Worksport Ltd 10-K

ITEM 1A. RISK FACTORS In addition to the other information set forth in this report, you should carefully consider the following factors, which could materially affect our business, financial condition or future results. The risks described below are not the only risks we face. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially affect our business, financial condition or results of operations. The risks are listed below in no particular order. Risks Related to Our Business Various factors raise substantial doubt about the Company’s ability to continue as a going concern. The Company has incurred significant losses since its inception, including a net loss of $16,163,789 for the year ended December 31, 2024, and has an accumulated deficit of $64,476,966 as of December 31, 2024. These factors, among others, raise substantial doubt about the Company’s ability to continue as a going concern. The Company’s continuation as a going concern is dependent upon its ability to generate positive cash flows from operations and to secure additional sources of equity and/or debt financing. Despite the Company’s intent to fund operations through equity and debt financing arrangements, there is no assurance that such financing will be available on terms acceptable to the Company, if at all. Our independent auditors have included an explanatory paragraph in their audit report regarding the Company’s ability to continue as a going concern. This going concern risk may materially limit our ability to raise additional funds through the issuance of new debt or equity or may adversely affect the terms upon which such capital may be available. The inability to obtain sufficient financing on acceptable terms could have a material adverse effect on the Company’s financial condition, results of operations, and business prospects. The Company is actively pursuing strategies to mitigate these risks, focusing on transitioning towards revenue generation from its existing product offerings and expanding its customer base. However, there can be no assurance that these efforts will prove successful or that the Company will achieve its intended financial stability. The failure to successfully address these going concern risks may materially and adversely affect the Company’s business, financial condition, and results of operations. Investors should consider the substantial risks and uncertainties inherent in the Company’s business before investing in the Company’s securities. Our business, results of operations and financial condition could be adversely affected by the effects of widespread public health pandemics, such as COVID-19, that are beyond our control. A significant outbreak, epidemic or pandemic of contagious diseases in any geographic area in which we operate or plan to operate could result in a health crisis adversely affecting the economies and financial markets in which we operate as well as the overall demand for our products. In addition, any preventative or protective actions that governments implement or that we take in response to a health crisis, such as travel restrictions, quarantines, or site closures, may interfere with the ability of our employees, suppliers and customers to perform their responsibilities. Such results could have a materially adverse effect on our business. To the extent the COVID-19 pandemic or a similar public health threat has an impact on our business, it is likely to also have the effect of heightening many of the other risks described in this “ Risk Factors ” section. 16 We are a growth stage company with a history of losses and expect to incur significant expenses and continuing losses for the foreseeable future. We have incurred net losses since our inception. In the twelve months ended December 31, 2024 and 2023, we incurred operating losses of $16,163,789 and $14,928,958, respectively, and as of December 31, 2024, we had an accumulated deficit of $64,476,966. We believe net operating losses will decrease or become net income in the near future as we ramp up sales of our AL3 tonneau covers and launch highly-anticipated product lines, such as our AL4 and SOLIS tonneau covers; however, these product launches will require additional investments, and we will need to invest in additional research and development for our COR energy storage systems and future product lines. The market releases for these additional product lines may occur later than we expect or not at all. We are unsure whether we will be profitable in the near future while we continue to ramp up our product offerings, bolster our sales channels, and increase output capacity, and we cannot assure you that we will ever achieve or be able to maintain profitability in the future. Even if we can successfully develop our additional products and attract customers, there can be no assurance that we will be financially successful. For example, as we expand our product portfolio, and expand internationally, we will need to manage costs effectively to sell those products at our expected margins. Failure to become profitable would materially and adversely affect the value of your investment. If we are ever to achieve profitability, it will be dependent upon the successful development and commercial introduction and acceptance of our consumer products, and our services, which may not occur. We may not succeed in establishing, maintaining and strengthening our brand, which would materially and adversely affect customer acceptance of our products and our business, prospects, financial condition, results of operations and cash flows. Our business and prospects heavily depend on our ability to develop, maintain and strengthen the Worksport brand. If we are not able to establish, maintain and strengthen our brand, we may lose the opportunity to build a critical mass of customers. Our ability to develop, maintain and strengthen our brand will depend heavily on our ability to provide high quality products and engage with our customers as intended, as well as depend on the success of our customer development and marketing efforts. The automobile accessory and parts industry is intensely competitive, and we may not be successful in building, maintaining and strengthening the Worksport brand. Many of our current and potential competitors have greater name recognition, broader customer relationships and substantially greater marketing resources than we do. If we do not develop and maintain a strong brand, our business, prospects, financial condition, results of operations and cash flows could be materially and adversely impacted. In addition, we could be subject to adverse publicity. In particular, given the popularity of social media, any negative publicity, whether true or not, could quickly proliferate and harm consumer perceptions and confidence in our brand. In addition, from time to time, our products may be evaluated and reviewed by third parties. Any negative reviews or reviews which compare us unfavorably to competitors could adversely affect consumer perception about our products. The US Central Bank has provided forward-looking guidance of relatively high interest rates plateauing for the near future. We may need to invest in additional machinery, equipment and land if demand for our products is higher than anticipated or if we secure a supplier deal with a major original equipment manufacturer (OEM). With high interest rates, it will be less financially attractive to finance such purchases, which may lead to an otherwise higher burn rate. High interest rates increase the amount that we must pay for our mortgage on our West Seneca, NY property. At the same time, it lowers the attractiveness of refinancing, despite the fact that our anticipated positive future cash flows would allow us to seek financing from a broader selection of lenders. 