Item 1. Business
ITEM 1. BUSINESS
Our Company
Interlink Electronics, Inc. (“we”, “us”, “our”, “Interlink” or the “Company”) designs, develops, manufactures and sells a range of force-sensing technologies that incorporate our proprietary materials technology, firmware and software into a portfolio of standard products and custom solutions. These include sensor components, subassemblies, modules and products that support effective, efficient cursor control and novel three-dimensional user inputs. Our Human Machine Interface (“HMI”) technology platforms are deployed in a wide range of markets including consumer electronics, automotive, industrial, and medical. The application of our HMI technology platforms includes vehicle entry, vehicle multi-media control interface, rugged touch controls, presence detection, collision detection, speed and torque controls, pressure mapping, biological monitoring and others.
Interlink has been a leader in the printed electronics industry for over 35 years with the commercialization of our patented Force-Sensing Resistor (“FSR®”) technology that has enabled rugged and reliable HMI solutions. Our solutions have focused on handheld user input, menu navigation, cursor control, and other intuitive interface technologies for the world’s top electronics manufacturers.
We invented FSR® technology and pioneered commercialization of printed electronics manufacturing, paving the way for industry-wide adoption of force sensing technology. Our extensive knowledge and experience with this technology, along with the firmware we incorporate in our HMI solutions, differentiates us from other providers of HMI solutions. We, along with our customers, incorporate our FSR® and force sensing sensors and modules into end user products. Our sensors and modules are used in electronics devices and systems where user input must be converted into useful output data. Our force sensing technology solution platforms enabled industry-first implementations in gaming, smartphone, rugged notebook, automotive cockpit and automotive entry applications. Consumer and end-user demand for enhanced user experience is driving the need for innovative multi-modal HMI technologies and applications. Force sensing input provides a critical novel modality that drives a paradigm shift in HMI.
Market requirements for innovative solutions that enable smaller, thinner devices, lower power consumption, highly refined designs, better navigation and more intuitive usability in all environments, are also driving increased demand for our products. Industry is moving towards the use of multi-modal HMI in the home, industrial, medical and automotive spaces. Interlink delivers cutting edge, high performance HMI solutions for customers who wish to replace outdated switches and knobs in these environments.
4
Table of Contents
Significant market opportunities are rapidly emerging for us to improve upon the functionality of standard capacitive sensors which are widely available and competitively priced. Inadvertent activation, where users unintentionally activate a control, is a common problem with capacitive technology. In contrast, force sensing solutions require a deliberate application of force to operate. We have had recent success in using our force sensing solutions in combination with capacitive technologies to minimize the latter’s performance issues, enabling force sensing solutions to complement competitive technologies and provide hybrid solutions and open up new opportunities for growth. We continue to simultaneously expand our standard product portfolio and develop new technology platforms to grow existing markets and capture emerging markets. This portfolio expansion will incorporate other complimentary sensing technologies. This broader portfolio of technologies will allow us to use our expertise in integrating multiple sensing technologies for applications in the rapidly growing Internet-of-Things (“IoT”).
Interlink serves our world-wide customer base from our corporate headquarters in Irvine, California (Orange County area) and from our facility in Camarillo, California (Ventura County). We have established a Global Product Development and Materials Science Center in our Camarillo footprint. This facility has a state-of-the-art printed electronics development laboratory as well as materials science lab. Our engineering team is based in this center where we work with our U.S. and global customers on developing, engineering, prototyping and implementing our advanced HMI and sensing solutions. We also maintain a small embedded software and IoT application development center in Singapore, and we expect to launch an engineering, research and development center in the United Kingdom in 2022. We manufacture all our products in our printed electronics manufacturing facility in Shenzhen, China, which has been in operation since 2006. In addition, we maintain a global distribution and logistics center in Hong Kong, a technical sales office in Japan, and several manufacturer representatives and distributors in strategic locations in our key markets, all of which allows us to support our global customer base. We sell our products in a wide range of markets, including consumer electronics, automotive, industrial and medical. Our customers are some of the world’s largest companies and most recognizable brands.
