmental regulations that may apply to us, we may be subject to significant civil, criminal and administrative penalties, damages, fines, exclusion from government funded health care programs, such as Medicare and Medicaid, and the curtailment or restructuring of our operations. If any of the physicians or other providers or entities with whom we expect to do business are found to be not in compliance with applicable laws, they may be subject to criminal, civil or administrative sanctions, including exclusions from government funded health care programs.
33
Environmental, Health and Safety
We are further subject to various foreign, national, federal, state and local laws and regulations relating to environmental, health and safety matters, in a number of jurisdictions, governing, inter alia, (i) the use, storage, registration, handling, emission and disposal of chemicals, waste materials and sewage; and (ii) chemical, air, water and ground contamination, air emissions and the cleanup of contaminated sites, including any contamination that results from spills due to our failure to properly dispose of chemicals, waste materials and sewage. Our operations at our Jerusalem research and development facility use chemicals and produce waste materials and sewage. Our activities require permits from various governmental authorities including, local municipal authorities, the Ministry of Environmental Protection and the Ministry of Health. The Ministry of Environmental Protection and the Ministry of Health, local authorities and the municipal water and sewage company may conduct periodic inspections in order to review and ensure our compliance with the various regulations.
Although we do not believe that we will be required to make material operating or capital expenditures in connection with such laws and regulations, we may be required to incur significant costs to comply with these laws and regulations in the future, and complying with these laws and regulations may result in a material adverse effect upon our business, financial condition and results of operations. Further, our failure to comply with such laws and regulations could have a material adverse effect on our business and reputation, result in an interruption or delay in the development or manufacture of our products, or increase the costs for the development or manufacture of our products.
In addition, laws and regulations relating to environmental, health and safety matters are often subject to change. In the event of any changes or new laws or regulations, we could be subject to new compliance measures or to penalties for activities which were previously permitted. For instance, Israeli regulations were promulgated in 2011 relating to the discharge of industrial sewage into the sewer system. These regulations establish new and potentially significant fees for discharging forbidden or irregular sewage into the sewage system.
Pharmaceutical Pricing and Reimbursement
Significant uncertainty exists as to the coverage and reimbursement status of any drug products for which we plan to seek regulatory approval. Sales of any of our product candidates, if approved, will depend, in part, on the extent to which the costs of the products will be covered by third-party payors, including government health programs such as Medicare and Medicaid, commercial health insurers and managed care organizations. Concerns about drug pricing have been expressed by both members of the United States Congress and the administration. The process for determining whether a payer will provide coverage for a drug product may be separate from the process for setting the price or reimbursement rate that the payer will pay for the drug product once coverage is approved. Third-party payers may limit coverage to specific drug products on an approved list, or formulary, which might not include all of the approved drugs for a particular indication.
In order to secure coverage and reimbursement for any product that might be approved for sale, we may need to conduct expensive pharmacoeconomic studies in order to demonstrate the medical necessity and cost-effectiveness of the product, in addition to the costs required to obtain FDA, EMA or other comparable regulatory approvals. Our product candidates may not be considered medically necessary or cost-effective. A payer’s decision to provide coverage for a drug product does not imply that an adequate reimbursement rate will be approved. Third-party reimbursement may not be sufficient to enable us to maintain price levels high enough to realize an appropriate return on our investment in product development.
The containment of healthcare costs has become a priority of governments, and the prices of drugs have been a focus in this effort. Third-party payers are increasingly challenging the prices charged for medical products and services and examining the medical necessity and cost effectiveness of medical products in addition to their safety and efficacy. If these third-party payors do not consider our products to be cost-effective compared to other available therapies, they may not cover our products if approved under their plans or, if they do, the level of payment may not be sufficient to allow us to sell our products at a profit. The U.S. government, state legislatures and non-U.S. governments have shown significant interest in implementing cost containment programs to limit the growth of government-paid health care costs, including price controls, restrictions on reimbursement and requirements for substitution of generic products for branded prescription drugs. Adoption of such controls and measures, and tightening of restrictive policies in jurisdictions with existing controls and measures, could limit payments for pharmaceuticals such as the product candidates that we are developing and could adversely affect our net revenue and results.
34
Pricing and reimbursement schemes vary widely from country to country. Some countries provide that drug products may be marketed only after a reimbursement price has been agreed. Some countries may require the completion of additional studies that compare the cost-effectiveness of a particular product candidate to currently available therapies. The conduct of such studies could be expensive and result in delays in our commercializing efforts. The EU provides options for its member states to restrict the range of drug products for which their national health insurance systems provide reimbursement and to control the prices of medicinal products for human use. EU member states may approve a specific price for a drug product or may instead adopt a system of direct or indirect controls on the profitability of the company placing the drug product on the market. Other member states allow companies to fix their own prices for drug products, but monitor and control company profits. The downward pressure on health care costs in general, particularly prescription drugs, has become very intense. As a result, increasingly high barriers are being erected to the entry of new products. In addition, in some countries, cross-border imports from low-priced markets exert competitive pressure that may reduce pricing within a country. There can be no assurance that any country that has price controls or reimbursement limitations for drug products will allow favorable reimbursement and pricing arrangements for any of our products.
The marketability of any products for which we receive regulatory approval for commercial sale may suffer if the government and third-party payors fail to provide adequate coverage and reimbursement. In addition, emphasis on managed care in the United States has increased and we expect will continue to increase the pressure on drug pricing. Coverage policies, third-party reimbursement rates and drug pricing regulation may change at any time. Even if favorable coverage and reimbursement status is attained for one or more products for which we receive regulatory approval, less favorable coverage policies and reimbursement rates may be implemented in the future.