17 Continued uncertain economic conditions, including inflation and the risk of a global recession could impair our ability to forecast and may harm our business, operating results, including our revenue growth and profitability, financial condition and cash flows. While U.S. inflation rates have come down substantially from their 2022 highs, the U.S. economy is still experiencing higher than target inflation rates, and high levels of inflation persist in many countries around the world. Historically, we have not experienced significant inflation risk in our business. However, our ability to raise our product prices depends on market conditions, and there may be periods during which we are unable to fully recover increases in our costs. In addition, the global economy suffers from slowing growth and elevated interest rates, and many economists are still unsure whether a global recession may begin in the near future. If the global economy slows, our business would likely be adversely affected. Also, a recession may result in job loss and lower discretionary funds among potential customers, lowering demand for automotive aftermarket accessories. Part of our consumer base for SOLIS includes workers, particularly those in manufacturing and construction environments, who may have lower job security in the event of a recession and, thus, have lower demand for the SOLIS. Commercial real estate values may also decrease, which would lower the value of our production facility in West Seneca, NY. Our business and operations would suffer in the event of computer system failures, cyberattacks or a deficiency in our cybersecurity or a natural disaster. There are growing risks related to the security, confidentiality and integrity of personal and corporate information stored and transmitted electronically due to increasingly diverse and sophisticated threats to networks, systems and data security. Potential attacks span a spectrum from attacks by criminal hackers, hacktivists, and nation state or state-sponsored actors, to employee malfeasance and human or technological error. Despite the implementation of security measures, our internal computer systems, and those of third parties on which we rely (including our vendors, contractors and other third-party partners who process information on our behalf or have access to our systems), are vulnerable to damage from computer viruses, malware, ransomware, phishing attacks and other forms of social engineering, denial-of-service attacks, third party or employee theft or misuse and other negligent actions, natural disasters, terrorism, war, telecommunication and electrical failures, cyberattacks or cyber-intrusions over the internet, security incidents, disruptions, attachments to emails, persons inside our organization, or persons with access to systems inside our organization. The risk of a security breach or disruption, particularly through cyberattacks or cyber intrusion, including by computer hackers, foreign governments, and cyber terrorists, has generally increased as the number, intensity and sophistication of attempted attacks and intrusions from around the world have increased. If such an event were to occur and cause interruptions in our operations, it could result in a material disruption of our product development programs. To the extent that any disruption or security breach was to result in a loss of or damage to our data or applications, or inappropriate disclosure of confidential or proprietary information, we could incur material legal claims (including class claims) and liability, substantial remediation costs, regulatory enforcement, liability under data protection laws, additional reporting requirements and damage to our reputation, and the further development of our product lines could be delayed. To mitigate risks associated with cybersecurity attacks, we have cybersecurity insurance coverage in the aggregate amount of $1,000,000 per annual policy period, which covers damages from a range of potential cybersecurity issues including but not limited to property damage, privacy liability, privacy regulatory defense, cyber extortion, and post breach remediation. We may not be able to accurately estimate the demand for our tonneau covers, which could result in inefficiencies in our production and hinder our ability to generate profits. If we fail to accurately predict our manufacturing requirements, we will incur the risk of having to pay for production capacities that we reserved but will not be able to use or that we will not be able to secure sufficient additional production capacities at reasonable costs in the event product demand exceeds expectations. A single contract with an OEM, private label or key distributor can significantly increase demand for our products, requiring investments in expanded operational capacity including personnel, equipment and potentially facilities. 18 Our future growth may be limited. Our ability to achieve our expansion objectives and to manage our growth effectively depends upon a variety of factors, including our ability to internally develop products, to attract and retain skilled employees, to successfully position and market our products, to protect our existing intellectual property, to capitalize on the potential opportunities we are pursuing with third parties, and to acquire sufficient funding whether internally or externally. To accommodate growth and compete effectively, we will need working capital to maintain adequate inventory levels, develop additional procedures and controls and increase, train, motivate and manage our workforce. There is no assurance that our personnel, systems, procedures and controls will be adequate to support our potential future operations. There is no assurance that we will generate higher revenues from our prospective sales partners nor be able to capitalize on additional third-party manufacturers. We rely on two suppliers for the production of our outsourced finished goods which may hinder our ability to grow. We purchase all of our soft tonneau covers from