We were incorporated in California in 1985. In 1996, we re-incorporated into a Delaware corporation and, in 2012, we again changed our domicile from Delaware to Nevada by completing a merger with a newly formed Nevada corporation named Interlink Electronics, Inc.
Our principal executive office is located at 1 Jenner, Suite 200, Irvine, California 92618 and our telephone number is (805) 484-8855. Our website address is www.interlinkelectronics.com. Interlink makes available its annual financial statements, quarterly financial statements, and other significant reports and amendments to such reports, free of charge, on its website as soon as reasonably practicable after such reports are prepared.
Our Industry
HMI technologies have been available since the early 1970’s but were used almost exclusively in industrial products during the first 20 years of their existence. The introduction of touchpad mouse devices for laptop computers in the early 1990’s represented the first significant transition of HMI technologies into the consumer electronics market. Personal devices utilizing touch sensitive technology became ubiquitous in our daily human-machine interactions with the introduction in 2007 of smart phone technology incorporating capacitive touchscreens. As the smart phone became an integral part of consumers’ daily lives throughout the world, it influenced consumers’ expectations of how we should interact with all types of devices. Whether those devices are personal electronics, industrial and medical equipment, or automobiles, users of this equipment expect sleek, highly-functioning design including touch-sensing technology. Consumers no longer want to push buttons or flip switches; rather, they expect smooth touch pads and gesture-driven input. Engineers are responding to this demand by incorporating touch sensitive technology into a wide range of products, and any device that can utilize force and position sensing inputs to control or enhance its functionality is a candidate for use of the technology.
The products and solutions that we design, develop and manufacture for HMI and IoT applications are primarily printed electronic products. Printed electronics is an additive manufacturing technology used to create electrical devices on various substrates. For over 35 years we have honed and developed the processes necessary to manufacture high quality printed electronic products for HMI applications. Printed electronic technologies are emerging as potential low-cost replacements to silicon-based electronics in many specific application areas. As reported by industry analyst group IDTechEx, printed force sensors alone already account for approximately 30% of printed sensor market share, and by 2025, the projected market for all printed sensor components is expected to surpass $8 billion. According to the IDTechEx study Printed, Organic and Flexible Electronics 2020-2030: Forecasts, Technologies, Markets , the total market for printed, flexible, and organic electronics will grow from $41.2 billion in 2020 to $74 billion in 2030. The majority of that is OLEDs (organic but not printed) and conductive ink used for a wide range of applications, however, stretchable
5
Table of Contents
electronics, logic and memory, thin film sensors have huge growth potential. As a member of OE-A, the Organic and Printed Electronics Association, we actively influence and contribute to the global landscape of printed electronics.
Internet-Of-Things -enabled intelligent sensing applications are gaining rapid commercial attention. Our sensing technology platforms are capable of providing the critical backbone for data sensing, measurement and analytics used in emerging wireless connectivity implementations in both short-range low-power wireless communications such as Bluetooth and long-range ultra low-power wireless communications such as LoRaWAN®.
Our Strategy
Our primary objective is to be the global leader and provider of multi-sensing based HMI technology solutions for the automotive, consumer electronics, medical and industrial automation markets. We also intend to utilize our role as a disruptive technology provider to bring our HMI solutions to new markets. To achieve our strategy, we intend to:
● Expand our presence in the markets we occupy . We will continue to exploit new opportunities in the markets we occupy by leveraging our demonstrable success in the solutions we are providing today.
● Expand into new and emerging markets . We are bringing our highly-successful product lines and technologies to markets previously unaware of the opportunities provided by force-sensing and related technology solutions.
● Expand our presence with our current customers . We work with some of the world’s largest companies and most recognizable brands and are providing second and third generation turn-key solutions to meet their technology needs. We will continue to develop these existing relationships by working closely with our customers to understand how we can support their product and technology strategies and continue to be a trusted advisor.