Health Care Reform
In the United States, there have been and continue to be a number of significant legislative initiatives to contain healthcare costs. The ACA was enacted in the United States in March 2010 and contains provisions that may reduce the profitability of drug products, including, for example, increased rebates for drugs subject to the Medicaid Drug Rebate Program, extension of Medicaid rebates to Medicaid managed care plans, mandatory discounts for certain Medicare Part D beneficiaries and annual fees based on pharmaceutical companies’ share of sales to federal health care programs.
In addition, other legislative changes have been proposed and adopted since the ACA was enacted. These changes included aggregate reductions to Medicare payments to providers of 2% per fiscal year, effective April 1, 2013 and, due to subsequent legislative amendments to the statute, will stay in effect through 2027, unless additional Congressional action is taken; however, pursuant to the CARES Act, and subsequent legislation, these reductions are suspended from May 1, 2020 through March 31, 2022 due to the COVID-19 pandemic. In January 2013, the American Taxpayer Relief Act of 2012 was signed into law, which, among other things, reduced Medicare payments to several providers, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years. These laws may result in additional reductions in Medicare and other healthcare funding, which could have a material adverse effect on customers for our drugs, if approved, and, accordingly, our financial operations.
Moreover, recently there has been heightened governmental scrutiny over the manner in which manufacturers set prices for their commercial products. There have been several recent U.S. Congressional inquiries and proposed and enacted federal and state legislation designed to, among other things, bring more transparency to drug pricing, review the relationship between pricing and manufacturer patient programs, reduce the cost of drugs under Medicare, and reform government program reimbursement methodologies for drugs. The FDA released a final rule on September 24, 2020, effective November 30, 2020, providing guidance for states to build and submit importation plans for drugs from Canada. Further, on November 20, 2020, the U.S. Department of Health and Human Services, or HHS, finalized a regulation removing safe harbor protection for price reductions from pharmaceutical manufacturers to plan sponsors under Part D, either directly or through pharmacy benefit managers, unless the price reduction is required by law. The rule also creates a new safe harbor for price reductions reflected at the point-of-sale, as well as a safe harbor for certain fixed fee arrangements between pharmacy benefit managers and manufacturers. At the state level, legislatures have increasingly passed legislation and implemented regulations designed to control pharmaceutical and biological product pricing, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures, and, in some cases, designed to encourage importation from other countries and bulk purchasing. Although a number of these, and other proposed measures may require authorization through additional legislation to become effective, Congress has indicated that it will continue to seek new legislative measures to control drug costs.
35
Additionally, CMS issued a final rule, effective on July 9, 2019, that requires direct-to-consumer advertisements of prescription drugs and biological products, for which payment is available through or under Medicare or Medicaid, to include in the advertisement the Wholesale Acquisition Cost, or list price, of that drug or biological product if it is equal to or greater than $35 for a monthly supply or usual course of treatment. Prescription drugs and biological products advertisements that are in violation of these requirements will be included on a public list.
Any adopted health reform measure could reduce the ultimate demand for our products, if approved, or put pressure on our product pricing. Individual states in the United States have also become increasingly active in passing legislation and implementing regulations designed to control pharmaceutical product pricing, including price or patient reimbursement constraints, discounts, restrictions on certain product access and marketing cost disclosure and transparency measures, and, in some cases, designed to encourage importation from other countries and bulk purchasing. In addition, regional healthcare authorities and individual hospitals are increasingly using bidding procedures to determine what pharmaceutical products and which suppliers will be included in their prescription drug and other healthcare programs. We expect that additional state and federal healthcare reform measures will be adopted in the future.
We expect that additional state and federal healthcare reform measures, as well as legal changes by foreign governments, will be adopted in the future, any of which could limit the amounts that governments will pay for healthcare products and services, which could result in reduced demand for our product candidates or additional pricing pressures.
Employees
As of December 31, 2021, we had 21 employees and consultants based in Israel, including 18 full-time employees, two part time employees, and one part-time consultant who serves as our Israel-based CFO. In addition, we had one employee and four consultants based in the United States, including Chief Executive Officer, our Chief Medical Officer and our U.S-based CFO. Six of our employees and consultants have either PhDs or MDs. The distribution of our full-time employees according to main areas of activity is set forth in the following table:
Employees
Area of Activity:
Research and development
16
General and administrative
3
Total
19
Israeli labor laws govern the length of the workday and workweek, minimum wages for employees, procedures for hiring and dismissing employees, determination of severance pay, annual leave, sick days, advance notice of termination, payments to the National Insurance Institute, and other conditions of employment and include equal opportunity and anti-discrimination laws. While we are not, and none of our employees is, party to any collective bargaining agreements, certain provisions of the collective bargaining agreements between the Histadrut (General Federation of Labor in Israel) and the Coordination Bureau of Economic Organizations (including the Industrialists’ Associations) are applicable to our employees in Israel by order of the Israeli Ministry of the Economy. These provisions primarily concern pension fund benefits for all employees, insurance for work-related accidents, recuperation pay and travel expenses. We generally provide our employees with benefits and working conditions beyond the required minimums. We have never experienced any employment-related work stoppages and believe our relationships with our employees are good.
Facilities
For more information regarding our facilities, see “Item 2—Properties.”
Legal Proceedings
For more information regarding legal proceedings, see ‘Item 3—Legal Proceedings.”
36
Additional Information
Our website is at www.enterabio.com . We make available, free of charge, on our investor relations section under the heading “SEC Filings” our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and any amendments to those reports filed with or furnished to the SEC pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC. Our website address is included in this report only as an inactive textual reference. Information contained on, or available through, our website is not incorporated by reference in, or made a part of, this report.
Text extracted from the filing as submitted to EDGAR. Formatting, tables and exhibits are simplified for reading; the original document is authoritative for anything you rely on.