two supplier sources in China. We carry significant strategic inventories of these finished goods to reduce the risk associated with this concentration of suppliers. Strategic inventories are managed based on demand. While we are now manufacturing hard covers in the United States, the loss of one or both of these suppliers or a delay in shipments could have a material adverse effect on our soft tonneau cover sales and business. We will need additional financing in order to grow our business. From time to time, in order to expand operations to meet customer demand, we will need to incur additional capital expenditures. These capital expenditures are intended to be funded from third party sources, including the incurring of debt and/or the sale of additional equity securities. In addition to requiring additional financing to fund capital expenditures, we may require additional financing to fund working capital, research and development, sales and marketing, general and administrative expenditures and operating losses. The incurrence of debt creates additional financial leverage and therefore an increase in the financial risk of our operations. The sale of additional equity securities will be dilutive to the interests of current equity holders. In addition, there can be no assurance that such additional financing, whether debt or equity, will be available to us or that it will be available on acceptable commercial terms. Any inability to secure such additional financing on appropriate terms could have a materially adverse impact on our business, financial condition and operating results. We rely on key personnel, especially Steven Rossi, our Chief Executive Officer, President and Chairman of the Board. Our success also will depend in large part on the continued service of our key operational and management personnel, including executive, research and development, engineering, marketing and sales staff. Most specifically, this includes Steven Rossi, our President and Chief Executive Officer, who oversees the implementation of new products, key customer acquisition and retention, and our overall management and future growth. Any failure on our part to hire, train and retain a sufficient number of qualified professionals could impair our business. 19 We depend on intellectual property rights that may be infringed upon, and we may infringe upon the intellectual property rights of others. Our success depends to a significant degree upon our ability to develop, maintain and protect proprietary products and technologies. As of December 31, 2024, we own 18 utility patents, 23 design registrations, and 79 pending utility and design patent applications worldwide. However, patents provide only limited protection of our intellectual property. The assertion of patent protection involves complex legal and factual determinations and is therefore uncertain and potentially expensive. We cannot provide assurance that patents will be granted with respect to our pending patent applications, that the scope of any patents we might obtain will be sufficiently broad to offer meaningful protection, or that we will develop additional proprietary products that are patentable. In fact, any patents which might issue from our patent applications pending with the United States Patent and Trademark Office could be successfully challenged, invalidated or circumvented. This could result in our pending patent rights failing to create an effective competitive barrier. Losing a significant patent or failing to get a patent issued from a pending patent application we consider significant could have a material adverse effect on our business. We may not be able to protect our intellectual property rights throughout the world, which could negatively impact our business. Filing, prosecuting and defending patents covering our current and future product candidates and technology platforms in all countries throughout the world would be prohibitively expensive. Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and, further, may export otherwise infringing products to territories where we may obtain patent protection but where patent enforcement is not as strong as that in the United States. These products may compete with our products in jurisdictions where we do not have any issued or licensed patents, and any future patent claims or other intellectual property rights may not be effective or sufficient to prevent them from so competing. Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents, trade secrets and other intellectual property protection which could make it difficult for us to stop the infringement of our patents or marketing of competing products in violation of our intellectual property and proprietary rights, generally. Proceedings to enforce our intellectual property and proprietary rights in foreign jurisdictions could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents at risk of being invalidated or interpreted narrowly, could put our patent applications at risk of not issuing, and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate, and the damages or other remedies awarded, if any, may not be commercially meaningful. Accordingly, our efforts to enforce our intellectual property and proprietary rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license. Many countries have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. In addition, many countries limit the enforceability of patents against government agencies or government contractors. In these countries, the patent owner may have limited remedies, which could materially diminish the value of such patent. If we or any of our licensors are forced to grant a license to third parties with respect to any patents relevant to our business, our competitive position may be impaired, and our business, financial condition, results of operations and prospects may be adversely affected. Our patents might not protect our technology from competitors, in which case we may not have any exclusionary advantage over competitors in selling any products that we may develop. Our commercial success will depend in part on our ability to obtain additional patents and protect our existing patent position, as well as our ability to maintain adequate intellectual property protection for our technologies, product candidates, and any future products in the U.S. and other countries. If we do not adequately protect our technology, product candidates and future products, competitors may be able to use or practice them and erode or negate any competitive advantage we may have, which could harm our business and ability to achieve profitability. The laws of some foreign countries do not protect our proprietary rights to the same extent or in the same manner as U.S. laws, and we may encounter significant problems in protecting and defending our proprietary rights in these countries. We will be able to protect our proprietary rights from unauthorized use by third parties only to the extent that our proprietary technologies, product candidates and any future products are covered by valid and enforceable patents or are effectively maintained as trade secrets. 