● Pursue a multi-technology roadmap . We utilize multiple technologies in our HMI solutions, and we will continue to invest in research and development (“R&D”) and expand our offerings to include resistive, piezo, capacitive and other emerging touch and sensing technologies. These will enable us to integrate our solutions and create the smart surfaces of the future. These may include haptic technology to enhance the user experience of these next generation technologies.
● Pursue inorganic growth opportunities. In connection with our growth strategy, we will continue to evaluate potential acquisitions that provide us with relevant new technologies to add to our “technology toolbox.”
Our product development teams are skilled in concept definition, rapid prototyping, hardware and firmware development and integration support. Interlink benefits from its own world-class manufacturing facility in Shenzhen, China, allowing us to react quickly to customer needs, while ensuring the highest quality standards. We also maintain a technical sales force that can address new and existing customer opportunities worldwide. Our teams engage early in the development phase with our customers and we provide critical design inputs to ensure the solutions developed address the customer’s needs and meet their design goals and intent. We strive to solve our customers’ problems.
Our Technology Platforms and Products
Interlink was founded on the invention and commercialization of FSR® technology, the industry’s first force sensing solution using printed electronics manufacturing. As we transition from an FSR® sensor supplier to an HMI solutions provider, we pursue and embrace leading edge force sensing and related technology platforms. Our embedded software engineering team located in Singapore, along with our VP of Engineering & Advanced Materials and our expanding materials science and engineering team in Camarillo, California, are focused on strategic technology roadmaps, development of scalable technology platform architectures and pursuit of synergistic technology partnerships. We also expect to launch an engineering, research and development center in the United Kingdom in 2022. In an ever changing and competitive landscape, we are committed to staying ahead of the technology curve.
The two primary types of user-input technologies common in today’s devices are capacitive and resistive. Capacitive sensors are used in the touch screens found in most smart phones and similar devices used globally by millions of consumers. The most significant drawback to the capacitive technology is its inability to measure force, although there has been some progress recently in enhancing the technology with pseudo force sensing. Capacitive sensors have become a high-volume, low-margin commodity product.
6
Table of Contents
Our patented FSR® sensor technology consists of a bottom layer of conductor electrodes, a proprietary resistive material top layer and a separator between the two layers. An additional top layer that contains graphics and protects the sensor can also be added. FSR® sensors can be as thin as eight thousandths of an inch, making them particularly well suited for use where the design space is restricted, as in portable or wearable electronics. Our force sensing technology enables the sensor to be used for continuously variable control functions. For example, in a pointing device, increased pressure can be used to produce faster cursor movement. Unlike capacitive devices, an FSR® sensor’s performance is not impeded by the presence of moisture, dirt or dust, making the sensor suitable for use outdoors and in moist and other “hostile” environments. Our FSR® sensors have no moving parts, can be packaged in a sealed environment, and are low power and are less susceptible to false readings or unintended touches than capacitive sensors. We have developed sophisticated algorithms and firmware that allows our FSR® technology to become a complete solution delivering effective HMI functionality to our customers.
Custom Solutions
Interlink offers a comprehensive portfolio of standard solutions, from simple force sensors to multi-finger capable rugged trackpads. The largest part of our business, however, is the development and manufacture of custom solutions for our major customers. We offer full integration capability spanning initial concept to large volume manufacturing. Custom solutions can be a single or multi-technology platform to meet customer requirements and include both input and output technologies. We also offer full embedded firmware development and integration support. In many instances we work very closely with our OEM partners from the concept phase to ensure that our solutions are successfully integrated.
Standard Solutions
Our portfolio of standard solutions includes:
● Our standard single zone FSR® sensors are the most versatile force sensing technology on the market today. These innovative sensors provide an inverse change in resistance in response to an increase or decrease in applied force. These provide engineers and designers with a durable, reliable, easy to measure, easy to integrate, thin-form factor and low-cost solution for HMI touch solutions and analog data capture for machines. FSR® sensors are available in a range of sizes, shapes and lengths and with several connection options. We also now offer them in different force sensing ranges, with the introduction of our FSR X® and FSR UX® range of standard sensors. These new sensors were developed in our material science development lab.