20 Certain aspects of our technologies are protected by patents, patent applications, and trade secrets. In addition, we have a number of new patent applications pending. There is no assurance that the applications still pending or which may be filed in the future will result in the issuance of any patents. Furthermore, there is no assurance as to the breadth and degree of protection any issued patents might afford us. Disputes may arise between us and others as to the scope and validity of these or other patents. Any defense of the patents could prove costly and time-consuming, and there can be no assurance that we will be in a position, or deem it advisable, to carry on such a defense. A suit for patent infringement could result in increasing costs as well as delaying or halting development. Other private and public entities, including universities, may have filed applications for, may have been issued, or may obtain additional patents and other proprietary rights to technology potentially useful or necessary to us. We are not currently aware of any such patents, but the scope and validity of such patents, if any, and the cost and availability of such rights are impossible to predict. Any trademarks we may obtain may be infringed or successfully challenged, resulting in harm to our business. We expect to rely on trademarks as one means to distinguish our products from our competitors’ products. Once we select trademarks and apply to register them, our trademark applications may not be approved. Third parties may oppose our trademark applications or otherwise challenge our use of the trademarks. In the event that our trademarks are successfully challenged, we could be forced to rebrand our products, which could result in a loss of brand recognition and could require us to devote resources to advertising and marketing new brands. Our competitors may infringe on our trademarks, and we may not have adequate resources to enforce our trademarks. Much of our intellectual property is protected as trade secrets or confidential know-how. We consider proprietary trade secrets to be important to our business. This type of information must be protected diligently by us to protect its disclosure to competitors, since legal protections after disclosure may be minimal or non-existent. Accordingly, much of the value of this intellectual property is dependent upon our ability to keep our trade secrets. To protect this type of information against disclosure or appropriation by competitors, our policy is to require our employees, consultants, contractors and advisors to enter into confidentiality agreements with us. However, current or former employees, consultants, contractors and advisers may unintentionally or willfully disclose our confidential information to competitors, and confidentiality agreements may not provide an adequate remedy in the event of unauthorized disclosure of confidential information. Enforcing a claim that a third party illegally obtained, and is using, trade secrets is expensive, time-consuming and unpredictable. The enforceability of confidentiality agreements may vary from jurisdiction to jurisdiction. Failure to obtain or maintain trade secret protection could adversely affect our competitive position. Moreover, our competitors may independently develop substantially equivalent proprietary information and may even apply for patent protection in respect of the same. If successful in obtaining such patent protection, our competitors could limit our use of such trade secrets. We may be subject to claims challenging the inventorship or ownership of our patents and other intellectual property. We may also be subject to claims that former employees, suppliers, collaborators or other third parties have an ownership interest in our patents or other intellectual property. We may be subject to ownership disputes in the future arising, for example, from conflicting obligations of suppliers, consultants or others who are involved in developing our products. Litigation may be necessary to defend against these and other claims challenging inventorship or ownership. If we fail in defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights, such as exclusive ownership of, or right to use, valuable intellectual property. Such an outcome could have a material adverse effect on our business. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management and employees. 21 Intellectual property rights do not necessarily address all potential threats to our business. The degree of future protection afforded by our intellectual property rights is uncertain because intellectual property rights have limitations and may not adequately protect our business. The following examples are illustrative: ● others may be able to develop technologies that are similar to our technology platforms but that are not covered by the claims of any patents, should they issue, that we own or license; ● we or our licensors might not have been the first to make the inventions covered by the issued patents or pending patent applications that we own or license; ● we or our licensors might not have been the first to file patent applications covering certain aspects of our inventions; ● others may independently develop similar or alternative technologies or duplicate any of our technologies without infringing our intellectual property rights; ● it is possible that our pending patent applications will not lead to issued patents; ● issued patents that we own or license may not provide us with any competitive advantages, or may be held invalid or unenforceable as a result of legal challenges; ● our competitors might conduct research and development activities in the United States and other countries that provide a safe harbor from patent infringement claims for certain research and development activities, as well as in countries where we do not have patent rights, and then use the information learned from such activities to develop competitive products for sale in our major commercial markets; ● we may not develop additional proprietary technologies that are patentable; and ● the patents of others may have an adverse effect on our business. We may need to defend ourselves against patent or trademark infringement claims, which may be time-consuming and cause us to incur substantial costs. Companies, organizations or individuals, including our competitors, may own or obtain patents, trademarks or other proprietary rights that would prevent or limit our ability to make, use, develop or sell our products or components, which could make it more difficult for us to operate our business. The automotive aftermarket has been characterized by significant litigation and other proceedings regarding