● Force sensing linear potentiometers (“FSLP”) are sensors which can be used for menu navigation and control. Our use of force allows for high rate scrolling and a more intuitive user experience. The FSLP is an easy to integrate, high resolution, ultra-low power-based solution that brings intuitive user controls to reduced form factor hand-held consumer electronic devices. These sensors are available in multiple lengths. We also offer a ring sensor for full 360-degree position sensing. These sensors are designed to be integrated into a device’s host processor without the need for a dedicated microprocessor.
● Our integrated mouse modules and pointing solutions can add touchpad or 360-degree pointing control to virtually any electronic device. Ranging from simple mouse button integration to NEMA rated (National Electrical Manufacturer Association) industrial pointing devices, these solutions are ideal for applications away from the desktop. The modules use FSR® technology and measurement firmware in a four-zone sensor or 4-wire resistive touchpad configuration along with a micro-controller to provide pressure sensitive cursor direction and speed control in a durable and easy to integrate form factor.
● Piezoelectric sensors are an upcoming addition to our standard sensor portfolio. After highly successful custom implementation in automotive applications, we have developed a set of standard piezo sensors and development kit which will be launched in 2022. These sensors are polymeric piezoelectric sensors with a wide range of applications and uses such as; dynamic strain gauges, impact/force sensors, vital signs sensors, motion sensors, vibration sensors, accelerometers as well as solid state rugged switches. Many of these diverse applications modes require extensive domain knowledge for successful integration. Our expertise in this area will allow us to be a trusted advisor to help our customers develop specialized solutions and solve their integration challenges.
7
Table of Contents
Intellectual Property
We believe that intellectual property protection is crucial to our business. We rely on a combination of patents, copyrights, trade secrets, trademarks, nondisclosure agreements with employees and third parties, licensing and other contractual agreements with third parties to protect our intellectual property. We maintain and support an active program to protect our intellectual property primarily through the filing of patent applications and the defense of issued patents against infringement. We are not currently engaged in any patent infringement suits. We implement a ring-fencing strategy of patenting core technology platforms related to sensors, sensing systems and human interface devices. This strategy is designed to provide a strong barrier against competition in our core sensor technologies while ensuring competitive advantages in applications of sensing systems and human machine interface devices in the event a competitor successfully circumvents the core sensor patents.
Our failure to obtain or maintain adequate protection for our intellectual property rights for any reason could hurt our competitive position. There is no guarantee that patents will be issued from the patent applications that we have filed or may file. Our issued patents may be challenged, invalidated or circumvented, and claims of our patents may not be of sufficient scope or strength, or issued in the proper geographic regions, to provide meaningful protection or any commercial advantage. See “Risk Factors” under Item 1A of this Form 10-K for further discussion of the risks associated with patents and intellectual property.
Our FSR® sensors are manufactured using proprietary screen-printing techniques. All proprietary aspects of the manufacturing process are currently conducted in-house at our U.S. and China manufacturing facilities to maintain quality and protect our force sensing technology from infringement. While screen-printing is a common process in various industries, the quality and precision of printing, as well as the specific processes required to make high-quality FSR® sensors, require considerable domain knowledge expertise and know how. We believe this expertise is difficult to replicate over the short term and, to our knowledge, no unrelated party has done so. As a result, we consider this expertise to be one of our more important trade secrets. We require our employees to sign nondisclosure agreements and seek to limit access to sensitive information to the greatest practical extent.