patents, patent applications and other intellectual property rights. The situations in which we may become parties to such litigation or proceedings may include: ● litigation or other proceedings we may initiate against third parties to enforce our patent rights or other intellectual property rights; ● litigation or other proceedings we or our licensee(s) may initiate against third parties seeking to invalidate the patents held by such third parties or to obtain a judgment that our products do not infringe such third parties’ patents; and ● litigation or other proceedings third parties may initiate against us to seek to enforce their patents and/or invalidate our patents. If third parties initiate litigation claiming that our products infringe their patent or other intellectual property rights, we will need to defend against such proceedings. The costs of resolving any patent litigation or other intellectual property proceeding, even if resolved in our favor, could be substantial. Many of our potential competitors will be able to sustain the cost of such litigation and proceedings more effectively than we can because of their substantially greater resources. In some instances, competitors may proceed with litigation or other proceedings pertaining to infringement of their intellectual property as a means to hinder or devaluate the target defendant company, with no intention of the matter being resolved in their favor. Uncertainties resulting from the initiation and continuation of patent litigation or other intellectual property proceedings could have a material adverse effect on our ability to compete in the marketplace. Patent litigation and other intellectual property proceedings may also consume significant management time and costs. Substantial additional costs may be evident in the event that litigation or other proceedings were initiated against us because we would have to seek legal defense or counsel in the province (Canada) or state (U.S.) where the litigation or legal proceedings were filed. Failure to adequately protect our intellectual property rights could result in our competitors offering similar products, potentially resulting in the loss of some of our competitive advantage, and a decrease in our revenue which would adversely affect our business, prospects, financial condition and operating results. 22 Confidentiality agreements with employees and others may not adequately prevent the disclosure of trade secrets and other proprietary information. In order to protect our proprietary technology and processes, we also rely in part on confidentiality agreements with our employees, consultants, outsourced manufacturers and other advisors. These agreements may not effectively prevent the disclosure of confidential information and may not provide an adequate remedy in the event of unauthorized disclosure of confidential information. In addition, others may independently discover trade secrets and proprietary information. Costly and time-consuming litigation could be necessary to enforce and determine the scope of our proprietary rights, and failure to obtain or maintain trade secret protection could adversely affect our competitive business position. There are risks associated with outsourced production that may result in a decrease in our profit. The possibility of delivery delays, product defects and other production-side risks stemming from our use of outsourced manufacturers and suppliers cannot be eliminated. In particular, inadequate production capacity among outsourced manufacturers could result in us being unable to supply enough product amid periods of high product demand, the opportunity costs of which could be substantial. This risk is partially offset by the fact that we domestically manufacture our line of hard tonneau covers, which is responsible for a larger portion of our sales than our outsource manufactured soft tonneau covers. There are risks associated with domestic production that may result in slower or more expensive production. Prior to August of 2023, we had no experience in the domestic manufacturing of tonneau covers. Domestic production entails far more detailed sourcing of raw materials as well as hiring and training of personnel. Domestic production increases our susceptibility to domestic low-wage labor shortages and subjects us to higher thresholds of compliance with local labor and business laws. We may not be successful in our potential business combinations. We may, in the future, pursue acquisitions of other complementary businesses and technology licensing arrangements. We have been approached by competitors to license one or more of our tonneau cover products. We may also pursue strategic alliances and joint ventures that leverage another company’s core products and industry experience to expand our product offerings and geographic presence. We have limited experience with respect to acquiring other companies and limited experience with respect to forming collaborations, strategic alliances and joint ventures. If we were to make any acquisitions, we may not be able to integrate these acquisitions successfully into our existing business and could assume unknown or contingent liabilities. Integrating an acquired company also may require management resources that otherwise would be available for the ongoing development of our existing business. We have competition for our market share which could harm our sales. We participate in the automotive aftermarket equipment industry which is highly competitive for a relatively limited customer base. Companies that compete in this market include Real Truck (formerly Truck Hero), Truck Accessories Group, and Agri-Cover, Inc., among others. Many of our current competitors are significantly better funded and have longer operating histories than we do. In addition, some of our competitors sell their products at prices lower than ours, and we compete primarily on the basis of product quality, features, value, service, and customer relationships. Our competitive success also depends on our ability to maintain a strong brand and the belief that customers will need our products and services to meet their growth requirements. Alternatively, in the case of generic competition, competitors’ products may be of equal or better quality and sold at substantially lower prices than our products. At times, competitors may also release a generic or re-branded version of a current and successful product at a substantially reduced price in efforts to increase revenues or market share. As a result, if we fail to maintain our competitive position, this could have a material adverse effect on our business, cash flow, results of operations, financial position and prospects. 23 We may not have sufficient product liability insurance to cover potential damages. The existence of any defects, errors or failures in our products or the misuse of our products could also lead to product liability claims or lawsuits against us. While we had insurance coverage of $2,000,000 for the year ended December 31, 2024, we have no assurance that this insurance will be adequate to protect us from all material judgments and expenses related to potential future claims or that these levels of insurance will be available at economical prices, if at all. To that extent, product liability insurance is conditional and up for further investigation. A successful product liability claim could result in substantial costs for us. Even if we are fully insured as it relates to a claim, a claim could nevertheless diminish our brand and divert management’s attention and resources, which could have a negative impact on our business, financial condition and results of operations. We may produce products of inferior quality which would cause us to lose customers. Although we make an effort to ensure the high quality of our products, they could from time to time contain defects, anomalies or malfunctions that are undetectable at the time of shipment. These defects, anomalies or malfunctions could be discovered after our products are shipped to customers, resulting in the return or exchange of our products, customers’ claims for compensatory damages or discontinuation of the use of our products, which could negatively impact our operating results. We do not presently have product recall (or similar function) insurance that protects a company against broad-scale product manufacturing defects, engineering defects and the costs related to a broad product recall such as shipping, replacement or repairs. Even if in place, there is no guarantee that the full costs of any reimbursements or claims, lawsuits or litigation would be covered by such insurance. Geopolitical conditions, including direct or indirect acts of war or terrorism, could have an adverse effect on our operations and financial results. Our operations could be disrupted by geopolitical conditions, political and social instability, acts of war, terrorist activity or other similar events. It is not possible to predict the broader consequences of current global conflicts, although such consequences can include rising geopolitical tensions, rising regional instability, geopolitical shifts, cyberattacks or the disruption of energy exports for the parties involved, neighboring parties, or supporting parties of these conflicts or their resulting sanctions. Such consequences could materially adversely affect global trade, currency exchange rates, regional economies and the global economy. These situations remain uncertain, and while it is difficult to predict the impact of any of the foregoing, these conflicts and actions taken in response to these conflicts could increase our costs, disrupt our supply chain, reduce our sales and earnings, impair our ability to raise additional capital when needed on acceptable terms, if at all, or otherwise adversely affect our business, financial condition, and results of operations. 24 Risks Associated with Outsourced Manufacturing and Foreign Sourcing Evolving U.S. trade regulations and policies with China may in the future have a material and adverse effect on our business, financial condition and results of operations. Our soft tonneau covers and some raw materials are sourced from China. Any restrictions or tariffs imposed on products that we or our suppliers import for sale or production in the U.S. would adversely and directly impact our cost of sales. In addition, changes in U.S. trade regulations and policies could have an adverse impact on trade relations between the U.S. and certain foreign countries, which could materially and adversely affect our relationships with our international suppliers and reduce the supply of goods available to us. Further, we cannot predict the extent to which the U.S. will adopt changes to existing trade regulations and policies, which creates uncertainties in planning our sourcing strategies and forecasting our margins. If additional tariffs are imposed on our products , or other retaliatory trade measures are taken, our costs could increase, and we may be required to raise our prices, which could materially and adversely affect our results. Changes in U.S. trade policy, including the imposition of tariffs and the resulting consequences, could adversely affect our results of operations. Many of our raw materials are purchased from suppliers in a variety of non-U.S. countries. The U.S. government’s trade policy with countries where we source our products may change based on a number of factors, including, but not limited to, political and economic factors. For instance, the U.S. government has imposed tariffs on certain foreign goods, including steel and certain commercial vehicle parts, which have resulted in increased costs for goods imported into the U.S. In response to these tariffs, a number of U.S. trading partners have imposed retaliatory tariffs on a wide range of U.S. products. If we are unable to pass price increases on to our customer base or otherwise mitigate the costs, or if demand for our products decreases due to the higher cost, our results of operations could be materially adversely affected. In addition, further tariffs have been proposed by the United States and its trading partners and additional trade restrictions could be implemented. There are risks associated with outsourced production in China, and their laws which may have a material adverse effect on our financial stability. We purchase all our soft tonneau cover finished goods from two suppliers in China. Changes in Chinese laws and regulations, or their interpretation, or the imposition of confiscatory taxation or restrictions are matters over which we have no control. While the Chinese government has been pursuing economic reform policies that encourage private economic activity and greater economic decentralization, there is no assurance that the Chinese government will continue to pursue these policies, or that it will not significantly alter these policies from time to time without notice. 