As of December 31, 2021, we held twenty-three (23) patents, and had fourteen (14) patents-pending. We group our patents into three general categories: sensors, which includes eight (8) patents expiring between 2022 and 2032; sensing systems, which includes four (4) patents expiring between 2029 and 2034; and human interface devices, which includes eleven (11) patents expiring between 2024 and 2036. Our intellectual property strategy involves filing patent applications in our strategic focus markets on a regular basis. We have also strengthened our patent portfolio to align with rapidly emerging market opportunities in IoT and smart surfaces. Our sensor fusion platform portfolio, for example, enables strategic pre-positioning in capturing intelligent multi-sensing applications including, for example, haptics. The will be enabled by emerging ultra low-power wireless technologies including WiFi, BLE, LoRaWAN®, as well as cellular technologies such as LTE-M and NB-IoT.
Competition
The markets for our products are highly competitive and subject to rapid advancement in design technology. We must identify and capture future market opportunities by developing and deploying value-added products.
We compete for market share based on our customers’ selection of our components over our competitors during the design phase of their products. Our ability to compete is dependent on the needs of our customers, how well our products address those needs, our corporate relationships, and a variety of other factors.
We offer a disruptive technology that is replacing outdated and undesirable approaches including switch technology. We often must convince companies to abandon older, proven but less elegant technologies and adopt our solutions. This change is supported by significant end-user demand for touch-sensitive solutions. We also compete against the highly commoditized capacitive sensing technology. However, our solutions are focused on providing functionality in situations where capacitive is not the appropriate solution, is unreliable or entirely unavailable. Our hybrid sensor fusion solutions better address our customers’ unique sensing and HMI challenges.
The markets for our products are characterized by significant price competition and we anticipate that our products will continue to face substantial pricing pressure. Our strategy of developing and offering more sophisticated solutions including smart surface for HMI applications will maintain our leading edge over our competitors.
8
Table of Contents
Sales and Marketing
We sell our HMI solutions and force sensing devices through our direct sales employees as well as outside sales representatives and distributors. We work directly with large multi-national companies, small start-up companies, technology design houses and original equipment manufacturers (“OEMs”). Our sales personnel have extensive engineering backgrounds and receive substantial support from our internal engineering resources. Sales frequently result from interactions between senior management, design engineers, procurement departments, and our sales personnel. We interact with our customers throughout the product development and order process. We maintain sales offices in the United States and Japan. We primarily utilize Digi-Key Electronics, based in Thief River Falls, Minnesota, as a global, full-service distributor of our standard products. In addition to Digi-Key Electronics, we have several representative companies located in key markets so we can provide local support to strategic customers in these regions.
Due to the technical nature of our products, the length of our sales cycle can vary from a few months to several years and requires continued participation from our sales, engineering and management teams. Our sales cycle for our custom solutions generally includes the following two phases:
Design Opportunity to Design Win
● Our sales and engineering team engages with the customer to establish the nature of the design and explore various technical applications that may fit the customer’s need.
● A customer might select one of our standard solutions or a custom design might be required to fulfill the customer’s product needs. Custom solutions might require engineering design fees and tooling costs.
● Product samples are provided to the customer and our team works with the customer to ensure product performance and address customer needs and specifications.
● A firm commitment from a customer’s engineering and/or purchasing organization or pre-production orders indicate a design win. In most cases, we are a sole-source supplier to our customer and cannot be easily and/or quickly replaced once the product goes into production.
Mass Production
● Once the customer has chosen our solution, they may move their product into the production phase. It may take several months or more to go from design win to production. Product lifespan varies dramatically depending on the marketplace and product. Consumer electronics may have a lifespan of six months to five years; industrial and automotive applications may continue for three to ten years, and medical product lifespans may continue past 20 years.
Our Customers
Our customers include many of the world’s leading electronics companies. They encompass large multi-national organizations as well as start-ups, design houses, original design manufacturers, OEMs and universities. We supply some of the world’s largest consumer electronics manufacturers, luxury and mid-market car companies, familiar names in the medical and industrial equipment markets, research engineers and designers entering the IoT market, and companies of all different sizes in other markets.