25 For example, the Chinese government has enacted some laws and regulations dealing with matters such as corporate organization and governance, foreign investment, commerce, taxation and trade. However, their experience in implementing, interpreting and enforcing these laws and regulations is limited and, in turn, our ability to enforce commercial claims or to resolve commercial disputes is unpredictable. If our business ventures with Chinese manufacturers and suppliers are unsuccessful, or other adverse circumstances arise from these transactions, we face the risk that the parties to these ventures may seek ways to terminate the transactions. The resolution of these matters may be subject to the exercise of considerable discretion by agencies of the Chinese government, and forces unrelated to the legal merits of a particular matter or dispute may influence their determination. Any rights we may have to specific performance or to seek an injunction under Chinese law are severely limited, and, without a means of recourse by virtue of the Chinese legal system, we may be unable to prevent these situations from occurring. The occurrence of any such events could have a material adverse effect on our business, financial condition and results of operations in such guises as currency conversion, imports and sources of supply, devaluations of currency or the nationalization or other expropriation of private enterprises. In that context, we may have to evaluate the feasibility of acquiring alternative or fallback manufacturing capabilities to support the production of our existing and future soft tonneau cover products. Such a development could adversely affect our cost structure inasmuch as we would be required to support sales at an acceptable cost and might have relatively limited time to adapt. We have mitigated such risks by stockpiling soft tonneau covers for domestic sales, but we will still rely on outsource manufacturing for additional soft cover production, as we have not manufactured our own soft tonneau covers in the past and are not planning to do so in the short term. We engage in cross-border sales transactions which present tax risks among other obstacles. Cross-border sales transactions carry a risk of changes in import tax and/or duties related to the import and export of our product, which can result in pricing changes, which will affect revenues and earnings. Cross-border sales transactions carry other risks including, but not limited to, changing regulations, wait times, customs inspection and lost or damaged product. We are subject to foreign currency risk which may adversely affect profitability. We are subject to foreign exchange risk. We manufacture soft tonneau covers in China , source raw materials for hard tonneau covers from the U.S., Canada and China, work with U.S. and Canada-based service providers, and employ individuals in the U.S. and Canada. Meanwhile, we report results of operations in U.S. Dollars (USD). Large fluctuations in the exchange between foreign currencies and USD may adversely affect profitability. Changes in U.S. government policies or regulations, including potential rollbacks of electric vehicle initiatives, could adversely affect our business, strategy, and growth prospects. Our business strategy may rely, in part, on regulatory support for electric vehicle adoption, including incentives, mandates, infrastructure investment and emissions regulations. However, President Donald Trump has signed an executive order titled Unleashing American Energy , indicating that his administration intends to reverse electric vehicle mandates implemented by the prior administration. In addition, President Trump has paused billions of dollars in federal funding allocated toward EV charging infrastructure. The actions reflect a shift in federal energy and transportation policy, and the future of the U.S. regulatory environment surrounding electric vehicles remains uncertain. Any reduction or elimination of governmental support for EV adoption or related infrastructure development could negatively impact market demand, hinder our growth initiatives and materially affect our financial condition and results of operations. Risks Related to the Ownership of Our Securities We have a large number of authorized but unissued shares of our common stock which will dilute existing ownership positions when issued. At December 31, 2024, our authorized capital stock consists of 29,900,000 shares of common stock, of which approximately 25,883,795 remain available for issuance, including shares of common stock issuable upon the exercise of outstanding warrants. Our management will continue to have broad discretion to issue shares of our common stock in a range of transactions, including capital-raising transactions, mergers, acquisitions and other transactions, without obtaining stockholder approval, unless stockholder approval is required under law or the rules of Nasdaq or any other trading market on which our common stock may be listed. If our management determines it be appropriate to issue shares of our common stock from the large pool of authorized but unissued shares for any purpose in the future and is not required to obtain stockholder approval, your ownership position would be diluted without your further ability to vote on that transaction. 26 Our common stock or warrants may be affected by limited trading volume and price fluctuations, which could adversely impact the value of our common stock. Our common stock has experienced, and is likely to experience in the future, significant price and volume fluctuations, which could adversely affect the market prices of our common stock without regard to our operating performance. In addition, we believe that factors such as quarterly fluctuations in our financial results and changes in the overall economy or the condition of the financial markets could cause the market prices of our common stock and warrants to fluctuate substantially. These fluctuations may also cause short sellers to periodically enter the market in the belief that we will have poor results in the future. We cannot predict the actions of market participants and, therefore, can offer no assurances that the market for our common stock and warrants will be stable or appreciate over time. We may need, but be unable, to obtain additional funding on satisfactory terms, which could dilute our stockholders or impose burdensome financial restrictions on our business. We have relied upon cash from financing activities, and, in the future, we hope to rely on revenues generated from operations to fund the cash requirements of our activities. However, there can be no assurance that we will be able to generate any significant cash from our operating activities in the future. Future financing may not be available on a timely basis, in sufficient amounts or on terms acceptable to us, if at all. Any debt financing or other financing of securities senior to the common stock will likely include financial and other covenants that will restrict our financing and/or operational flexibility. Any failure to comply with these covenants would have a material adverse effect on our business, prospects, financial condition and results of operations because we could lose our existing sources of funding, and our ability to secure new sources of funding could be impaired. Our stock ownership structure has the effect of concentrating voting control with our Chief Executive Officer and Chairman, Steven Rossi, which will limit the ability of other shareholders to influence the outcome of important decisions. Steven Rossi currently owns 100% of our outstanding Series A Preferred Stock which entitles him to 51% of the voting power of our outstanding voting equity. Subject to any fiduciary duties owed to our other stockholders under Nevada law, Mr. Rossi is able to exercise significant influence over matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions, and will have some control over our management and policies. Mr. Rossi may have interests that are different from yours. For example, Mr. Rossi may support proposals and actions with which you may disagree. The concentration of ownership could delay or prevent a change in control of our Company or otherwise discourage a potential acquirer from attempting to obtain control of our Company, which in turn could reduce the price of our stock. In addition, Mr. Rossi could use his voting influence to maintain our existing management and directors in office, delay or prevent changes in control of our Company, or support or reject other management and Board proposals that are subject to stockholder approval, such as amendments to our employee stock plans and approvals of significant financing transactions. 