Our customers generally do not provide us with firm, long-term volume purchase commitments, opting instead, to issue purchase orders that they can cancel, reduce, or delay at any time. In order to meet the expectations of our customers, we must provide innovative HMI solutions on a timely and cost-effective basis. This requires us to match our design and production capacity with customer demand, manage inventory, maintain satisfactory delivery schedules, and meet performance goals.
Our customer base is widely dispersed geographically. Sales to customers located outside the United States have historically accounted for a significant percentage of our revenues, a trend we expect to continue. On a bill-to basis, international sales constituted 71% and 59% of our net revenues for the years ended December 31, 2021 and 2020, respectively, with sales in 2021 to customers in China, Japan, and Taiwan accounting for 29%, 16%, and 12% of net revenues, respectively.
9
Table of Contents
Future sales of our products will be based on, among other elements, expansion into adjacent markets, continued expansion of our product line, the acceptance of our product line, expansion into additional domestic and international markets, and our ability to maintain a competitive position against other technology providers.
For the year ended December 31, 2021, we had three customers that represented 17.0%, 14.7% and 14.7% of net revenues, respectively, and have been customers of ours for 8 years, 32 years, and 9 years, respectively. These same three customers represented 17.4%, 15.8% and 11.6% of net revenues for the year ended December 31, 2020.
Manufacturing Operations and Principal Suppliers
We have our own modern manufacturing facility of approximately 14,476 square feet in Shenzhen, China that is ISO 9001, ISO 14001 and ISO 13485 certified. We plan to start the process of acquiring IATF 16949 certification in 2022 as our automotive customer base expands. We work hard to meet current environmental and sustainability standards required by our customers and legislation in various geographic markets. All products are RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) compliant. We also monitor all of our suppliers to ensure that Conflict Minerals are eliminated from our supply chain.
We purchase our materials from outside suppliers. We carefully select suppliers based on their ability to provide quality parts and components that meet technical specifications. We actively monitor these suppliers, but we are subject to substantial risks associated with the performance of our suppliers. We source certain of our components from single-suppliers, including multinational conglomerates Henkel, DuPont, Solvay, SABIC and 3M, which increases the risk of shortages and shipment delays and decreases our ability to negotiate with that supplier. Many of our products are subject to qualification testing and approval by our customers, which includes approval of the materials used in a customer’s product. These single-source materials, however, are available from other suppliers, and while their procurement from other sources likely would necessitate additional approvals from our customers and might result in short-term disruption to our business, we do have options to purchase single-sourced materials from alternative suppliers should the need arise.
Engineering, Research and Development
Rapid advancements in process technologies and increasing levels of functional integration characterize the market for our products. We believe that our future success will depend largely on our ability to continue improving our products and our process technologies, and to develop or acquire new technologies.
In 2021, we launched our new Global Product Development and Materials Science Center in Camarillo, California, where our VP of Engineering & Advanced Materials is located, along with other current and future resources. At this location, we focus on new product development including, among other areas, materials science and printed electronics. We also maintain a core embedded software engineering team in Singapore, and we expect to launch an engineering, research and development center in the United Kingdom in 2022.
We also operate an engineering center in our facility in Shenzhen, China, which is focused on sustaining engineering, customer support, quality control and new product introduction.
The global R&D team pursues scientific research, technology platform development and advanced product development in areas of materials science, printed electronics devices and manufacturing processes, and multi-disciplinary system engineering. The global R&D centers support strategic partnerships with key partners in electronics manufacturing services, digital manufacturing including 3D printing, and product development. This team also explores opportunities to work on government funded research projects that are aligned with our technology competencies.
Our Employees
As of December 31, 2021, we had 89 full-time employees worldwide. Our employees, listed in population size order from largest to smallest, are in the following departments: operations, R&D, administration, and sales. Our ability to attract and retain qualified personnel is essential to our continued success. None of our employees are represented by a collective bargaining agreement. We believe our employee relations are good.
10
Table of Contents