27 If research analysts do not publish research about our business, or if they issue unfavorable commentary or downgrade our common stock, our stock price and trading volume could decline. The trading market for our securities may depend in part on the research and reports that research analysts publish about us and our business. If we do not maintain adequate research coverage, or if any of the analysts who cover us downgrade our stock or publish inaccurate or unfavorable research about our business, the price of our common stock could decline. If one or more of our research analysts ceases to cover our business or fails to publish reports on us regularly, demand for our securities could decrease, which could cause the price of our common stock or trading volume to decline. Anti-takeover provisions in our charter documents and Nevada law could discourage, delay or prevent a change of control of our Company and may affect the trading price of our common stock. We are a Nevada corporation, and the anti-takeover provisions of the Nevada Control Shares Acquisition Act may discourage, delay or prevent a change of control by limiting the voting rights of control shares acquired in a control share acquisition. In addition, our amended and restated articles of incorporation, as amended (“Articles of Incorporation”), and amended and restated bylaws (“Bylaws”) may discourage, delay or prevent a change in our management or control over us that stockholders may consider favorable. Among other things, our Articles of Incorporation and Bylaws: ● authorize the issuance of “blank check” preferred stock that could be issued by our Board in response to a takeover attempt; ● provide that vacancies on our Board, including newly created directorships, may be filled only by a majority vote of directors then in office, except a vacancy occurring by reason of the removal of a director without cause shall be filled by vote of the stockholders; and ● limit who may call special meetings of stockholders. These provisions could have the effect of delaying or preventing a change of control, whether or not it is desired by, or beneficial to, our stockholders. We do not intend to pay dividends in the foreseeable future. We currently do not expect to declare any dividends on our common stock in the foreseeable future. Any decision to declare or pay dividends in the future will be at the discretion of our board of directors. Accordingly, your only opportunity to achieve a return on your investment in our common stock may be if the market price of our common stock appreciates and you sell your shares at a profit. The market price for our common stock may never exceed, and may fall below, the price that you pay for such common stock. See Part II, Item 5 “ Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities—Dividend Policy .” Risks Associated with Holding Cryptocurrency Reserves Our bitcoin acquisition strategy may expose us to various risks associated with bitcoin. Bitcoin is a highly volatile asset. Bitcoin is a highly volatile asset that has traded below $38,000 per bitcoin and above $99,000 per bitcoin on Coinbase in the 12 months preceding the date of this prospectus supplement. The trading price of bitcoin was significantly lower during prior periods, and such decline may occur again in the future. 28 Changes in our ownership of bitcoin could have accounting, regulatory and other impacts. While we currently intend to own bitcoin directly, we may investigate other potential approaches to owning bitcoin, including indirect ownership (for example, through ownership interests in a fund that owns bitcoin). If we were to own all or a portion of our bitcoin in a different manner, the accounting treatment for our bitcoin, our ability to use our bitcoin as collateral for additional borrowings, and the regulatory requirements to which we are subject, may correspondingly change. We may be subject to regulatory developments related to crypto assets and crypto asset markets, which could adversely affect our business, financial condition, and results of operations. As bitcoin, XRP and other digital assets are relatively novel and the application of state and federal securities laws and other laws and regulations to digital assets is unclear in certain respects, and it is possible that regulators in the United States or foreign countries may interpret or apply existing laws and regulations in a manner that adversely affects the price of bitcoin. The U.S. federal government, states, regulatory agencies, and foreign countries may also enact new laws and regulations, or pursue regulatory, legislative, enforcement or judicial actions, that could materially impact the price of bitcoin or the ability of individuals or institutions such as us to own or transfer bitcoin. For examples, see “— Bitcoin and other digital assets are novel assets, and are subject to significant legal, commercial, regulatory and technical uncertainty ” above. The acceptance of blockchain and digital assets as payment on our platform introduces significant risks, including, without limitation, regulatory uncertainty, market volatility, and operational challenges. We accept digital assets as a form of payment from our customers. Digital assets are subject to evolving legal and regulatory frameworks in the U.S. and internationally. Any change in laws regulating or enforcement actions pertaining to digital assets may restrict the use of these assets, including bitcoin and XRP, expose us to penalties and increase compliance costs, among other things. Our ability to convert digital asset payments into fiat currency may be impaired during periods of market instability, while funds stored in digital assets lack protections offered by institutions such as the Federal Deposit Insurance Corporation or the Securities Investor Protection Corporation. The integration of blockchain payment systems may expose us to risks of cyberattacks, fraud, or technical failures, potentially resulting in financial losses or reputational damage.